Publikationer

Under publikationsliste finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Byggeri og Bygningsdesign for eksempel tidsskriftsartikler, bøger, rapporter m.v.

Instituttet udgiver også tekniske rapporter, som du kan læse mere om under Tekniske rapporter.

Under ph.d.-afhandlinger finder du instituttets publicerede ph.d.-afhandlinger.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Kamari, A., Kotula, B. M. & Schultz, C. P. L. (2022). A BIM-based LCA tool for sustainable building design during the early design stage. Smart and Sustainable Built Environment, 11(2), 217-244. https://doi.org/10.1108/SASBE-09-2021-0157

Naik, B. T., Hashmi, M. F. & Bokde, N. D. (2022). A Comprehensive Review of Computer Vision in Sports: Open Issues, Future Trends and Research Directions. Applied Sciences (Switzerland), 12(9), [4429]. https://doi.org/10.3390/app12094429

Goutam, B., Hashimi, M. F., Geem, Z. W. & Bokde, N. (2022). A Comprehensive Review of Deep Learning Strategies in Retinal Disease Diagnosis Using Fundus Images. IEEE Access, 10, 57796-57823. https://doi.org/10.1109/ACCESS.2022.3178372

Shewale, A., Mokhade, A., Funde, N. & Bokde, N. D. (2022). A Survey of Efficient Demand-Side Management Techniques for the Residential Appliance Scheduling Problem in Smart Homes. Energies, 15(8), [2863]. https://doi.org/10.3390/en15082863

Kamari, A. & Schultz, C. P. L. (2022). A combined principal component analysis and clustering approach for exploring enormous renovation design spaces. Journal of Building Engineering , 48, [103971]. https://doi.org/10.1016/j.jobe.2021.103971

Wu, M. & Wang, T. (2022). A probabilistic model framework for microbiologically induced corrosion of concrete sewers. Paper præsenteret ved International Conference on Regeneration and Conservation of Structures (ICRCS) , Tokyo, Japan.

Matejícka, L. & Georgakis, C. T. (2022). A review of ice and snow risk mitigation and control measures for bridge cables. Cold Regions Science and Technology, 193, [103429]. https://doi.org/10.1016/j.coldregions.2021.103429

Beatini, V. & Dias, M. A. (2022). A unifying approach to kinetic structures composed by bar or plate 4R-linkages. Extreme Mechanics Letters, 55, [101833]. https://doi.org/10.1016/j.eml.2022.101833

Jacobsen, E. L., Solberg, A., Golovina, O. & Teizer, J. (2022). Active personalized construction safety training using run-time data collection in physical and virtual reality work environments. Construction Innovation, 22(3), 531-553. https://doi.org/10.1108/CI-06-2021-0113

Huang, T., Zhang, G., Brandt, P., Bjerg, B., Pedersen, P. & Rong, L. (2022). An effective temperature derived from a mechanistic thermophysiological model for sows reared in hot climates. Biosystems Engineering, 220, 19-38. https://doi.org/10.1016/j.biosystemseng.2022.05.015

Franza, A., Miraei, S., Boldini, D. & Losacco, N. (2022). An equivalent beam approach for assessing tunnelling-induced distortions of frames with infills. Tunnelling and Underground Space Technology Journal, 129, [104686]. https://doi.org/10.1016/j.tust.2022.104686

Kan, L., Wang, F., Yafeng, Z., Wei, Y. & Wu, M. (2022). An exploratory study on using red mud waste as a replacement for fly ash to prepare Engineered Cementitious Composites. Construction and Building Materials, 342(Part A), [127900]. https://doi.org/10.1016/j.conbuildmat.2022.127900

Li, L. & Wu, M. (2022). An overview of utilizing CO₂for accelerated carbonation treatment in the concrete industry. Journal of CO2 Utilization, 60, [102000]. https://doi.org/10.1016/j.jcou.2022.102000

Martinez, A., DeJong, J., Akin, I., Aleali, A., Arson, C., Atkinson, J., Bandini, P., Baser, T., Borela, R., Boulanger, R., Burrall, M., Chen, Y., Collins, C., Cortes, D., Dai, S., DeJong, T., Del Dottore, E., Dorgan, K., Fragaszy, R. ... Zheng, J. (2022). Bio-inspired Geotechnical Engineering: principles, current work, opportunities and challenges. Geotechnique, 72(8), 687-705. https://doi.org/10.1680/jgeot.20.P.170

