Aarhus University Seal

Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Hernandez-Guardado, A., Petrella, F. & Franza, A. (2025). Ground movements induced by a deep excavation in Copenhagen: Comparison of prediction methods with monitoring data. In Tunnelling into a Sustainable Future – Methods and Technologies: Proceedings of the ITA-AITES World Tunnel Congress 2025 (WTC 2025), 9-15 May 2025, Stockholm, Sweden (pp. 1460) https://doi.org/10.1201/9781003559047-188
Li, Z., Bai, Y. & Luo, Q. (2025). Influence of humidity conditions on the performance of CO2-cured LC3. Case Studies in Construction Materials, 22, Article e04747. https://doi.org/10.1016/j.cscm.2025.e04747
Shi, X. & Wu, M. (2025). Cement degradation in CO2-saturated water and the impact of liquid to solid ratio: an experimental and thermodynamic modelling study. Paper presented at 12th International Conference on Fracture Mechanics for Concrete and Concrete Structures, Veinna. https://doi.org/10.21012/FC12.1289
Pizarro, D., Kovarbašić, M., Abbiati, G. & Stojadinović, B. (2025). Multi-Axial Subassemblage Testing System for Hybrid Simulation With Large-Scale Structural Components. Earthquake Engineering and Structural Dynamics, 54(8), 2084-2105. https://doi.org/10.1002/eqe.4351
Ulfkjaer, J. P., Brosbøl, D. P., Larsen, R. & Clausen, J. (2025). Test and Analysis of Prestressed Ultra High Performance Concrete Beams. In RILEM Bookseries (pp. 184-193). Springer Science and Business Media B.V.. https://doi.org/10.1007/978-3-031-70281-5_21
Modé, P., Demartino, C., Georgakis, C. T. & Lagaros, N. D. (2025). Short-term extreme wind speed forecasting using dual-output LSTM-based regression and classification model. Journal of Wind Engineering and Industrial Aerodynamics, 259, Article 106035. https://doi.org/10.1016/j.jweia.2025.106035
Zhang, F., Pang, K., Li, J., Xu, W., Du, J., Wang, J., Zhang, J., Liu, Q. & Xiao, H. (2025). Effect of micro-cellulose fiber on the mechanical, shrinkage properties and ballistic impact resistance of high-performance cement composites. Construction and Building Materials, 463, Article 139963. https://doi.org/10.1016/j.conbuildmat.2025.139963
Oakes, B., Gomes, C., Abbiati, G., Kamburjan, E., Bas, E. E. & Engelsgaard, S. (2024). Towards Ontological Service-Driven Engineering of Digital Twins. In Proceedings: MODELS 2024 - ACM/IEEE 27th International Conference on Model Driven Engineering Languages and Systems: Companion Proceedings (pp. 464-469). Association for Computing Machinery. https://doi.org/10.1145/3652620.3688261
Malund Dammark Jensen, A., Lund Thing, M., Gres, S. & Abbiati, G. (2024). Input-state estimation for multi-body dynamic systems with Bayesian filters. In W. Desmet, B. Pluymers, D. Moens & J. del Fresno Zarza (Eds.), Proceedings of ISMA 2024 - International Conference on Noise and Vibration Engineering and USD 2024 - International Conference on Uncertainty in Structural Dynamics (pp. 1908-1922). KU Leuven, Departement Werktuigkunde.
Jensen, A. M. D., Schoerghofer-Queiroz, A., Ulriksen, M. D., Tcherniak, D., Damkilde, L., Talasila, P., Larsen, P. G. & Abbiati, G. (2024). Digital twin as a service for damage prognosis of offshore wind turbine foundations. In W. Desmet, B. Pluymers, D. Moens & J. del Fresno Zarza (Eds.), Proceedings of ISMA 2024 - International Conference on Noise and Vibration Engineering and USD 2024 - International Conference on Uncertainty in Structural Dynamics (pp. 4127-4141). KU Leuven, Departement Werktuigkunde.
Khan, J., Thygesen, J., Wei, R., Wu, M., Nielsen, R. P. & Simonsen, M. E. (2024). An innovative approach utilizing reinforced scale and cement as a combined barrier material for well abandonment. Poster session presented at Danish Offshore Technology Conference 2024, Copenhagen, Denmark.
Holdt-Olesen, D. F., Holdt-Olesen, N. F., O. Jensen, C., Sørensen, K. K. & R. Lodahl, M. (2024). Strength Development And Shearing Behavior Of Cement Stabilized Gyttja. Paper presented at 19th Nordic Geotechnical Meeting, Gothenburg, Sweden.
