Publications

Under publication list you can find a complete list of the publications that are written by employees at the Publications at Department of Civil and Architectural Engineering for example journal articles, books, reports etc.

Under PhD dissertations you will find the department's published PhD dissertations.

Publication list

Sort by: Date | Author | Title

Shao, K., Wang, T. & Wu, M. (2025). Abrasion Damage of Concrete for Hydraulic Structures after Exposure to Freeze-thaw Cycles. I O P Conference Series: Earth and Environmental Science, 1450(1), Article 012001. https://doi.org/10.1088/1755-1315/1450/1/012001

Laustsen, L. M., Bergmann, M., Sigsgaard, T., Petersen, S. & Gabel, C. (2025). Air changes per hour in residential buildings and health outcomes: a scoping review. Indoor Environments, 2(2). https://doi.org/10.1016/j.indenv.2025.100102

Ioakim, A., Greś, S., Döhler, M., Prendergast, L. J. & Chatzi, E. (2025). An indirect data-driven model-updating framework to estimate soil–pile interaction parameters using output-only data. Engineering Structures, 328, Article 119699. https://doi.org/10.1016/j.engstruct.2025.119699

Wang, J. & Wu, M. (2025). A preliminary study on an effective and simplistic self-healing concept for cement using coarse clinker particles as the healing agent. Cement and Concrete Research, 193, Article 107859. https://doi.org/10.1016/j.cemconres.2025.107859

Bugenings, L. A. (2025). Assessing and Mitigating Overheating in Danish Residential Buildings by Employing Mixed Methods Research: Investigating a Natural Ventilation Strategy for Building Renovation.

Irani, N., Prada-Sarmiento, L. F., Tafili, M., Salimi, M., Wichtmann, T. & Triantafyllidis, T. (2025). Assessment of Free Energy Functions for Sand. International Journal for Numerical and Analytical Methods in Geomechanics, 49(1), 132-150. https://doi.org/10.1002/nag.3852

Schmüdderich, C., Herz, C., Albared, A., Machaček, J., Prada-Sarmiento, L. F., Staubach, P. & Wichtmann, T. (2025). A two-step dynamic FEM-FELA approach for seismic slope stability assessment. Acta Geotechnica, 20(1), 303-322. Article 103687. https://doi.org/10.1007/s11440-024-02443-4

Shi, X. & Wu, M. (2025). Cement degradation in CO2-saturated water and the impact of liquid to solid ratio: an experimental and thermodynamic modelling study. Paper presented at 12th International Conference on Fracture Mechanics for Concrete and Concrete Structures, Veinna. https://doi.org/10.21012/FC12.1289

Shen, C., Zhang, D., Clausen, J., Wan, Y. & Zhang, G. (2025). Centrifuge Model Tests on Deformation Characteristics of River Embankments Improved by Circular and Grid-Form Deep Mixed Columns. International Journal of Civil Engineering. Advance online publication. https://doi.org/10.1007/s40999-025-01103-2

D’Arenzo, G., Rigo, P., Nicolussi, V., Pozza, L. & Casagrande, D. (2025). Characterisation of the rigid diaphragm conditions for cross laminated timber floors. Bulletin of Earthquake Engineering, 23(4), 1759-1794. Article 111560. https://doi.org/10.1007/s10518-024-02025-5

Kamari, A. (2025, Feb 13). Closing the digitalization gap throughout the whole lifecycle of building projects? Autodesk is in the right direction! LinkedIn. https://www.linkedin.com/pulse/closing-digitalization-gap-throughout-whole-lifecycle-aliakbar-kamari-h2vaf/?trackingId=U5RVv9mHRhWNlP1VSA%2Bs5g%3D%3D

Fathollahi, A. & Beatini, V. (2025). Concept Design of Variable Density, Flat Cut Active Bending Shells. Abstract from International Symposium on Architecture, Technology, and Innovation , Izmir, Turkey.

