Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Franza, A., M. Marshall, A., Kamal Haji, T., Abdelatif, A. O., Carbonari, S. & Morici, M. (2017). A simplified elastic analysis of tunnel–piled structure interaction. Tunnelling and Underground Space Technology Journal, 61, 104-121. https://doi.org//10.1016/j.tust.2016.09.008

Franza, A. & M. Marshall, A. (2018). Centrifuge modeling study of the response of piled structures to tunneling. Journal of Geotechnical and Geoenvironmental Engineering, 144(2), Article 04017109. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001751

Kamal Haji, T., M. Marshall, A. & Franza, A. (2018). Mixed empirical–numerical method for investigating tunnelling effects on structures. Tunnelling and Underground Space Technology Journal, 73, 92-104. https://doi.org/10.1016/j.tust.2017.12.008

Idinyang, S., Franza, A., Heron, C. M. & M. Marshall, A. (2019). Real–time data coupling for hybrid testing in a geotechnical centrifuge. International Journal of Physical Modelling in Geotechnics, 19(4), 208-220. https://doi.org/10.1680/jphmg.17.00063

Franza, A., M. Marshall, A. & Zhou, B. (2019). Greenfield tunnelling in sands: the effects of soil density and relative depth. Geotechnique, 69(4), 297-307. https://doi.org/10.1680/jgeot.17.P.091

Franza, A. & M. Marshall, A. (2019). Centrifuge and real–time hybrid testing of tunneling beneath piles and piled buildings. Journal of Geotechnical and Geoenvironmental Engineering, 145(3), Article 04018110. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002003

Franza, A. & J. DeJong, M. (2019). Elastoplastic solutions to predict tunneling−induced load redistribution and deformation of surface structure. Journal of Geotechnical and Geoenvironmental Engineering, 145(4), Article 04019007. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002021

Franza, A. & M. Marshall, A. (2019). Empirical and semi–analytical methods for centrifuge tunnelling–induced ground movements in sands. Tunnelling and Underground Space Technology Journal, 88, 47-62. https://doi.org/10.1016/j.tust.2019.02.016

Zhang, G., Wang, S., Qiu, D., Wang, B., Wu, X. & Wu, M. (2021). Investigation on the performance of hydroxyethyl methyl cellulose modified cement mortars with Portland cement-calcium sulfoaluminate cement binders. Construction and Building Materials, 283, Article 122721. https://doi.org/10.1016/j.conbuildmat.2021.122721

Franza, A., Ritter, S. & J. DeJong, M. (2020). Continuum solutions for tunnel–building interaction and a modified framework for deformation prediction. Geotechnique, 70(2), 108-122. https://doi.org/10.1680/jgeot.17.P.279

Franza, A., Acikgoz, S. & J. DeJong, M. (2020). Timoshenko beam models for the coupled analysis of building response to tunnelling. Tunnelling and Underground Space Technology Journal, 96, Article 103160. https://doi.org/10.1016/j.tust.2019.103160

Ritter, S., Giardina, G., Franza, A. & J. DeJong, M. (2020). Building deformation caused by tunneling: centrifuge modeling. Journal of Geotechnical and Geoenvironmental Engineering, 146(5), Article 04020017. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002223

Bucinskas, P., Ntotsios, E., Thompson, D. J. & Andersen, L. V. (2021). Modelling train-induced vibration of structures using a mixed-frame-of-reference approach. Journal of Sound and Vibration, 491, Article 115575. https://doi.org/10.1016/j.jsv.2020.115575

M. Marshall, A., Franza, A. & W. Jacobsz, S. (2020). Assessment of the posttunneling safety factor of piles under drained soil conditions. Journal of Geotechnical and Geoenvironmental Engineering, 146(9), Article 04020097. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002348

Franza, A., M. Marshall, A. & Jimenez, R. C. (2021). Nonlinear soil−pile interaction induced by ground settlements: displacements and internal force. Geotechnique, 71(3), 239-249. https://doi.org/10.1680/jgeot.19.P.078

Franza, A., Deck, O. & J. DeJong, M. (2020). Charts for the mining-induced deflection of buildings. Canadian Geotechnical Journal, 57(12), 2020-2026. https://doi.org/10.1139/cgj-2019-0041

Sauca, A., Mortensen, N., Drustrup, A. & Abbiati, G. (2021). Experimental validation of a hybrid fire testing framework based on dynamic relaxation. Fire Safety Journal, 121, Article 103315. https://doi.org/10.1016/j.firesaf.2021.103315

Xu, J., Franza, A., M. Marshall, A., Losacco, N. & Boldini, D. (2021). Tunnel–framed building interaction: comparison between raft and separate footing foundations. Geotechnique, 71(7), 631–644. https://doi.org/10.1680/jgeot.19.P.393

