Find

For students
For PhDs
For employees

Department of Civil and Architectural Engineering

Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Paolacci, F., Di Sarno, L., De Risi, R., Abbiati, G., Zeki Mohamad, A. M., Malena, M. & Corritore, D. (2015). Refined and simplified numerical models of an isolated old highway bridge for PsD testing. In Experimental Research in Earthquake Engineering: EU-SERIES Concluding Workshop (pp. 173-198). Springer. https://doi.org/10.1007/978-3-319-10136-1_13

Shanin Reza, M., Abbiati, G., Bonelli, A. & S. Bursi, O. (2015). Hybrid simulations of a piping system based on model reduction techniques. In F. Taucer & R. Apostolska (Eds.), Experimental Research in Earthquake Engineering: EU-SERIES Concluding Workshop (pp. 117-132). Springer. https://doi.org/10.1007/978-3-319-10136-1_9

Abbiati, G., S. Bursi, O., Cazzador, E., Ceravolo, R., Mei, Z., Paolacci, F. & Pegon, P. (2015). Pseudo-dynamic testing based on non-linear dynamic substructuring of a reinforced concrete bridge. In F. Taucer & R. Apostolska (Eds.), Experimental Research in Earthquake Engineering: EU-SERIES Concluding Workshop (pp. 83-98). Springer. https://doi.org/10.1007/978-3-319-10136-1_7

Barbero, N., Abbiati, G., Enrico, E., Amato, G., Ott, H. R., Mesot, J. & Shiroka, T. (2019). Design Optimization through Thermomechanical Finite-Element Analysis of a Hybrid Piston-Clamped Anvil Cell for Nuclear Magnetic Resonance Experiments. Review of Scientific Instruments, 90(1), Article 013901. https://doi.org/10.1063/1.5059391

Abbiati, G., Cazzador, E., Alessandri, S., S. Bursi, O., Paolacci, F. & De Santis, S. (2018). Experimental characterization and component-based modeling of deck-to-pier connections for composite bridges. Journal of Constructional Steel Research, 150, 31-50. https://doi.org/10.1016/j.jcsr.2018.08.005

Abbiati, G., La Salandra, V., S. Bursi, O. & Caracoglia, L. (2018). A Composite Experimental Dynamic Substructuring Method Based on Partitioned Algorithms and Localized Lagrange Multipliers. Mechanical Systems and Signal Processing, 100, 85-112. https://doi.org/10.1016/j.ymssp.2017.07.020

Yildirim, H. C. & Marquis, G. B. (2013). A round robin study of high frequency mechanical impact treated welded joints subjected to variable amplitude loading. Welding in the World, 57(3), 437-447. https://doi.org/10.1007/s40194-013-0045-3

Yildirim, H. C., Marquis, G. B. & Barsoum, Z. (2013). Fatigue assessment of high frequency mechanical impact (HFMI)-improved fillet welds by local approaches. International Journal of Fatigue, 52, 57-67. https://doi.org/10.1016/j.ijfatigue.2013.02.014

Marquis, G. B., Mikkola, E., Yildirim, H. C. & Barsoum, Z. (2013). Fatigue strength improvement of steel structures by high-frequency mechanical impact: proposed fatigue assessment guidelines. Welding in the World, 57(6), 803-822. https://doi.org/10.1007/s40194-013-0075-x

Yildirim, H. C. & Marquis, G. B. (2013). Notch stress analyses of high-frequency mechanical impact-improved welds by using ρf= 1 mm and ρf= ρ + 1 mm approaches. Fatigue & Fracture of Engineering Materials and Structures, 37(5), 561-569. https://doi.org/10.1111/ffe.12139

Yildirim, H. C. (2014). Fatigue strength assessment of HFMI-treated butt welds by the effective notch stress method. Welding in the World, 58(3), 279-288. https://doi.org/10.1007/s40194-014-0113-3

Yildirim, H. C. & Marquis, G. B. (2014). Fatigue design of axially-loaded high frequency mechanical impact treated welds by the effective notch stress method. Materials & Design, 58, 543-550. https://doi.org/10.1016/j.matdes.2014.02.001

Marquis, G. B. & Yildirim, H. C. (2015). Fatigue improvement of welded steel joints by high frequency mechanical impact treatment. Materials Science & Engineering Technology, 46(2), 136-144. https://doi.org/10.1002/mawe.201400368

Yildirim, H. C. (2015). Review of fatigue data for welds improved by tungsten inert gas dressing. International Journal of Fatigue, 79, 36-45. http://10.1016/j.ijfatigue.2015.04.017

Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z. (2015). Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment. Engineering Structures, 106, 422-435. https://doi.org/10.1016/j.engstruct.2015.10.044

Yildirim, H. C., Marquis, G. & Sonsino, C. M. (2015). Lightweight design with welded high-frequency mechanical impact (HFMI) treated high-strength steel joints from S700 under constant and variable amplitude loadings. International Journal of Fatigue, 91(Part 2), 466-474. https://doi.org/10.1016/j.ijfatigue.2015.11.009