Zanabria, E., Murguia, D. & Pérez, C. T. (2025). Construction workers' safety perceptions and job satisfaction: A comparative analysis of Denmark and Peru. Annual Conference of the International Group for Lean Construction, IGLC, 33, 1046-1057. https://doi.org/10.24928/2025/0125

Bugenings, L. A., Kamari, A. (Ed.) & Rong, L. (Ed.) (2025). Dataset of Experimental Investigations of a Full-Scale Louvre Element. Dataset, Zenodo. https://doi.org/10.5281/zenodo.14614813

Salimi, M., Tafili, M., Prada-Sarmiento, L. F., Irani, N., Triantafyllidis, T. & Wichtmann, T. (2025). DEM-CFM Analysis of Undrained Cyclic Behavior in Transversely Isotropic Granular Soils under True Triaxial Loading Paths. Journal of Geotechnical and Geoenvironmental Engineering, 151(5), Article 04025022. https://doi.org/10.1061/JGGEFK.GTENG-12485

Fathollahi, A. & Beatini, V. (2025). Design Concept of Variable, Flat Cut Bending-Active Shells. Architecture, Civil Engineering, Environment, 18(1), 97-111. https://doi.org/10.2478/acee-2025-0008

Zhang, C., Li, Y., Shi, X., Wang, Z., Li, T., Liang, R. & Sun, G. (2025). Effect of internal curing by alkali-resistant superabsorbent polymers on workability, mechanical property, hydration, pore structure and shrinkages of high-performance cementitious materials. Case Studies in Construction Materials, 22, Article e04309. https://doi.org/10.1016/j.cscm.2025.e04309

Zhang, F., Pang, K., Li, J., Xu, W., Du, J., Wang, J., Zhang, J., Liu, Q. & Xiao, H. (2025). Effect of micro-cellulose fiber on the mechanical, shrinkage properties and ballistic impact resistance of high-performance cement composites. Construction and Building Materials, 463, Article 139963. https://doi.org/10.1016/j.conbuildmat.2025.139963

K. L. Wong, E., Franza, A. & Viggiani, G. M. B. (2025). Empirical prediction of horizontal movements induced by tunnelling in fine-grained soils. Canadian Geotechnical Journal, 62. https://doi.org/10.1139/cgj-2024-0049

Alesci, R., Fiorentini, M., Zanetti, E. & Scoccia, R. (2025). Energy flexibility quantification of the building's thermal mass for radiator and floor heating systems. Energy, 325, Article 135903. https://doi.org/10.1016/j.energy.2025.135903

Geppetti, A., Prada-Sarmiento, L. F., Wichtmann, T., Ciardi, G., Facciorusso, J. & Madiai, C. (2025). Experimental and numerical investigations on the seismic behaviour of a tailings storage facility in Italy. Soil Dynamics and Earthquake Engineering, 194, Article 109341. https://doi.org/10.1016/j.soildyn.2025.109341

Bugenings, L. A., Kamari, A. & Rong, L. (2025). Experimental Investigations of a Full-Scale Louvre Element: Methodology, description and result presentation. AU Library Scholarly Publishing Services. https://doi.org/10.7146/aul.544

Schultz, C. P. L. & Kamari, A. (2025). Exploring the renovation design space: A new iterative approach based on scenario distance metrics and resampling strategies. Building Simulation, 18(5). https://doi.org/10.1007/s12273-025-1267-1

Hernandez-Guardado, A., Petrella, F. & Franza, A. (2025). Ground movements induced by a deep excavation in Copenhagen: Comparison of prediction methods with monitoring data. In Tunnelling into a Sustainable Future – Methods and Technologies: Proceedings of the ITA-AITES World Tunnel Congress 2025 (WTC 2025), 9-15 May 2025, Stockholm, Sweden (pp. 1460) https://doi.org/10.1201/9781003559047-188

Perez, C. T., Madushanka, M., Loyola, L., Ergul, M. & Salling, S. T. (2025). Health and Safety Perceptions of Construction Workers in Denmark. In 23rd CIB World Building Congress, 19th – 23rd May 2025, Purdue University, West Lafayette, USA

Hu, H., Ma, X., Zuo, J., She, A., Wei, Y., Yao, W. & Wu, M. (2025). High-volume fly ash mortar mixes containing waste dolomite powders: Early-age properties, hydration characteristics, microstructure, and sustainability assessment. Construction and Building Materials, 484, Article 141899. https://doi.org/10.1016/j.conbuildmat.2025.141899

