Publications

Under publication list you can find a complete list of the publications that are written by employees at the Publications at Department of Civil and Architectural Engineering for example journal articles, books, reports etc.

The department also publishes technical reports which you can read more about under Technical reports.

Under PhD dissertations you will find the department's published PhD dissertations.

Publication list

Sort by: Date | Author | Title

Johansen, K. W., Pimentel de Figueiredo, R., Golovina, O. & Teizer, J. (2021). Autonomous Safety Barrier Inspection in Construction: An Approach Using Unmanned Aerial Vehicles and SafeBIM. In C. Feng, T. Linner & I. Brilakis (Eds.), Proceedings of the 38th ISARC (pp. 629-636) https://doi.org/10.22260/ISARC2021/0085

Abbiati, G. & Sauder, T. (2021). Bayesian experimental design of cyber-physical tests for hydrodynamic model calibration. In Ocean Engineering [V006t06a032] American Society of Mechanical Engineers. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 6 https://doi.org/10.1115/OMAE2021-60490

Chen, G. (2021). CFD Modeling of Urban Wind Flow and Thermal Conditions - Steady and Unsteady Analysis with Solar-Induced Non-Uniform Thermal Boundary Conditions. Aarhus Universitet.

Hagsten, L. G. & Fisker, J. (2021). Capacity assessment of the Örnsköldsvik Bridge on the basis of plastic analysis. Bygningsstatiske Meddelelser, 91(1), 11-19. https://www.dsby.dk/media/dsbypdf/2021/BSM%2088%20-%20May%202021.pdf

Purup, P. B. & Petersen, S. (2021). Characteristic traits of visualizations for decision-making in the early stages of building design. Journal of Building Performance Simulation, 14(4), 403-419. https://doi.org/10.1080/19401493.2021.1961864

Kragh, M. K. & Jakica, N. (2021). Circular economy in facades. In E. Gasparri, A. Brambilla, G. Lobaccaro, F. Goia, A. Andaloro & A. Sangiorgio (Eds.), Rethinking Building Skins: Transformative Technologies and Research Trajectories (pp. 519-539). Woodhead Publishing. http://10.1016/B978-0-12-822477-9.00016-4

Neve, H. H., Lerche, J. & Wandahl, S. (2021). Combining Lean Methods to Improve Construction Labour Efficiency in Renovation Projects. In L. F. Alarcón & V. A. González (Eds.), Lean Construction in Crisis Times: Responding to the Post-Pandemic AEC Industry Challenges (pp. 647–656). Pontificia Universidad Católica del Perú. https://doi.org/10.24928/2021/0107

Obro, L. F., Heiselberg, K., Krogh, P. G., Handberg, C., Ammentorp, J., Pihl, G. T. & Osther, P. J. S. (2021). Combining mHealth and health-coaching for improving self-management in chronic care: A scoping review. Patient Education and Counseling, 104(4), 680-688. https://doi.org/10.1016/j.pec.2020.10.026

Sørensen, K. K. (2021). Conceptual physical modelling of a subsurface geomembrane energy storage system. Paper presented at 20th International Conference on Soil Mechanics and Geotechnical Engineering, Sydney, Australia.

Hudert, M. M. (2021). Connecting lines: Investigating the potential of ruled surface structures for circular construction. In C. Fivet, P. DÁcunto, M. Fernandez Ruiz & P. O. Ohlbrock (Eds.), The proceedings of the International fib Symposium on Conceptual Design of Structures 2021 (pp. 469-476) https://doi.org/10.35789/fib.PROC.0055.2021.CDSymp.P057

Clausen, J. C. S. (2021). Consistent evaluation of slope safety factors between different strength criteria. In R. Hammah, T. Yacoub, A. McQuillan & J. Curran (Eds.), The Evolution of Geotech: 25 Years of Innovation (pp. 429-435). CRC Press. https://www.rocscience.com/assets/resources/products/Rocscience-International-Conference-2021-Proceedings.pdf

Faurholt Obro, L., Heiselberg, K., Gall Krogh, P., Handberg, C., Ammentorp, J., Thybo Pihl, G. & Jörn Sloth Osther, P. (2021). Corrigendum to "Combining mHealth and health-coaching for improving self-management in chronic care. A scoping review" [Patient Educ Couns, 104, 4 (April 2021) 680-688]. Patient Education and Counseling, 104(10), 2601-2601. https://doi.org/10.1016/j.pec.2021.06.035