Yildirim, H. C. (2017). Recent results on fatigue strength improvement of high-strength steel welded joints. International Journal of Fatigue, 101(Part 2), 408-420. https://doi.org/10.1016/j.ijfatigue.2016.10.026

Shams-Hakimi, P., Yildirim, H. C. & Al-Emrani, M. (2017). The thickness effect of welded details improved by High-Frequency mechanical impact treatment. International Journal of Fatigue, 99(1), 111-124. https://doi.org/10.1016/j.ijfatigue.2017.02.023

S. Bursi, O., Abbiati, G., Cazzador, E., Pegon, P. & J. Molina, F. (2017). Nonlinear heterogeneous dynamic substructuring and partitioned FETI time integration for the development of low-discrepancy simulation models. International Journal for Numerical Methods in Engineering, 112(9), 1253-1291. https://doi.org/10.1002/nme.5556

Abbiati, G. & Stojadinovic, B. (2017). A procedure for the approximated response history analysis of linear thermoelastic structures. Journal of Thermal Stresses, 40(7), 879-898. https://doi.org/10.1080/01495739.2017.1283972

Abbiati, G., S. Bursi, O., Caperan, P., Di Sarno, L., Molina Ruiz, F. J., Paolacci, F. & Pegon, P. (2015). Hybrid Simulation of a Multi-Span RC Viaduct with Plain Bars and Sliding Bearings. Earthquake Engineering and Structural Dynamics, 44(13), 2221-2240. https://doi.org/10.1002/eqe.2580

Abbiati, G., Ceravolo, R. & Surace, C. (2015). Time-dependent Estimators for On-Line Monitoring of Full-Scale Structures under Ambient Excitation. Mechanical Systems and Signal Processing, 60-61, 166-181. https://doi.org/10.1016/j.ymssp.2014.10.018

S. Bursi, O., S. Reza, M., Abbiati, G. & Paolacci, F. (2014). Performance-based Earthquake Evaluation of a Full-Scale Petrochemical Piping System. Journal of Loss Prevention in the Process Industries, 33, 10-22. https://doi.org/10.1016/j.jlp.2014.11.004

S. Bursi, O., Abbiati, G. & S. Reza, M. (2014). A novel hybrid testing approach for piping systems of industrial plants. Smart Structures and Systems, 14(6), 1005-1030. https://doi.org/10.12989/sss.2014.14.6.1005

S. Bursi, O., Kumar, A., Abbiati, G. & Ceravolo, R. (2014). Identification, Model Updating, and Validation of a Steel Twin Deck Curved Cable-Stayed Footbridge. Computer-Aided Civil and Infrastructure Engineering, 29(9), 703-722. https://doi.org/10.1111/mice.12076

Ceravolo, R., Pistone, G., Zanotti Fragonara, L., Massetto, S. & Abbiati, G. (2014). Vibration-based Monitoring and Diagnosis of Cultural Heritage: a Methodological Discussion in Three Examples. International Journal of Architectural Heritage, 10(4), 375-395. https://doi.org/10.1080/15583058.2013.850554

Ceravolo, R. & Abbiati, G. (2013). Time Domain Identification of Structures: a Comparative Analysis of Output-Only Methods. Journal of Engineering Mechanics, 139(4), 537-544. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000503

Ceravolo, R., Tondini, N., Abbiati, G. & Kumar, A. (2011). Dynamic Characterization of Complex Bridge Structures with Passive Control Systems. Structural Control and Health Monitoring, 19(4), 511-534. https://doi.org/10.1002/stc.450

Chiorino, M. A., Ceravolo, R., Spadafor, A., Zanotti Fragonara, L. & Abbiati, G. (2011). Dynamic Characterization of Complex Masonry Structures: The Sanctuary of Vicoforte. International Journal of Architectural Heritage, 5(3), 296-314. https://doi.org/10.1080/15583050903582516

Sørensen, K. K. & Rezei, M. (2019). Influence of structure on the compression behaviour of two very stiff fissured high plasticity Eocene clays. In 7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019 (Vol. 92). Article 05003 EDP Sciences. https://doi.org/10.1051/e3sconf/20199205003

Lodahl, M. R. & Sørensen, K. K. (2019). Effects of pore water chemistry on the unloading-reloading behaviour of reconstituted clays. In 17th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2019 - Proceedings International Society for Soil Mechanics and Geotechnical Engineering. https://doi.org/10.32075/17ECSMGE-2019-0143

D. Pedersen, B., Hoerlykke, T. & Sørensen, K. K. (2019). Influence of pre-augering on ground surface displacements around driven piles in clay. Paper presented at 17th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE) , Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0416

Burlina, C., Georgakis, C. T., Larsen, S. V. & Egger, P. (2018). Aerodynamics and rain rivulet suppression of bridge cables with concave fillets. Wind and Structures, An International Journal, 26(4), 253-266. https://doi.org/10.12989/was.2018.26.4.253

Camargo, E. A., Ulfkjaer, J. P., Brincker, R., Nøergaard, J. & Gadegaard, S. S. (2019). Operational Modal Analysis and Finite-Element Model Updating of Pilot Concrete Wind Turbine Tower. Journal of Structural Engineering (United States), 145(2), Article 05018003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002242

Bucinskas, P. & Andersen, L. V. (2018). Effects of railway track modelling to surrounding soil and structure excitation. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling (Vol. 7, pp. 4148-4155). The International Institute of Acoustics and Vibration (IIAV).