Li, Z., Bai, Y. & Luo, Q. (2025). Influence of humidity conditions on the performance of CO₂-cured LC³. Case Studies in Construction Materials, 22, Article e04747. https://doi.org/10.1016/j.cscm.2025.e04747

Mallardi, M. G., D'Arenzo, G., Giordano, P. F. & Limongelli, M. P. (2025). Influence of perpendicular wall interactions on the lateral behaviour of multi-storey cross-laminated timber structures: An analytical and numerical study. Engineering Structures, 340, Article 120727. https://doi.org/10.1016/j.engstruct.2025.120727

Han, F., Wang, J., Ji, X., Chen, S., Liu, J., Wu, M. & Liu, J. (2025). Insights into the hydration kinetics and microstructural evolution of ultra-high performance cementitious composite at mid-to-low curing temperatures. Construction and Building Materials, 468, Article 140403. https://doi.org/10.1016/j.conbuildmat.2025.140403

Johansen, K. W., Schultz, C. & Teizer, J. (2025). Knowledge graph exploitation to enhance the usability of risk assessment in construction safety planning. Advanced Engineering Informatics, 65, Article 103305. https://doi.org/10.1016/j.aei.2025.103305

Tang, C., Franza, A., Xu, J. & Marshall, A. (2025). Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study. Geotechnique, 75(4), 550-562. https://doi.org/10.1680/jgeot.23.00201

Fiirgaard, T., Madushanka, M. & Perez, C. T. (2025). Location-Based Work Sampling: Application and Evaluation for Workflow Issue Identification. In Proc. of the 23rd CIB World Building Congress, 19th – 23rd May 2025, Purdue University, West Lafayette, USA

Pedersen, K. B., Stefankovics, G., Marxen, M. V. & Wandahl, S. (2025). Method for estimating and planning carbon emissions. In Proceedings of the 33rd Annual Conference of the International Group for Lean Construction (IGLC 33) (Vol. 33, pp. 1197-1207) https://doi.org/10.24928/2025/0271

Hao, X., Liu, K., Zhu, L., Rong, L., Jiang, D. & Bai, L. (2025). Migration and risk assessment of heavy metals from swine manure in an organic fertilizer - soil - ryegrass - rex rabbit system: Based on field trials. Science of the Total Environment, 959, Article 178332. https://doi.org/10.1016/j.scitotenv.2024.178332

Bugenings, L. A., Andersen, K. P., Rong, L. & Kamari, A. (2025). Mitigating overheating in renovated Danish residential buildings: The potential of implementing louvred openings. Journal of Building Engineering , 111. https://doi.org/10.1016/j.jobe.2025.113034

Pizarro, D., Kovarbašić, M., Abbiati, G. & Stojadinović, B. (2025). Multi-Axial Subassemblage Testing System for Hybrid Simulation With Large-Scale Structural Components. Earthquake Engineering and Structural Dynamics, 54(8), 2084-2105. https://doi.org/10.1002/eqe.4351

Yang, R., Zhang, W., Choi, C. Y., Rong, L., Zhang, G., Liu, K. & Wang, X. (2025). Numerical evaluation on spray cooling to mitigate heat stress in cattle using computational fluid dynamics. Computers and Electronics in Agriculture, 229, Article 109775. https://doi.org/10.1016/j.compag.2024.109775

Liu, Q., Andersen, L. V., Wu, M., Zhang, M. & Snoeck, D. (2025). Numerical investigations of the abrasion behavior of concrete based on a coupled Eulerian–Lagrangian approach. Computers and Structures, 315, Article 107808. https://doi.org/10.1016/j.compstruc.2025.107808

Al-Khiami, M. I., Lindhard, S. M. & Wandahl, S. (2025). Paradox in Practice: Work-Related Musculoskeletal Disorder Prevalence and Reporting among Construction Workers in Kuwait and Denmark. Journal of Construction Engineering and Management, 151(7), Article 04025078. https://doi.org/10.1061/JCEMD4.COENG-15899

