Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Lees, A. S. & Clausen, J. C. S. (2020). Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests. Canadian Geotechnical Journal, 57(3), 448-452. https://doi.org/10.1139/cgj-2019-0036

Laustsen, H. (2009). Kompendium i betonberegninger BK201. Ingeniørhøjskolen i Aarhus.

Lanese, I., Pavese, A., Abbiati, G. & S. Bursi, O. (2017). Hybrid Testing of Seismic Isolated Structures: Test Reliability and Scaling Issues. In 7th International Conference on Advances in Experimental Structural Engineering

Lamperti Tornaghi, M., Tsionis, G., Pegon, P., Molina, J., Peroni, M., Korzen, M., Tondini, N., Covi, P., Abbiati, G., Antonelli, M. & Gilardi, B. (2021). Experimental study of braced steel frames subjected to fire after earthquake. In 2021 17WCEE Proceedings Article C001800

Kristoffersen, J. C., Bredmose, H. & Georgakis, C. T. (2018). Preliminary Numerical Study on the Influence of a Wind Field on Wave-induced Load on a Circular Cylinder. Proceedings of the International Offshore and Polar Engineering Conference, 2018, 291-298. https://www.onepetro.org/conference-paper/ISOPE-I-18-500

Kristoffersen, J. C., Bredmose, H., Georgakis, C. T. & Tao, L. (2019). Preliminary Experimental Study on the Influence of the Local Wind Field on Forces From Breaking Waves on a Circular Cylinder. In Ocean Engineering: Volume 7B: Ocean Engineering Article OMAE2019-95179, V07BT06A017 American Society of Mechanical Engineers. https://doi.org/10.1115/OMAE2019-95179

Kristoffersen, J. C., Bredmose, H., Georgakis, C. T., Branger, H. & Luneau, C. (2021). Experimental study of the effect of wind above irregular waves on the wave-induced load statistics. Coastal Engineering, 168, Article 103940. https://doi.org/10.1016/j.coastaleng.2021.103940

Kristoffersen, J. C., Georgakis, C. T., Bredmose, H., Branger, H. & Luneau, C. (2021). Experimental study of the effect of wind above focused waves and the wave-induced loading. Paper presented at Oceans 2021 . https://doi.org/10.23919/OCEANS44145.2021.9705740

Kristoffersen, J. C., Bredmose, H., Georgakis, C. T. & Pierella, F. (2022). Numerical study of the effect of wind above irregular waves on the wave-induced load statistics. Coastal Engineering, 176, Article 104145. https://doi.org/10.1016/j.coastaleng.2022.104145

Kristoffersen, J. C., Kabel, T., Georgakis, C. T. & Desai, N. (2024). Performance Study of Cost-Effective LiDAR Instrument Measuring Surface Waves in a Laboratory. In Proceedings of the 34th International Ocean and Polar Engineering Conference, 2024 (pp. 2213-2219)

Kristoffersen, J. C. (2022). Direct effect of wind on wave-induced loading. [PhD dissertation, Aarhus University]. Aarhus Universitet.

Kristoffersen, J. C., Kabel, T., Georgakis, C. T. & Karmpadakis, I. (2025). Accurate Spatio-Temporal Measurements of Extreme Waves Using LiDAR in the Laboratory. In Proceedings of the ASME 2025 44th International Conference on Ocean, Offshore and Arctic Engineering. : Volume 3: Ocean Engineering; Polar and Arctic Sciences and Technology Article v003t06a038 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/OMAE2025-156743

Kristoffersen, J. C., Kabel, T., Georgakis, C. T., Bellos, V. & Karmpadakis, I. (2026). Spatio-temporal measurement of laboratory wave fields using LiDAR. Coastal Engineering, 209, Article 105047. https://doi.org/10.1016/j.coastaleng.2026.105047

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2012). The Bearing Capacity of Circular Footings in Sand. Advances in Civil Engineering, 2012, Article 947276. https://doi.org/10.1155/2012/947276

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (Ed.) (2010). 1g Model Tests with Foundations in Sand. CRC Press. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (2010). 1g Model Tests with Foundations in Sand. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Krabbenhoft, S. & Damkilde, L. (2024). Design of Rectangular Footings in Cohesionless Soil Subjected to Torsion. International Journal of Geomechanics, 24(9), Article 04024198. https://doi.org/10.1061/IJGNAI.GMENG-9826

Krabbe, J. Z., Sørensen, K. K. & Lodahl, M. R. (2024). Effects of physical characteristics on the shear behaviour of Foulum glaciofluvial sand. In N. Guerra, M. Matos Fernandes, C. Ferreira, A. Gomes Correia, A. Pinto & P. Sêco Pinto (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (1 ed.). CRC Press. https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003431749-90/effects-physical-characteristics-shear-behaviour-foulum-glaciofluvial-sand-krabbe-s%C3%B8rensen-lodahl