Rajasingam, A., Kirkegaard, P. H. & Andersen, L. V. (2018). Bending – Active Structures Modelling, Behavior and Stiffness Analysis. In C. Mueller & S. Adriaenssens (Eds.), Proceedings of the IASS Symposium 2018: Creativity in Structural Design The International Association for Shell and Spacial Structures. https://www.ingentaconnect.com/content/iass/piass/2018/00002018/00000015/art00009

F. Ø. Jensen, S., Andersen, L. V., R. Pedersen, R. & Bjerre Nielsen, M. (2018). Multi-Level Design of Tubular Joints. In ASME 2018 1st International Offshore Wind Technical Conference, IOWTC 2018: Proceedings Article IOWTC2018-1015, V001T01A041 American Society of Mechanical Engineers. https://doi.org/10.1115/IOWTC2018-1015

Wu, M., Yermakou, V., Johannesson, B., Chen, J., Geiker, M. R. & McDonald, P. (2013). Cryoporometry characterization for cement based materials. Paper presented at Water Transport in Cementitious Materials, Guildford, United Kingdom.

Wu, M., Johannesson, B. & Geiker, M. R. (2011). A review: self-healing in cementitious materials and engineered cementitious composite as a self-healing material. Construction and Building Materials, 28(1), 571-583. https://doi.org/10.1016/j.conbuildmat.2011.08.086

Wu, M., Johannesson, B. & Geiker, M. R. (2014). Application of water vapor sorption measurement for porosity characterization of hardened cement pastes. Construction and Building Materials, 66, 621-633. https://doi.org/10.1016/j.conbuildmat.2014.06.004

Wu, M., Johannesson, B. & Geiker, M. R. (2014). A preliminary study of the influence of ions in the pore solution of hardened cement pastes on the porosity determination by low temperature calorimetry. Thermochimica Acta, 589, 215-225. https://doi.org/10.1016/j.tca.2014.05.027

Wu, M. & Johannesson, B. (2014). Impact of sample saturation on the detected porosity of hardened concrete using low temperature calorimetry. Thermochimica Acta, 580, 66-78. https://doi.org/10.1016/j.tca.2014.02.002

Wu, M., Johannesson, B. & Geiker, M. R. (2014). Determination of ice content in hardened concrete by low temperature calorimetry: influence of baseline calculation and heat of fusion of confined water. Journal of Thermal Analysis and Calorimetry, 115(2). https://doi.org/10.1007/s10973-013-3520-6

Wu, M., Johannesson, B. & Geiker, M. R. (2013). A study of the water vapor sorption isotherms of hardened cement pastes: Possible pore structure changes at low relative humidity and the impact of temperature on isotherms. Cement and Concrete Research, 56, 97-105. https://doi.org/10.1016/j.cemconres.2013.11.008

Wu, M., Fridh, K., Johannesson, B. & Geiker, M. R. (2015). Influence of frost damage and curing in studying the porosity of cement based materials by low temperature calorimetry. Thermochimica Acta, 607. https://doi.org/10.1016/j.tca.2015.03.005

Wu, M., Fridh, K., Johannesson, B. & Geiker, M. R. (2018). Impact of sample crushing on the porosity characterization of hardened cement pastes by low temperature calorimetry. Thermochimica Acta, 665, 11-19. https://doi.org/10.1016/j.tca.2018.05.002

Simonsen, T. R. & Sørensen, K. K. (2018). Performance Of Vibrating Wire Piezometers In Very Low Permeable Clay. Paper presented at 10th International Symposium On Field Measurements In Geomechanics, Rio de Janeiro, Brazil. https://www.issmge.org/uploads/publications/80/81/S35-Simonsen.pdf

Kania, J. G. & Sørensen, K. K. (2018). A Static Pile Load Test on a Bored Pile Instrumented with Distributed Fibre Optic Sensors. Paper presented at 10th International Symposium On Field Measurements In Geomechanics, Rio de Janeiro, Brazil. https://www.issmge.org/uploads/publications/80/81/S34-Kania.pdf

Meyer, K. E., Burlina, C. & Georgakis, C. T. (2018). POD analysis of flow structures behind cylinders with concave fillets. In Proceedings of the 19th International Symposium on Application of Laser and Imaging Techniques to Fluid Mechanics (pp. 100-111). Center for Innovation, Technology and Policy Research IN+. http://bit.ly/2018LISBON_Symposium_Proceedings

Persson, P. & Andersen, L. V. (2018). Efficient finite-element analysis of the influence of structural modifications on traffic-induced building vibrations. In A. S. Cardoso, J. L. Borges, P. A. Costa, A. T. Gomes, J. C. Marques & C. S. Vieira (Eds.), Numerical Methods in Geotechnical Engineering IX: Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2018) (Vol. 2, pp. 1557-1564). CRC Press.

Displaying results 451 to 500 out of 825

10

Back to the main page

Revised 13.11.2025

-

AU Engineering