Xu, J., Franza, A. & M. Marshall, A. (2020). Response of framed buildings on raft foundations to tunneling. Journal of Geotechnical and Geoenvironmental Engineering, 146(11), Article 04020120. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002376

Acikgoz, S., Franza, A., J. DeJong, M. & Mair, R. (2021). Cracked equivalent beam models for assessing tunneling−induced damage in masonry buildings. Journal of Geotechnical and Geoenvironmental Engineering, 147(2). https://doi.org/10.1061/(ASCE)GT.1943-5606.0002443

Franza, A., Losacco, N., Ledesma, A., Viggiani, G. M. B. & Jimenez, R. C. (2021). Protecting surface and buried structures from tunnelling using pile walls: a prediction model. Canadian Geotechnical Journal, 58(10), 1590-1602. https://doi.org/10.1139/cgj-2020-0476

Di Paolo, M., Nuzzo, I., Caterino, N. & Georgakis, C. T. (2021). A friction-based passive control technique to mitigate wind induced structural demand to wind turbines. Engineering Structures, 232, Article 111744. https://doi.org/10.1016/j.engstruct.2020.111744

Tarpø, M., Friis, T., Georgakis, C. & Brincker, R. (2021). Full-field strain estimation of subsystems within time-varying and nonlinear systems using modal expansion. Mechanical Systems and Signal Processing, 153, Article 107505. https://doi.org/10.1016/j.ymssp.2020.107505

Tarpø, M. G., Georgakis, C. T., Brandt, A. & Brincker, R. (2021). Experimental determination of structural damping of a full‐scale building with and without tuned liquid dampers. Structural Control and Health Monitoring, 28(3), Article e2676. https://doi.org/10.1002/stc.2676

Kabel, T. (2021). Mapping Breaking Ocean Waves using Novel LIDAR Equipment. Århus Universitet.

Maienza, C., Avossa, A. M., Ricciardelli, F., Coiro, D. & Georgakis, C. T. (2020). Sensitivity analysis of cost parameters for floating offshore wind farms: An application to Italian waters. Journal of Physics: Conference Series, 1669(1), Article 012019. https://doi.org/10.1088/1742-6596/1669/1/012019

Zhao, Y., Shi, T., Cao, L., Kan, L. & Wu, M. (2021). Influence of steel slag on the properties of alkali-activated fly ash and blast-furnace slag based fiber reinforced composites. Cement and Concrete Composites, 116, Article 103875. https://doi.org/10.1016/j.cemconcomp.2020.103875

Knudsen, J., Sørensen, K. K., Steenfelt, J. S. & Trankjær , H. (2021). Tension tests on bored instrumented piles installed in marine Eocene clay. IOP Conference Series: Earth and Environmental Science, 710(1), Article 012034. https://doi.org/10.1088/1755-1315/710/1/012034

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2020). Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand. International Journal of Geoengineering Case Histories, 5(3), 170-181. https://doi.org/10.4417/IJGCH-05-03-03

Stutz, H. H., Norlyk, P., Sørensen, K., Andersen, L. V., Sørensen, K. K. & Clausen, J. C. S. (2020). Finite element modelling of an energy-geomembrane underground pumped hydroelectric energy storage system. Paper presented at 2nd International Conference on Energy Geotechnics 2020, La Jolla, United States. https://doi.org/10.1051/e3sconf/202020507001

Georgakis, C. T., Fujino, Y., Hopf, S., Müller, M., Subira, F., Ostenfeld, K. H., Svensson, S. E., Hindhede, L., Krogstrup, M. J. & Rumpelt, T. (2020). The Chirajara Bridge Collapse. In IABSE Conference 2020: Risk Intelligence of Infrastructures (pp. 18-32). International Association for Bridge and Structural Engineering.

Clausen, J. C. S. (2020). Comment to “A method for smoothing multiple yield functions” by Wilkins, Spencer, Jain and Gencturk. Int J Numer Methods Eng. 2020; 121:434–449. International Journal for Numerical Methods in Engineering, 121(24), 5784-5788. https://doi.org/10.1002/nme.6507

Durkin, JD. & Georgakis, C. T. (2020). Why This Bridge Is Suddenly Everywhere - Cheddar Explains. Pictures, Video and sound recordings (digital), Cheddar. https://www.youtube.com/watch?v=W8_wRcGUud4&feature=youtu.be

Abbiati, G., Lanese, I., Eftekhar Azam, S., Bursi, O. S. & Pavese, A. (2021). A framework for hybrid simulation with online model updating suitable for hard real-time computing. Structural Control and Health Monitoring, 28(1), Article e2652. https://doi.org/10.1002/stc.2652