Martinez Ribon, J. G. T., Giménez, Z., Salazar, L., Alva, L., F Alarcon, L., Yeung, T. & Sacks, R. (2025). Practices and Barriers to the Adoption of Digital Twin Construction in Latin America. In Proceedings of the 33 rd Annual Conference of the International Group for Lean Construction (IGLC33) (pp. 598-609). IGLC. https://doi.org/10.24928/2025/0238

Al-Khiami, M. L., Lindhard, S. & Wandahl, S. (2025). Prevalence of work-related musculoskeletal disorders and associated sociocultural reporting behaviors in Kuwait's construction industry. Work: A Journal of Prevention, Assessment & Rehabilitation. Advance online publication. https://doi.org/10.1177/10519815251325780

Hao, X., Sang, W., Li, F., Shen, L., Zhu, L., Rong, L., Jiang, D. & Bai, L. (2025). Regulation of antibiotic resistance gene rebound by degrees of microecological niche occupation by microbiota carried in additives during the later phases of swine manure composting. Ecotoxicology and Environmental Safety, 294, Article 118112. https://doi.org/10.1016/j.ecoenv.2025.118112

Zhao, Y., Xiong, C., Rong, L., Luo, Z., Hussein, T. & Zhao, T. (2025). Research on an adaptive prediction method for restaurant air quality based on occupancy detection. Building and Environment, 267(A), Article 112145. https://doi.org/10.1016/j.buildenv.2024.112145

Shi, X., Zhang, C., Gupta, K. K., Ambat, R. & Wu, M. (2025). Risks of cement and rock-cement-metal interface degradation in geological carbon sequestration reservoirs: Mechanisms, influencing factors and mitigation measures. Carbon Capture Science and Technology, 15, Article 100419. https://doi.org/10.1016/j.ccst.2025.100419

Gabel, C., Elholm, G., Petersen, S. & Sigsgaard, T. (2025). Seasonal indoor air quality, self-reported health and comfort amongst tenants living at Danish multi-family social housing sites. Indoor and built environment, 34(1), 135-148. https://doi.org/10.1177/1420326X241274516

Modé, P., Demartino, C., Georgakis, C. T. & Lagaros, N. D. (2025). Short-term extreme wind speed forecasting using dual-output LSTM-based regression and classification model. Journal of Wind Engineering and Industrial Aerodynamics, 259, Article 106035. https://doi.org/10.1016/j.jweia.2025.106035

Aita, D., Beatini, V., Caruso, H., Garavaglia, E. & Sgambi, L. (2025). Some remarks on non-standard plastic behaviour with Coulomb’s friction starting from an unconventional stone flat arch. Engineering Structures, 326, Article 119539. https://doi.org/10.1016/j.engstruct.2024.119539

Miah, M. J., Thygesen, J., Simonsen, M. E., Nielsen, R. P. & Wu, M. (2025). Strengthening the bulk properties of cement mortar through promoted in-situ formation of hydroxyapatite: Feasibility and perspectives. Construction and Building Materials, 459, Article 139773. https://doi.org/10.1016/j.conbuildmat.2024.139773

Zhang, C., Shi, X., Li, Y., Gu, Y., Jiang, J., Wang, Z. & Sun, G. (2025). Study on the adaptability of Superabsorbent polymers (SAP) in the high-performance cementitious materials (HPCM) based on orthogonal experimental. Journal of Building Engineering , 105, Article 112521. https://doi.org/10.1016/j.jobe.2025.112521

Gres, S., Döhler, M., Dertimanis, V. & Chatzi, E. (2025). Subspace-based noise covariance estimation for Kalman filter in virtual sensing applications. Mechanical Systems and Signal Processing, 222(111772), Article 111772. https://doi.org/10.1016/j.ymssp.2024.111772

Displaying results 1 to 50 out of 585

PhD dissertations

At the Department of Civil and Architectural Engineering, PhD dissertations are published via Aarhus University Library's/State and University Library's online E-books platform that is open access. You can find the published dissertations by following the link below.

PhD dissertations at the Department of Civil and Architectural Engineering

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revised 18.09.2024

AU Engineering