Koteras, A. K., Ibsen, L. B., Clausen, J. C., Chung, J. S. (Ed.) & Wang, H. H. (Ed.) (2016). Seepage Study for Suction Installation of Bucket Foundation in Different Soil Combinations. International Society of Offshore & Polar Engineers. http://www.isope.org/publications/publications.htm

Knysh, V., Solovei, S., Motrunich, S., Nyrkova, L. & Yildirim, H. C. (2021). Influence of the accelerated corrosion exposure on the fatigue behaviour of welded joints treated by high frequency mechanical impact. International Journal of Fatigue, 149, Article 106272. https://doi.org/10.1016/j.ijfatigue.2021.106272

Knudsen, B. S., Østergaard, M. U., Ibsen, L. B. & Clausen, J. (2013). Determination of p-y Curves for Bucket Foundations in Sand Using Finite Element Modeling. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Determination-of-p-y-Curves-for-Bucket-Foundations-Knudsen-%C3%98stergaard/fe45ff20165111d29fe871b297344f574fc797f1

Knudsen, B. S., Østergaard, M. U. & Clausen, J. (2013). Implementation of a Stress-dependent Strength Material Model in PLAXIS 3D. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Implementation-of-a-Stress-dependent-Strength-Model-Knudsen-%C3%98stergaard/e9e855ea2dbfa781db5e23761e345d99cebf7bda

Knudsen, J., Sørensen, K. K., Steenfelt, J. S. & Trankjær , H. (2019). Design of bored piles in Denmark - a historical perspective. Paper presented at XVII European Conference on Soil Mechanics and Geotechnical Engineering, Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0732

Knudsen, J., Sørensen, K. K., Steenfelt, J. S. & Trankjær , H. (2021). Tension tests on bored instrumented piles installed in marine Eocene clay. IOP Conference Series: Earth and Environmental Science, 710(1), Article 012034. https://doi.org/10.1088/1755-1315/710/1/012034

K. L. Wong, E., Franza, A., Acikgoz, S. & Viggiani, G. M. B. (2021). A simple coupled analysis of an arch bridge subjected to tunnelling induced movements. In M. Barla, A. Di Donna & D. Sterpi (Eds.), Challenges and Innovations in Geomechanics - Proceedings of the 16th International Conference of IACMAG - Volume 2: Proceedings of the 16th International Conference of IACMAG - Volume 2 (Vol. 2, pp. 231-238). Springer. https://doi.org/10.1007/978-3-030-64518-2_28

K. L. Wong, E., Franza, A., Alagha, A. S. N. & Viggiani, G. M. B. (2024). A continuum analysis of piles affected by an advancing tunnel excavation during centrifuge tests with a miniature TBM. In Geotechnical Aspects of Underground Construction in Soft Ground (pp. 206-214) https://doi.org/10.1201/9781003413790-24

K. L. Wong, E., Franza, A. & Viggiani, G. M. B. (2025). Empirical prediction of horizontal movements induced by tunnelling in fine-grained soils. Canadian Geotechnical Journal, 62. https://doi.org/10.1139/cgj-2024-0049

K. L. Wong, E., Franza, A., Peter , H. & Viggiani, G. M. B. (2026). An assessment methodology for tunnelling beneath bridges considering soil–structure interaction. Tunnelling and Underground Space Technology Journal, 176, Article 107810. https://doi.org/10.1016/j.tust.2026.107810

Klar, A., Franza, A., Zhou, M. & Huang, H. W. (2025). Introducing tunnel kinematic constraints into an elastic continuum formulation of tunnel-soil-pipeline interaction. Geotechnique, 75(13). https://doi.org/10.1680/jgeot.24.00023

Klar, A., Franza, A., von Solms, N., Lev Yehudi, O., Minh Tang, A., Llabjani, Q., Dalmazzone, D. & Laloui, L. (2025). Required Research Steps Towards the Realization of CO2-Hydrate Geo-Capsules for Underground Mechanical Energy Storage. https://hal.science/hal-05344043/

Kirkegaard, P. H., Andersen, L. V. & Dickow, K. A. (2012). On the Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures: a comparison of abaqus and ansys. In Abstract Program: Inter-noise 2012 (pp. 432). Institute of Noise Control Engineering of the USA, Inc.. http://www.internoise2012.com/index.shtml

Kirkegaard, P. H., Andersen, L. V. & Dickow, K. A. (2012). On the Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures: a comparison of abaqus and ansys. In Proceedings of the Internoise 2012/ASME NCAD meeting Institute of Noise Control Engineering of the USA, Inc.. http://www.internoise2012.com/index.shtml

Kirkegaard, P. H., Andersen, L., Dickow, K. A. & Domadiya, P. G. (2013). FEA of the Variations in Sound Insulation in Nominally Identical Prefabricated Lightweight Timer Panel Structures. In Inter Noise 2013: Noise control for quality of life (Vol. 1, pp. 1136-1143). Curran Associates.