Abbiati, G., Di Filippo, R., Sayginer, O., S. Bursi, O. & Paolacci, F. (2020). Formulation of Fragility Curves for Petrochemical Plant Components Based on Synthetic Ground Motion Records and Surrogate Modeling. In 17th World Conference on Earthquake Engineering, 17WCEE Article C002526

Lamperti Tornaghi, M., Tsionis, G., Pegon, P., Molina, J., Peroni, M., Korzen, M., Tondini, N., Covi, P., Abbiati, G., Antonelli, M. & Gilardi, B. (2021). Experimental study of braced steel frames subjected to fire after earthquake. In 2021 17WCEE Proceedings Article C001800

Abbiati, G. & Marelli, S. (2020). Sequential Experimental Design of Hybrid Simulations For Bayesian Calibration Of Computational Simulators. In 17th World Conference on Earthquake Engineering, 17WCEE Article C002356 https://www.researchgate.net/publication/342833329_SEQUENTIAL_EXPERIMENTAL_DESIGN_OF_HYBRID_SIMULATIONS_FOR_BAYESIAN_CALIBRATION_OF_COMPUTATIONAL_SIMULATORS

Sauca, A., Mortensen, N., Drustrup, A. & Abbiati, G. (2021). Development of a Thermomechanical Hybrid Testing Platform for Fire Following Earthquake Simulation. In 2021 17WCEE Proceedings Article C001475

Abbiati, G., Covi, P., Tondini, N., S. Bursi, O. & Stojadinovic, B. (2020). A Real-Time Hybrid Fire Simulation Method Based on Dynamic Relaxation and Partitioned Time Integration. Journal of Engineering Mechanics, 146(9), Article 04020104. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001826

Norlyk, P., Sørensen, K., Andersen, L. V., Sørensen, K. K. & Stutz, H. H. (2020). Holistic simulation of a subsurface inflatable geotechnical energy storage system using fluid cavity elements. Computers and Geotechnics, 127, Article 103722. https://doi.org/10.1016/j.compgeo.2020.103722

Wang, T., Wu, K. & Wu, M. (2020). Development of green binder systems based on flue gas desulfurization gypsum and fly ash incorporating slag or steel slag powders. Construction and Building Materials, 265, Article 120275. https://doi.org/10.1016/j.conbuildmat.2020.120275

Vigsø, M. & Georgakis, C. (2020). Predicting wave load distributions using indirect methods. Ocean Engineering, 214, Article 107682. https://doi.org/10.1016/j.oceaneng.2020.107682

Wu, M., Wang, T. & Wang, S. (2020). Corrosion and sulfur-related bacteria. In P. Lens (Ed.), Environmental Technologies to Treat Sulfur Pollution: Principles and Engineering -2nd Edition (2 ed., pp. 133-166). IWA Publishing. https://doi.org/10.2166/9781789060966_0133

Wang, S., Zhang, G., Wang, B. & Wu, M. (2020). Mechanical strengths and durability properties of pervious concretes with blended steel slag and natural aggregate. Journal of Cleaner Production, 271, Article 122590. https://doi.org/10.1016/j.jclepro.2020.122590

Abbiati, G., Marelli, S., Tsokanas, N., Sudret, B. & Stojadinović, B. (2021). A global sensitivity analysis framework for hybrid simulation. Mechanical Systems and Signal Processing, 146, Article 106997. https://doi.org/10.1016/j.ymssp.2020.106997

Yıldırım, H. C., Remes, H. & Nussbaumer, A. (2020). Fatigue properties of as-welded and post-weld-treated high-strength steel joints: The influence of constant and variable amplitude loads. International Journal of Fatigue, 138, Article 105687. https://doi.org/10.1016/j.ijfatigue.2020.105687

Bucinskas, P. & Andersen, L. V. (2020). Dynamic response of vehicle–bridge–soil system using lumped-parameter models for structure–soil interaction. Computers and Structures, 238, Article 106270. https://doi.org/10.1016/j.compstruc.2020.106270

Andersen, L. V., Frier, C., Pedersen, L. & Persson, P. (2020). Influence of furniture on the modal properties of wooden floors. In R. Barthorpe (Ed.), Model Validation and Uncertainty Quantification, Volume 3 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 (pp. 197-204). Springer. https://doi.org/10.1007/978-3-030-12075-7_22

Frier, C., Pedersen, L. & Andersen, L. V. (2020). Floor vibrations and elevated non-structural masses. In S. Pakzad (Ed.), Dynamics of Civil Structures, Volume 2 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019 (pp. 103-110). Springer. https://doi.org/10.1007/978-3-030-12115-0_13

Andersen, L. V. (2020). Dynamic soil–structure interaction of polypod foundations. Computers and Structures, 232, Article 105966. https://doi.org/10.1016/j.compstruc.2018.07.007

Displaying results 201 to 250 out of 772

Back to the main page

Revised 18.09.2024

AU Engineering