Pakanen, M. A., Heiselberg, K., Nachtigall, T. R., Broe, M. & Krogh, P. G. (2021). Crafting a Leather Self-tracking Device for Pollen Allergies. In R. Wimmer (Ed.), Proceedings of the Fifteenth International Conference on Tangible, Embedded, and Embodied Interaction: TEI '21 (pp. 1-15). [96] Association for Computing Machinery. https://doi.org/10.1145/3430524.3446072

Sousa Santos, R., Pimenta do Vale, C., Bogoni, B. & Kirkegaard, P. H. (2021). DIDACTICS AND CIRCUMSTANCE: EXTERNAL REPRESENTATIONS IN ARCHITECTURAL DESIGN TEACHING. In Z. Adil, E. An & A. Marey (Eds.), Online Education: Teaching In a Time of Change (pp. 104-112). Architecture media politics society (AMPS). AMPS Proceedings Series Vol. 23 No. 2 https://www.researchgate.net/publication/356443091_Didactics_and_circumstance_External_representations_in_architectural_design_teaching

Nordstrøm Rasmussen, C., Pakanen, M. A. & Petersen, M. G. (2021). Designing Socially Acceptable Light Therapy Glasses for Self-managing Seasonal Affective Disorder. In J. Häkkilä, P. Lopes, T. Kosch, J. Nishida, P. Strohmeier & Y. Abdelrahman (Eds.), Augmented Humans Conference 2021 (pp. 307-312). Association for Computing Machinery. https://doi.org/10.1145/3458709.3458995

Stutz, H. H. & Martinez, A. (2021). Directionally dependent strength and dilatancy behavior of soil–structure interfaces. Acta Geotechnica, 16(9), 2805-2820. https://doi.org/10.1007/s11440-021-01199-5

Kristensen, M. H. & Petersen, S. (2021). District heating energy efficiency of Danish building typologies. Energy and Buildings, 231, [110602]. https://doi.org/10.1016/j.enbuild.2020.110602

Schultz, C. P. L. & Kamari, A. (2021). Diversity in Renovation Design: Theoretical Foundations of the Renovation Domain Model. Journal of Computing in Civil Engineering, 35(4). https://doi.org/10.1061/(ASCE)CP.1943-5487.0000969

Gall Krogh, P. & Koskinen, I. (2021). Drifing by Intention - Four Epistemic traditions in Constructive Design Research. In Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems, CHI EA 2021 [146] Association for Computing Machinery. ACM CHI Conference on Human Factors in Computing Systems https://doi.org/10.1145/3411763.3445000

Gribsholt-Beck, T., Bue, J., Grud, P., Furbo Rasmussen, K., Rasmussen, M., Tovsig Andersen, A., Bondo Hoff, M., Christensen, L., Sørensen, K. K., Rahbek Udengaard, J. & Møllerd, O. (2021, Jun). Dynamisk prøvebelastning af pæle: PDA-målinger, CASE- og CAPWAP analyser. (1 ed.) Dansk Geoteknisk Forening. DGF vejledning No. 1 https://danskgeotekniskforening.dk/sites/default/files/pdf/Vejledninger/DGF-vejledning%201%20-%20Dynamisk%20pr%C3%B8vebelastning%20af%20p%C3%A6le%2C%20juni%202021ny.pdf

Beatini, V. & Tasora, A. (2021). Early experimentations within the masonry barrel vault. In S. A. Behnejad, G. A. R. Parke & O. A. Samavati (Eds.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).

Altomonte, S., Amorim, C. N. D., Ciampi, G., Garcia-Hansen, V., Gentile, N., Gkaintatzi-Masouti, M., Osterhaus, W., Obradovic, B., Pham, K., Scorpio, M. & Sibilio, S. (2021). Energy Saving potential of user-centered integrated lighting solutions: A literature review: Research Report from Subtask D of IEA SHC Task 61 / EBC Annex 77 Integrated Solutions for Daylighting and Electric Lighting: From Component to User-Centered System Efficiency. https://doi.org/10.18777/ieashc-task61-2021-0013

Peplow, A., Persson, P. & Andersen, L. V. (2021). Evaluating annoyance mitigation in the screening of train-induced noise and ground vibrations using a single-leaf traffic barrier. Science of the total Environment, 790, [147877]. https://doi.org/10.1016/j.scitotenv.2021.147877

Hagsten, L. G. & Fisker, J. (2021). Evaluering af eksisterende broers bæreevne. Trafik & Veje, 98(4), 4-6. http://moreinfo.addi.dk/2.11/more_info_get.php?lokalid=39064022&attachment_type=856_a&bibliotek=870971&source_id=870970&key=062adfd2b44aba3b2791

Hudert, M. M., Aranha, C. A. & Fink, G. (2021). Experimental Investigation of Interlocking Birch Plywood Structures. Poster session presented at 2020 World Conference on Timber Engineering, Santiago, Chile.