Kania, J. G., de Sousa, L. L. C. G., Hededal, O. & Sørensen, K. K. (2024). Numerical modelling of soil-pile interaction in a subsiding soil. In N. Guerra, M. Matos Fernandes, C. Ferreira, A. Gomes Correia, A. Pinto & P. Sêco Pinto (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (1. ed.). CRC Press. https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003431749-86/numerical-modelling-soil-pile-interaction-subsiding-soil-kania-de-sousa-hededal-s%C3%B8rensen?context=ubx&refId=a3c3c516-f318-42d4-bb78-e4b03befcf8d
Krabbe, J. Z., Sørensen, K. K. & Lodahl, M. R. (2024). Effects of physical characteristics on the shear behaviour of Foulum glaciofluvial sand. In N. Guerra, M. Matos Fernandes, C. Ferreira, A. Gomes Correia, A. Pinto & P. Sêco Pinto (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (1 ed.). CRC Press. https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003431749-90/effects-physical-characteristics-shear-behaviour-foulum-glaciofluvial-sand-krabbe-s%C3%B8rensen-lodahl
Kabel, T., Kristoffersen, J. C., Desai, N. & Georgakis, C. T. (2024). Comparison of Three Wave Sensors through a Full-Scale Experimental Campaign. In Proceedings of the Fourty-third (2024) International Ocean and Polar Engineering Conference: ISOPE2024 (pp. 2552-2558). Article ISOPE-I-24-362. https://onepetro.org/ISOPEIOPEC/proceedings/ISOPE24/All-ISOPE24/ISOPE-I-24-362/546751
Kristoffersen, J. C., Kabel, T., Georgakis, C. T. & Desai, N. (2024). Performance Study of Cost-Effective LiDAR Instrument Measuring Surface Waves in a Laboratory. In Proceedings of the 34th International Ocean and Polar Engineering Conference, 2024 (pp. 2213-2219)
Georgakis, C. T., Lagaros, N., Tsakalis, P., Chamatidis, I. & Demartino, C. (2024). Enhancing Bridge Safety with Hyperlocal, ML-Powered Wind Forecasting and Early Warning Systems. Paper presented at The 12th International Cable Supported Bridge Operators Conference, New York, New York, United States.
Cai, D., Demartino, C. & Georgakis, C. T. (2024). Towards an ice-shedding cable bridge early warning system based on non-contact techniques. Abstract from The 12th International Cable Supported Bridge Operators Conference, New York, New York, United States.
Georgakis, C. T., Lagaros, N., Tsakalis, P., Chamatidis, I. & Demartino, C. (2024). A short-term hyperlocal meteorological forecast tool for mitigating bridge risks. In J. Sandager Jensen, D. M. Frangopol & J. Wittrup Schmidt (Eds.), Bridge Maintenance, Safety, Management, Digitalization and Sustainability - Proceedings of the 12th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2024 (pp. 2710-2717). CRC Press. https://doi.org/10.1201/9781003483755-322
Yu, Y., Franza, A., Ghiassi, B., Neves, L. C. & M. Marshall, A. (2025). Tunnelling-induced wall damage: an appraisal of elastoplastic constitutive models for masonry. Tunnelling and Underground Space Technology, 156, Article 106240. https://doi.org/10.1016/j.tust.2024.106240
Stamenov, D., Abbiati, G. & Sauder, T. (2024). Data-driven modeling of low-frequency hydrodynamic loads. Journal of Physics: Conference Series, 2875(1), Article 012043. https://doi.org/10.1088/1742-6596/2875/1/012043
Wang, T. & Wu, M. (2024). Recent research progress on abrasion damage of concrete for hydraulic structures. Abstract from International Conference on Innovation in Civil, Structural and Environmental Engineering, Rome, Italy.
Abbiati, G., Gomes, C., Sandberg, M., Kazemi, Z., Hansen, S. T. & Larsen, P. G. (2024). Modelling for Digital Twins. In J. Fitzgerald, C. Gomes & P. G. Larsen (Eds.), The Engineering of Digital Twins (pp. 89-127). Springer. https://doi.org/10.1007/978-3-031-66719-0_5
Li, J., Hudert, M. M. & Andersen, L. V. (2024). A study of internal stiffeners in wooden slab panels obtained by topology optimisation. In Proceedings of the IASS 2024 Symposium: Redefining the Art of Structural Design International Association for Shell and Spatial Structures (IASS).
Yildirim, H. C. & K. Liaw, P. (2024). Data-driven conditional probability to predict fatigue properties of multi-principal element alloys (MPEAs). Computer Methods in Applied Mechanics and Engineering, 432(Part A), Article 117358. https://doi.org/10.1016/j.cma.2024.117358
A.E. , D., Franza, A. & Sørensen, K. K. (2024). A t-z approach for the design of axially loaded piles in consolidating soil. In Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society: Proceedings of the XVIII ECSMGE 2024 (pp. 448-451). CRC Press. https://doi.org/10.1201/9781003431749-60
Lev Yehudi, O., Franza, A., von Solms, N. & Klar, A. (2024). A novel mechanical energy storage solution using underground CO2 hydrate capsules. In Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society: Proceedings of the XVIII European Conference on Soil Mechanics and Geotechnical Engineering (pp. 3094-3099). CRC Press. https://doi.org/10.1201/9781003431749-607
Tang, C., M. Marshall, A., Heron, C. M., Franza, A. & Xu, J. (2024). Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge. In N. Guerra, M. M. Fernandes, C. Ferreira, A. G. Correia, A. Pinto & P. S. Pinto (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (pp. 2667-2670). CRC Press. https://doi.org/10.1201/9781003431749-518
Gres, S., Anastasopoulos, D., Hansen, J. F., Abbiati, G. & Reynders, E. P. B. (2022). Statistical sensitivity-based damage localization with optical strain-based features. In W. Desmet, B. Pluymers, D. Moens & S. Neeckx (Eds.), Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics (pp. 2816-2825). KU Leuven, Departement Werktuigkunde.
Krabbenhoft, S. & Damkilde, L. (2024). Design of Rectangular Footings in Cohesionless Soil Subjected to Torsion. International Journal of Geomechanics, 24(9), Article 04024198. https://doi.org/10.1061/IJGNAI.GMENG-9826
Franza, A. (2024). General Report – sustainability and resilience of underground infrastructure. In Geotechnical Aspects of Underground Construction in Soft Ground (pp. 436-444) https://doi.org/10.1201/9781003413790-52