Bugenings, L. A. & Kamari, A. (2022). Bioclimatic Architecture Strategies in Denmark: A Review of Current and Future Directions. Buildings, 12(2), [224]. https://doi.org/10.3390/buildings12020224

Salling, S., Perez, C. T. & Wandahl, S. (2022). Breakdown Work Sampling. I Proc. 30th Annual Conference of the International Group for Lean Construction (IGLC) (s. 223-234). IGLC. https://doi.org/10.24928/2022/0125

Lerche, J., Neve, H. H., Wandahl, S. & Gross, A. (2022). Categorization of the Offshore Wind Production System. International Journal of Operational Research, 43(3), 299-317. https://doi.org/10.1504/IJOR.2022.122338

Franza, A. & Viggiani, G. M. B. (2022). Closure to "role of Shear Deformability on the Response of Tunnels and Pipelines to Single and Twin Tunneling" by Andrea Franza and Giulia M. B. Viggiani. Journal of Geotechnical and Geoenvironmental Engineering, 148(8), [07022018]. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002859

Fan, K., Li, J., Yu, M., Wu, M. & Yao, Y. (2022). Compressive stress-strain relationship for stressed concrete at high temperatures. Fire Safety Journal, 130, [103576]. https://doi.org/10.1016/j.firesaf.2022.103576

Cao, M., Rong, L., Choi, C. Y., Wang, K. & Wang, X. (2022). Computational evaluation of air jet cooling from a perforated air ducting system to mitigate heat stress of cows in free stalls. Computers and Electronics in Agriculture, 199, [107198]. https://doi.org/10.1016/j.compag.2022.107198

Huang, T., Zhang, G. & Rong, L. (2022). Conductive heat loss of sows in a ventilated environment identified by steady CFD-CHT modelling considering thermophysiological effects. Computers and Electronics in Agriculture, 199, [107142]. https://doi.org/10.1016/j.compag.2022.107142

Matejicka, L., Koss, H. H. & Georgakis, C. T. (2022). Cross-flow aerodynamics of bridge cables with wire meshes. Journal of Wind Engineering and Industrial Aerodynamics, 223, [104941]. https://doi.org/10.1016/j.jweia.2022.104941

Ono, Y., Yildirim, H. C., Kinoshita, K. & Nussbaumer, A. (2022). Damage-Based Assessment of the Fatigue Crack Initiation Site in High-Strength Steel Welded Joints Treated by HFMI. Metals, 12(1), [145]. https://doi.org/10.3390/met12010145

Foldager, L., Kaiser, M. Ø., Chen, G., Jensen, L. D., Kristensen, J. K., Kobek-Kjeldager, C., Thodberg, K., Rong, L. & Herskin, M. S. (2022). Deck height during transport of weaners – piglet height and microclimatic conditions inside trucks. 129-142. Paper præsenteret ved Symposium i Anvendt Statistik, København, Danmark. http://www.statistiksymposium.dk/Symposium%202022_Web.pdf

Foldager, L., Kaiser, M. Ø., Chen, G., Jensen, L. D., Kristensen, J. K., Kobek-Kjeldager, C., Thodberg, K., Rong, L. & Herskin, M. S. (2022). Deck height during transport of weaners – piglet height and microclimatic conditions inside trucks. 129-142. Abstract fra Symposium i Anvendt Statistik 2022, København, Danmark.

Foldager, L., Kaiser, M., Chen, G., Jensen, L. D., Kristensen, J. K., Kobek-Kjeldager, C., Thodberg, K., Rong, L. & Herskin, M. S. (2022). Deck height during transport of weaners – piglet height and microclimatic conditions inside trucks. I Book of Abstracts 73rd Annual Meeting of the European Federation of Animal Science EAAP (Bind 28, s. 181-181). Wageningen Academic Publishers. EAAP Book of Abstracts https://doi.org/10.3920/978-90-8686-937-4

Jacobsen, E. L. & Teizer, J. (2022). Deep Learning in Construction: Review of Applications and Potential Avenues. Journal of Computing in Civil Engineering, 36(2), [03121001]. https://doi.org/10.1061/(ASCE)CP.1943-5487.0001010