Aranha, C. A., Hudert, M. M. & Fink, G. (2021). Experimental Investigation of Interlocking Birch Plywood Structures. In International Journal of Space Structures (pp. 155-163). Sage Journals. https://doi.org/10.1177/09560599211022219

Tarpø, M. G., Georgakis, C. T., Brandt, A. & Brincker, R. (2021). Experimental determination of structural damping of a full‐scale building with and without tuned liquid dampers. Structural Control and Health Monitoring, 28(3), [e2676]. https://doi.org/10.1002/stc.2676

Kristoffersen, J. C., Georgakis, C. T., Bredmose, H., Branger, H. & Luneau, C. (2021). Experimental study of the effect of wind above focused waves and the wave-induced loading. Paper presented at Oceans 2021 .

Kristoffersen, J. C., Bredmose, H., Georgakis, C. T., Branger, H. & Luneau, C. (2021). Experimental study of the effect of wind above irregular waves on the wave-induced load statistics. Coastal Engineering, 168, [103940]. https://doi.org/10.1016/j.coastaleng.2021.103940

Knudsen, M. D., Georges, L., Skeie, K. S. & Petersen, S. (2021). Experimental test of a black-box economic model predictive control for residential space heating. Applied Energy, 298, [117227]. https://doi.org/10.1016/j.apenergy.2021.117227

Sauca, A., Mortensen, N., Drustrup, A. & Abbiati, G. (2021). Experimental validation of a hybrid fire testing framework based on dynamic relaxation. Fire Safety Journal, 121, [103315]. https://doi.org/10.1016/j.firesaf.2021.103315

Besklubova, S., Skibniewski, M. J. & Zhang, X. (2021). Factors Affecting 3D Printing Technology Adaptation in Construction. Journal of Construction Engineering and Management, 147(5), [2034]. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002034

Sleiman Nazzal, S., Mikkola, E. & Yildirim, H. C. (2021). Fatigue damage of welded high-strength steel details improved by post-weld treatment subjected to critical cyclic loading conditions. Engineering Structures, 237, [111928]. https://doi.org/10.1016/j.engstruct.2021.111928

Rasmussen, M. K. & Entwistle, J. M. (2021). Fra indsigt til forandring: Et indblik i en arkitekturantropologisk praksis. Jordens Folk - Etnografisk Tidsskrift, 56(2), 131-141. https://tidsskrift.dk/jf/article/view/132630/177749

Ghajargar, M., Bardzell, J., Renner, A. S., Krogh, P. G., Höök, K., Cuartielles, D., Boer, L. & Wiberg, M. (2021). From "Explainable AI" to "Graspable AI". In R. Wimmer (Ed.), TEI' 2021 - Proceedings of the 15th International Conference on Tangible, Embedded, and Embodied Interaction [69] Association for Computing Machinery. https://doi.org/10.1145/3430524.3442704

Tarpø, M., Friis, T., Georgakis, C. & Brincker, R. (2021). Full-field strain estimation of subsystems within time-varying and nonlinear systems using modal expansion. Mechanical Systems and Signal Processing, 153, [107505]. https://doi.org/10.1016/j.ymssp.2020.107505

Matejícka, L., Georgakis, C. T., Koss, H. & Egger, P. (2021). Ice-shedding and aerodynamic investigations of bridge cables with steel wire meshes. In A. Abu (Ed.), Resilient technologies for sustainable infrastructure (pp. 94-102). International Association for Bridge and Structural Engineering. IABSE Reports https://doi.org/10.2749/christchurch.2021

Chen, G., Rong, L. & Zhang, G. (2021). Impacts of urban geometry on outdoor ventilation within idealized building arrays under unsteady diurnal cycles in summer. Building and Environment, 206, [108344]. https://doi.org/10.1016/j.buildenv.2021.108344

Højbjerg, K., Beatini, V. & Kirkegaard, P. H. (2021). Implementation of constructability in conceptual design. In S. A. Behnejad, G. A. R. Parke & O. A. Samavati (Eds.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).

