Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Abbiati, G., Marelli, S., Tsokanas, N., Sudret, B. & Stojadinović, B. (2021). A global sensitivity analysis framework for hybrid simulation. Mechanical Systems and Signal Processing, 146, Article 106997. https://doi.org/10.1016/j.ymssp.2020.106997

Yıldırım, H. C., Remes, H. & Nussbaumer, A. (2020). Fatigue properties of as-welded and post-weld-treated high-strength steel joints: The influence of constant and variable amplitude loads. International Journal of Fatigue, 138, Article 105687. https://doi.org/10.1016/j.ijfatigue.2020.105687

Bucinskas, P. & Andersen, L. V. (2020). Dynamic response of vehicle–bridge–soil system using lumped-parameter models for structure–soil interaction. Computers and Structures, 238, Article 106270. https://doi.org/10.1016/j.compstruc.2020.106270

Andersen, L. V., Frier, C., Pedersen, L. & Persson, P. (2020). Influence of furniture on the modal properties of wooden floors. In R. Barthorpe (Ed.), Model Validation and Uncertainty Quantification, Volume 3 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 (pp. 197-204). Springer. https://doi.org/10.1007/978-3-030-12075-7_22

Frier, C., Pedersen, L. & Andersen, L. V. (2020). Floor vibrations and elevated non-structural masses. In S. Pakzad (Ed.), Dynamics of Civil Structures, Volume 2 - Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019 (pp. 103-110). Springer. https://doi.org/10.1007/978-3-030-12115-0_13

Andersen, L. V. (2020). Dynamic soil–structure interaction of polypod foundations. Computers and Structures, 232, Article 105966. https://doi.org/10.1016/j.compstruc.2018.07.007

Di Filippo, R., Abbiati, G., Sayginer, O., Covi, P., Bursi, O. S. & Paolacci, F. (2019). Numerical surrogate model of a coupled tank-piping system for seismic fragility analysis with synthetic ground motions. In Seismic Engineering (Vol. 8). Article PVP2019-93685 American Society of Mechanical Engineers. https://doi.org/10.1115/PVP2019-93685

Miraglia, G., Petrovic, M., Abbiati, G., Mojsilovic, N. & Stojadinovic, B. (2020). A model-order reduction framework for hybrid simulation based on component-mode synthesis. Earthquake Engineering and Structural Dynamics, 49(8), 737-753. https://doi.org/10.1002/eqe.3262

Vigsø, M. B. & Georgakis, C. T. (2020). Estimating loads from breaking waves using operational modal analysis. In Structures, Safety, and Reliability: OMAE2020 Article 19170 American Society of Mechanical Engineers.

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2020). Application of Distributed Fibre Optic Cables in Piles. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 51(1), 94-102. Article 12. http://seags.ait.asia/journals/33953-seags-agssea-journal-march-2020/

Maienza, C., Avossa, A. M., Ricciardelli, F., Coiro, D., Troise, G. & Georgakis, C. T. (2020). A life cycle cost model for floating offshore wind farms. Applied Energy, 266, Article 114716. https://doi.org/10.1016/j.apenergy.2020.114716

Lees, A. S. & Clausen, J. C. S. (2020). Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests. Canadian Geotechnical Journal, 57(3), 448-452. https://doi.org/10.1139/cgj-2019-0036

Clausen, J. C. S. (2020). Mohr Envelope Elastoplasticity. Journal of Engineering Mechanics, 146(5), Article 04020025. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001734

Wang, T., Wu, K., Kan, L. & Wu, M. (2020). Current understanding on microbiologically induced corrosion of concrete in sewer structures: A review of the evaluation methods and mitigation measures. Construction and Building Materials, 247, Article 118539. https://doi.org/10.1016/j.conbuildmat.2020.118539

Wang, T. & Wu, M. (2021). Pore size distribution of cement based materials determined by dynamic water vapor sorption and low temperature calorimetry. In I. B. Valente, A. Ventura Gouveia & S. S. Dias (Eds.), Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020): Volume 2: New Materials and Structures for Ultra-durability (pp. 355-367). Springer. https://doi.org/10.1007/978-3-030-76551-4_32

Kan, L., Shi, R., Zhao, Y., Duan, X. & Wu, M. (2020). Feasibility study on using incineration fly ash from municipal solid waste to develop high ductile alkali-activated composites. Journal of Cleaner Production, 254, Article 120168. https://doi.org/10.1016/j.jclepro.2020.120168

Kan, L., Wang, W., Liu, W. & Wu, M. (2020). Development and Characterization of Fly Ash Based PVA Fiber Reinforced Engineered Geopolymer Composites Incorporating Metakaolin. Cement and Concrete Composites, 108, Article 103521. https://doi.org/10.1016/j.cemconcomp.2020.103521

Janusz, P. A., Sørensen, K. K., Clausen, O. R. & Andresen, K. J. (2021). Influence of sample conditions on shear wave velocity measurements in a sedimentary stiff clay. Marine Georesources & Geotechnology, 39(4), 448-458. https://doi.org/10.1080/1064119X.2020.1711833

Vigsø, M. B. & Georgakis, C. T. (2020). Estimating loads from breakings waves using operational modal analysis. In ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering

Vigsø, M. B. & Georgakis, C. T. (2020). Predicting wave load distributions using indirect methods.