Thulasya Naik, B., Hashmi, M. F., Geem, Z. W. & Bokde, N. D. (2022). DeepPlayer-Track: Player and Referee Tracking With Jersey Color Recognition in Soccer. IEEE Access, 10, 32494-32509. https://doi.org/10.1109/ACCESS.2022.3161441

Liu, Y., Zheng, D., Georgakis, C., Kabel, T., Cao, E., Wu, X. & Ma, J. (2022). Deformation Analysis of an Ultra‐High Arch Dam under Different Water Level Conditions Based on Optimized Dynamic Panel Clustering. Applied Sciences (Switzerland), 12(1), [481]. https://doi.org/10.3390/app12010481

Kristoffersen, J. C. (2022). Direct effect of wind on wave-induced loading. Aarhus Universitet.

Wang, X., Cao, M., Hu, F., Yi, Q., Amon, T., Janke, D., Xie, T., Zhang, G. & Wang, K. (2022). Effect of Fans’ Placement on the Indoor Thermal Environment of Typical Tunnel-Ventilated Multi-Floor Pig Buildings Using Numerical Simulation. Agriculture (Switzerland), 12(6), [891]. https://doi.org/10.3390/agriculture12060891

Zhao, Y., Zhu, Z., Chen, Y., Li, S., Zhao, Y., Li, X., Wu, M. & Chen, D. (2022). Effect of TEA·H₃PO₄ and TEA·C₁₈H₃₀O₃S on the mechanical properties and hydration characteristics of cement paste. Construction and Building Materials, 314(Part B), [125635]. https://doi.org/10.1016/j.conbuildmat.2021.125635

Gentile, N., Lee, E. S., Osterhaus, W., Altomonte, S., Naves David Amorim, C., Ciampi, G., Garcia-Hansen, V., Maskarenj, M., Scorpio, M. & Sibilio, S. (2022). Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies. Energy and Buildings, 268, [112191]. https://doi.org/10.1016/j.enbuild.2022.112191

Campagnolo, A., Belluzzo, F., Yildirim, H. C. & Meneghetti, G. (2022). Fatigue strength assessment of as-welded and HFMI treated welded joints according to structural and local approaches. International Journal of Fatigue, 155, [106584]. https://doi.org/10.1016/j.ijfatigue.2021.106584

Franza, A., Sørensen, K. K., Stutz, H. H., Pettey, A., Heron, C. & Marshall, A. (2022). Field and centrifuge modelling of a pumped underground hydroelectric energy storage system in sand. I 10th International Conference on Physical Modelling in Geotechnics 2022 (s. 754-757)

Perez, C. T., Salling, S. & Wandahl, S. (2022). Five Guidelines for Adopting Smartwatches in Construction: A Novel Approach for Understanding Workers’ Efficiency Based on Travelled Distances and Locations. Sustainability, 14(14), [8875]. https://doi.org/10.3390/su14148875

Tao, H., Hameed, M. M., Marhoon, H. A., Zounemat-Kermani, M., Heddam, S., Sungwon, K., Sulaiman, S. O., Tan, M. L., Sa'adi, Z., Mehr, A. D., Allawi, M. F., Abba, S. I., Zain, J. M., Falah, M. W., Jamei, M., Bokde, N. D., Bayatvarkeshi, M., Al-Mukhtar, M., Bhagat, S. K. ... Yaseen, Z. M. (2022). Groundwater level prediction using machine learning models: A comprehensive review. Neurocomputing, 489, 271-308. https://doi.org/10.1016/j.neucom.2022.03.014

Ogrizovic, J., Abbiati, G., Stojadinović, B. & Frangi, A. (2022). Hybrid simulation of a post-tensioned timber frame and validation of numerical models for seismic design. Engineering Structures, 265, [114415]. https://doi.org/10.1016/j.engstruct.2022.114415

Brahmi, B. F., Boudemagh, S. S., Kitouni, I. & Kamari, A. (2022). IPD and BIM-focussed methodology in renovation of heritage buildings. Construction Management and Economics, 40(3), 186-206. https://doi.org/10.1080/01446193.2021.1933557

Lerche, J., Wandahl, S. & Neve, H. H. (2022). Identifying the impact on labor productivity from design choices through work sampling. I International Group for Lean Construction (Bind 30). [159] IGLC. https://doi.org/10.24928/2022/0159