Kirkegaard, P. H., Dickow, K. A., Andersen, L. V. & Sjöström, A. (2012). Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures: a comparison of ABAQUS and ANSYS. In B. H. V. Topping (Ed.), Proceedings of the Eleventh International Conference on Computational Structures Technology Article 195 Civil-Comp Press. https://doi.org/10.4203/ccp.99.195

Kirkegaard, P. H., Dickow, K. A., Andersen, L. V. & Sjöström, A. (2012). Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures: a comparison of ABAQUS and ANSYS. In B. H. V. Topping (Ed.), Proceedings of the Eleventh International Conference on Computational Structures Technology: CST2012 & ECT2012 Article 195 Civil-Comp Press. https://doi.org/10.4203/ccp.99.195

Kiel, N., Andersen, L. V., Niu, B. & Persson, K. (2012). Different Modelling Approaches to Coupling Wall and Floor Panels within a Dynamic Finite Element Model of a Lightweight Building. In B. H. V. Topping (Ed.), Proceedings of the Eleventh International Conference on Computational Structures Technology Article 190 Civil-Comp Press.

Khan, J., Thygesen, J., Wei, R., Wu, M., Nielsen, R. P. & Simonsen, M. E. (2024). An innovative approach utilizing reinforced scale and cement as a combined barrier material for well abandonment. Poster session presented at Danish Offshore Technology Conference 2024, Copenhagen, Denmark.

Katsanos, E., Arrospide Sanz, A., Georgakis, C. T. & Thöns, S. (2017). Multi-hazard response analysis of a 5MW offshore wind turbine. Procedia Engineering, 199, 3206-3211. https://doi.org/10.1016/j.proeng.2017.09.548

Kania, J. G. & Sørensen, K. K. (2018). A Static Pile Load Test on a Bored Pile Instrumented with Distributed Fibre Optic Sensors. Paper presented at 10th International Symposium On Field Measurements In Geomechanics, Rio de Janeiro, Brazil. https://www.issmge.org/uploads/publications/80/81/S34-Kania.pdf

Kania, J. G. & Sørensen, K. K. (2019). A case study of soil-pile interaction in soft soils. Paper presented at 17th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE) , Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0280

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2020). Application of Distributed Fibre Optic Cables in Piles. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 51(1), 94-102. Article 12. http://seags.ait.asia/journals/33953-seags-agssea-journal-march-2020/

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2020). Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand. International Journal of Geoengineering Case Histories, 5(3), 170-181. https://doi.org/10.4417/IJGCH-05-03-03

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2020). Driven piles installed in soft soils subjected to vertical and lateral soil movement. Paper presented at GeoVirtual 2020, Canada.

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2021). Shear stress between a soft soil and various pile materials. Paper presented at 74th Canadian Geotechnical Conference, Niagara, Canada.

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2024). The development of unit shaft resistance along driven piles in subsiding soil. Canadian Geotechnical Journal, 61(5), 1035-1050. https://doi.org/10.1139/cgj-2022-0694

Kania, J. G., de Sousa, L. L. C. G., Hededal, O. & Sørensen, K. K. (2024). Numerical modelling of soil-pile interaction in a subsiding soil. In N. Guerra, M. Matos Fernandes, C. Ferreira, A. Gomes Correia, A. Pinto & P. Sêco Pinto (Eds.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (1. ed.). CRC Press. https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003431749-86/numerical-modelling-soil-pile-interaction-subsiding-soil-kania-de-sousa-hededal-s%C3%B8rensen?context=ubx&refId=a3c3c516-f318-42d4-bb78-e4b03befcf8d

Kan, L., Lv, J., Duan, B. & Wu, M. (2019). Self-healing of Engineered Geopolymer Composites prepared by fly ash and metakaolin. Cement and Concrete Research, 125, Article 105895. https://doi.org/10.1016/j.cemconres.2019.105895

Kan, L., Zhang, L., Zhao, Y. & Wu, M. (2020). Properties of polyvinyl alcohol fiber reinforced fly ash based Engineered Geopolymer Composites with zeolite replacement. Construction and Building Materials, 231, Article 117161. https://doi.org/10.1016/j.conbuildmat.2019.117161

Displaying results 351 to 400 out of 834

Back to the main page

Revised 13.11.2025

AU Engineering