Persson, P., Flodén, O., Danielsson, H., Peplow, A. & Andersen, L. V. (2021). Improved low-frequency performance of cross-laminated timber floor panels by informed material selection. Applied Acoustics, 179, [108017]. https://doi.org/10.1016/j.apacoust.2021.108017

Neve, H. H. (2021). Improving construction labor productivity and efficiency in renovation projects. Aarhus Universitet.

Friis, O. B., Blum, H. B. & Yildirim, H. C. (2021). Influence of imperfections and treatment on high strength cold-formed steel members. In H. Yokota & D. M. Frangopol (Eds.), Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations (Vol. 1). CRC Press. https://doi.org/10.1201/9780429279119

Zhao, Y., Shi, T., Cao, L., Kan, L. & Wu, M. (2021). Influence of steel slag on the properties of alkali-activated fly ash and blast-furnace slag based fiber reinforced composites. Cement and Concrete Composites, 116, [103875]. https://doi.org/10.1016/j.cemconcomp.2020.103875

Aranha, C. A., Hudert, M. M. & Fink, G. (2021). Interlocking birch plywood structures. International Journal of Space Structures, 36(3), 155-163. https://doi.org/10.1177/09560599211022219

Franza, A., Zheng, C., Marshall, A. M. & Jimenez, R. (2021). Investigation of soil–pile–structure interaction induced by vertical loads and tunnelling. Computers and Geotechnics, 139, [104386]. https://doi.org/10.1016/j.compgeo.2021.104386

Sousa Santos, R., Pimenta do Vale, C., Bogoni, B. & Kirkegaard, P. H. (2021). Investigação de campoqualitativaem contexto educacional: Definição e considerações. In P. A. de Castro, S. Sá, A. C. Temer, M. González Sanmamed & R. Arellano Saavedra (Eds.), Qualitative Research in Education: advances and challenges (Vol. 7, pp. 190-199). Ludomedia. New Trends in Qualitative Research Vol. 7 https://doi.org/10.36367/ntqr.7.2021, https://doi.org/10.36367/ntqr.7.2021.190-199

Jacobsen, E. L., Strange, N. S. & Teizer, J. (2021). Lean Construction in a Serious Game Using a Multiplayer Virtual Reality Environment. 55. Paper presented at 29th Annual Conference of the International Group for Lean Construction (IGLC) - Lima, Peru - 2021, Lima, Peru. https://doi.org/10.24928/2021/0160

Johansen, P., Christensen, S., Neve, H. H. & Wandahl, S. (2021). Lean Renovation – a Case Study of Productivity, Flow, and Time Improvements. In L. F. Alarcón & V. González (Eds.), Lean Construction in Crisis Times: Responding to the Post-Pandemic AEC Industry Challenges (pp. 839–848). Pontificia Universidad Católica del Perú. https://doi.org/10.24928/2021/0150

Wang, S., Zhang, G., Wang, Z., Luo, S., Huang, T. & Wu, M. (2021). Long-term performance and hydration of cement mortars with hydroxyethyl methyl cellulose cured at 5℃ low temperature. Construction and Building Materials, 307, [124963]. https://doi.org/10.1016/j.conbuildmat.2021.124963

Yi, Q., Zhang, G., Amon, B., Hempel, S., Janke, D., Saha, C. K. & Amon, T. (2021). Modelling air change rate of naturally ventilated dairy buildings using response surface methodology and numerical simulation. Building Simulation, 14(3), 827-839. https://doi.org/10.1007/s12273-020-0697-z

Displaying results 151 to 200 out of 291

Technical reports

Department of Civil and Architectural Engineering publishes technical reports covering our research areas.

With the reports, we wish to communicate the newest knowledge and research to society ahead of and during the publication process which can take up to a year.

Read the technical reports by following the link below:

Technical Report Department of Civil and Architectural Engineering

PhD dissertations

At the Department of Civil and Architectural Engineering, PhD dissertations are published via Aarhus University Library's/State and University Library's online E-books platform that is open access. You can find the published dissertations by following the link below.

PhD dissertations at the Department of Civil and Architectural Engineering

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Get a copy of the AU Engineering Profile 2022

If you wish to get a copy of AU Engineering Profile 2022, please contact contact@auengineering.au.dk

Revised 06.09.2022

AU Engineering