Yu, X., Skeie, K. S., Knudsen, M. D., Ren, Z., Imsland, L. & Georges, L. (2022). Influence of data pre-processing and sensor dynamics on grey-box models for space-heating: Analysis using field measurements. Building and Environment, 212, [108832]. https://doi.org/10.1016/j.buildenv.2022.108832

Christiansen, M. & Kamari, A. (2022). Integrated informed design processes: A mapping of building performance criteria in the Danish conventional design practice. I M. Frier Hvejsel & P. J. S. Cruz (red.), Structures and Architecture: A Viable Urban Perspective? (s. 705-712). CRC Press. Structures and Architecture Bind 2 https://doi.org/10.1201/9781003023555

Wolf, M., Teizer, J., Wolf, B., Bükrü, S. & Solberg, A. (2022). Investigating hazard recognition in augmented virtuality for personalized feedback in construction safety education and training. Advanced Engineering Informatics, 51, [101469]. https://doi.org/10.1016/j.aei.2021.101469

Huang, T., Rong, L. & Zhang, G. (2022). Investigating the feasibility of using computational fluid dynamics based response surface methodology and neural network to model the performance of the individualised ventilation in sow houses. Biosystems Engineering, 214, 138-151. https://doi.org/10.1016/j.biosystemseng.2021.12.015

Herskin, M. S., Kobek-Kjeldager, C., Kaiser, M. Ø., Thodberg, K., Jensen, L. D., Chen, G., Zhang, G., Rong, L. & Foldager, L., (2022). Krav til indvendig højde ved transport af smågrise, Nr. 2020-0096886, 15 s., jul. 05, 2022.

Sørensen, S. B., Toftum, J., Clausen, G., Jensen, K. L. & Kristensen, K. V. (2022). Large-scale study of Classroom VOCs: Sources, Dynamics, and Indoor Air Quality Impacts. I Proceedings of Indoor Air 2022 [1401] International Society of Indoor Air Quality and Climate.

Teizer, J. & Chronopoulos, C. (2022). Learning Factory for Construction to Provide Future Engineering Skills beyond Technical Education and Training. I F. Jazizadeh, T. Shealy & M. J. Garvin (red.), Construction Research Congress 2022: Health and Safety, Workforce, and Education (s. 224-233). American Society of Civil Engineers. https://doi.org/10.1061/9780784483985.023

Perez, C. T., Salling, S. & Wandahl, S. (2022). Location-Based Work Sampling. I Proc. 30th Annual Conference of the International Group for Lean Construction (IGLC) (s. 187-198). IGLC. https://doi.org/10.24928/2022/0121

Jacobsen, E. L. & Teizer, J. (2022). Neural Networks in the Construction Industry: Knowledge Gaps and Possibilities. I F. Jazizadeh, T. Shealy & M. J. Garvin (red.), Construction Research Congress 2022: Computer Applications, Automation, and Data Analytics - Selected Papers from Construction Research Congress 2022 (s. 1174-1183). American Society of Civil Engineers. https://doi.org/10.1061/9780784483961.123

Watford, M., Templeman, J., Orazalin, Z., Zhou, H., Franza, A. & Sheil, B. (2022). Numerical analysis of the deep soil failure mechanism for perimeter pile groups. Geotechnique Letters, 12(1), 27-34. https://doi.org/10.1680/jgele.21.00080

Viser resultater 1 til 50 ud af 222

Næste

Tekniske rapporter

Institut for Byggeri og Bygningsdesign udgiver en serie af tekniske rapporter.

Formålet med rapporterne er at formidle aktuel viden til omverdenen forud for og under publiceringsprocessen, som i nogle tilfælde kan tage op til et år.

Læs de tekniske rapporter ved at klikke nedenfor:

Technical Report Department of Civil and Architectural Engineering

Phd-afhandlinger

Ph.d.-afhandinger ved Institut for Byggeri og Bygningsdesign udgives gennem Statsbibliotekets/AU library's online E-books platform, hvor der er open access. Du kan finde publicerede afhandlinger ved at følge linket nedenfor.

Ph.d.-afhandlinger ved Institut for Byggeri og Bygningsdesign

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Få tilsendt AU Engineering Profile 2022

Ønsker du at modtage et eksemplar af AU Engineering Profile 2022, er du velkommen til at sende en mail til contact@auengineering.au.dk

Revideret 06.09.2022

AU Engineering