Wu, M., Wang, T., Wu, K. & Kan, L. (2020). Microbiologically induced corrosion of concrete in sewer structures: A review of the mechanisms and phenomena. Construction and Building Materials, 239, Article 117813. https://doi.org/10.1016/j.conbuildmat.2019.117813

Abbiati, G., Lanese, I., Pavese, A. & S. Bursi, O. (2019). A State-Space Partitioned Time Integration Algorithm for Real-Time Hybrid Simulation with Nonlinear Numerical Subdomains. In E. Oñate, M. Papadrakakis & B. A. Schrefler (Eds.), VIII International Conference on Computational Methods for Coupled Problems in Science and Engineering (pp. 320-330). International Center for Numerical Methods in Engineering. https://congress.cimne.com/coupled2019/frontal/doc/EbookCoupled2019.pdf

Tarpø, M. G., Friis, T., Georgakis, C. T. & Brincker, R. (2020). The statistical errors in the estimated correlation function matrix for operational modal analysis. Journal of Sound and Vibration, 466, Article 115013. https://doi.org/10.1016/j.jsv.2019.115013

Tarpø, M. G., Silva Nabuco, B., Georgakis, C. T. & Brincker, R. (2020). Expansion of experimental mode shape from operational modal analysis and virtual sensing for fatigue analysis using the modal expansion method. International Journal of Fatigue, 130, Article 105280. https://doi.org/10.1016/j.ijfatigue.2019.105280

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). Evaluating the Effect of Modelling Errors in Load Identification Using Classical Identification Methods. Shock and Vibration, 2019, Article 9490760. https://doi.org/10.1155/2019/9490760

Oyegbile, O. B., Oyegbile, A. B. & Sørensen, K. K. (2019). Surface modification and stabilisation of kaolin part 1: effects of CTAC-PP fibre composites. Materials Research Innovations, 23(7), 427-439. https://doi.org/10.1080/14328917.2018.1515321

Demartino, C., Matteoni, G. & Georgakis, C. T. (2020). A quasi-steady 3-DoFs sectional aerodynamic model: preliminary results. In W. Lacarbonara, B. Balachandran, J. Ma, J. A. Tenreiro Machado & G. Stepan (Eds.), Nonlinear Dynamics of Structures, Systems and Devices - Proceedings of the 1st International Nonlinear Dynamics Conference, NODYCON 2019: Proceedings of the First International Nonlinear Dynamics Conference (NODYCON 2019) (Vol. I, pp. 399-407). Springer. https://doi.org/10.1007/978-3-030-34713-0_40

Kan, L., Zhang, L., Zhao, Y. & Wu, M. (2020). Properties of polyvinyl alcohol fiber reinforced fly ash based Engineered Geopolymer Composites with zeolite replacement. Construction and Building Materials, 231, Article 117161. https://doi.org/10.1016/j.conbuildmat.2019.117161

Di Paolo, M., Nuzzo, I., Caterino, N. & Georgakis, C. T. (2019). An innovative friction base restraint to reduce structural demand to wind turbines. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Vol. 2, pp. 3369-3379). National Technical University of Athens. https://2019.compdyn.org/

Kania, J. G. & Sørensen, K. K. (2019). A case study of soil-pile interaction in soft soils. Paper presented at 17th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE) , Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0280

Zhang, Z., Høeg, C. E. & Andersen, L. V. (2019). The influence of uncertain soil conditions on the dynamic response of offshore wind turbines using an efficient time-domain model. In A. Zingoni (Ed.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (pp. 257-258). CRC Press. https://doi.org/10.1201/9780429426506

Persson, P., Frier, C., Pedersen, L., Andersen, L. V. & Manuel, L. (2019). Influence of uncertain parameters on modal properties of wood floors. In A. Zingoni (Ed.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (pp. 45-46). CRC Press. https://doi.org/10.1201/9780429426506

Uk Lim, H., Manuel, L., Persson, P. & Andersen, L. V. (2019). A surrogate model to describe uncertainties in wood floor modal frequencies. In A. Zingoni (Ed.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (pp. 121-126). CRC Press. https://doi.org/10.1201/9780429426506

Bucinskas, P. & Andersen, L. V. (2019). Dynamic structure response using surrogate models. In A. Zingoni (Ed.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (pp. 109-114). CRC Press. https://doi.org/10.1201/9780429426506

Andersen, L. V., Bucinskas, P., Nguyen, P., Manuel, L. & Persson, P. (2019). A surrogate model for vibration transmission in layered soil. In A. Zingoni (Ed.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (pp. 31-36). CRC Press. https://doi.org/10.1201/9780429426506

Knudsen, J., Sørensen, K. K., Steenfelt, J. S. & Trankjær , H. (2019). Design of bored piles in Denmark - a historical perspective. Paper presented at XVII European Conference on Soil Mechanics and Geotechnical Engineering, Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0732

Matejícka, L., Georgakis, C. T., Koss, H. & Egger, P. (2019). Preliminary comparison of the aerodynamics of several concave-filleted bridge cable surfaces. Paper presented at The 15th International Conference on Wind Engineering, Beijing, China.

Matejícka, L., Georgakis, C. T., Schwarz, A. & Egger, P. (2019). Cable Surface for the Reduction of Risk Associated with Bridge Cable Ice Accretions. Structural Engineering International, 29(3), 425-432. https://doi.org/10.1080/10168664.2019.1597453

Kan, L., Lv, J., Duan, B. & Wu, M. (2019). Self-healing of Engineered Geopolymer Composites prepared by fly ash and metakaolin. Cement and Concrete Research, 125, Article 105895. https://doi.org/10.1016/j.cemconres.2019.105895

Wu, M. & Wang, T. (2019). Addressing microbiologically induced corrosion of concrete sewers: selection of materials and design strategies. Abstract from International Conference on Innovative Materials for Sustainable Civil Engineering, Nanjing, China. https://www.researchgate.net/publication/362570114_A_probabilistic_model_framework_for_microbiologically_induced_corrosion_of_concrete_sewers

Lees, A. S. & Clausen, J. C. S. (2019). A new approach to characterise the benefit of multi-axial geogrid on soil. In The XVII European Conference on Soil Mechanics and Geotechnical Engineering https://doi.org/10.32075/17ECSMGE-2019-0409

Sørensen, E. S., Clausen, J. & Damkilde, L. (2013). Numerical Implementation of the Hoek-Brown Material Model with Strain Hardening. CRC Press. https://www.taylorfrancis.com/chapters/edit/10.1201/b15963-73/numerical-implementation-hoek-brown-material-model-strain-hardening-s%C3%B8rensen-clausen-damkilde

Knudsen, B. S., Østergaard, M. U. & Clausen, J. (2013). Implementation of a Stress-dependent Strength Material Model in PLAXIS 3D. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Implementation-of-a-Stress-dependent-Strength-Model-Knudsen-%C3%98stergaard/e9e855ea2dbfa781db5e23761e345d99cebf7bda

Clausen, J. C. (Ed.) (2016). Third Semester and Master’s Thesis Ideas 2016: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Koteras, A. K., Ibsen, L. B., Clausen, J. C., Chung, J. S. (Ed.) & Wang, H. H. (Ed.) (2016). Seepage Study for Suction Installation of Bucket Foundation in Different Soil Combinations. International Society of Offshore & Polar Engineers. http://www.isope.org/publications/publications.htm

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (2010). 1g Model Tests with Foundations in Sand. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Clausen, J. C. (2016). Discussion on ‘‘Bearing capacity of circular footings over rock mass by using axisymmetric quasi lower bound finite element limit analysis” by Manash Chakraborty and Jyant Kumar [Comput. Geotech. 70 (2015) 138–149]. Computers and Geotechnics, 73, 231-234. https://doi.org/10.1016/j.compgeo.2015.12.002

Sørensen, E. S., Clausen, J. C., Merifield, R. S. & Damkilde, L. (2015). Implementation of the Modified Hoek-Brown Model into the Finite Element Method. Institute of Cybernetics at Tallinn University of Technology. http://www.ioc.ee/nscm28/files/Proceedings_of_NSCM28.pdf

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2015). Finite element implementation of the Hoek-Brown material model with general strain softening behavior. International Journal of Rock Mechanics and Mining Sciences, 78, 163-174. https://doi.org/10.1016/j.ijrmms.2015.05.005

Gnaur, D. & Clausen, J. (2015). Teaching Smart with Podcasts. International Journal of Engineering Education, 31(2), 486-494.

Displaying results 301 to 350 out of 825

Back to the main page

Revised 13.11.2025

AU Engineering