Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Clausen, J. (2012). 3rd Semester and Master’s Thesis Ideas 2012: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. https://www.yumpu.com/en/document/view/42046457/3rd-semester-and-masters-thesis-ideas-2012-vbn-aalborg-

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2012). The Bearing Capacity of Circular Footings in Sand. Advances in Civil Engineering, 2012, Article 947276. https://doi.org/10.1155/2012/947276

Clausen, J. (Ed.) (2011). 3rd Semester and Master’s Thesis Ideas 2011: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (2007). Efficient Finite Element Calculation of Nγ.

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J., Finn, M. & Mattner, T. (2008). Delamination of Compressed thin Layers at Corners. International Congress of Theoretical and Applied Mechanics.

Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J. (Ed.), Finn, M. (Ed.) & Mattner, T. (Ed.) (2008). Delamination of Compressed thin Layers at Corners.

Clausen, J., Krabbenhoft, K., Schrefler, B. A. (Ed.) & Perego, U. (Ed.) (2008). Existence and Uniqueness of Solutions in Nonassociated Mohr-coulomb Elastoplasticity. https://www.researchgate.net/publication/238706804_Existence_and_uniqueness_of_solutions_in_nonassociated_Mohr-Coulomb_elastoplasticity

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (Ed.) (2007). Efficient Finite Element Calculation of Ny . Civil-Comp Press.

Clausen, J. (2007). Efficient Non-Linear Finite Element Implementation of Elasto-Plasticity for Geotechnical Problems. Esbjerg Institute of Technology, Aalborg University. https://www.semanticscholar.org/paper/Efficient-Non-Linear-Finite-Element-Implementation-Clausen/0b7b50d1e1fbff07b31982ec086d9621c1001c22

Clausen, J. C., Damkilde, L., Dahlblom, O. (Ed.), Fuchs, L. (Ed.), Persson, K. (Ed.), Ristinmaa, M. (Ed.), Sandberg, G. & Svensson, I. (2006). A Simple And Efficient FEM-Implementation Of The Modified Mohr-Coulomb Criterion. Lund Universitet. https://www.semanticscholar.org/paper/A-Simple-And-Efficient-FEM-Implementation-Of-The-Clausen-Damkilde/a87c59800833162b6053e17f4c0142c6548e2d00

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Clausen, J., Damkilde, L., Paavola, J. (Ed.) & Freund, J. (Ed.) (2005). Slope Safety Calculation With A Non-Linear Mohr Criterion Using Finite Element Method. Finnish Association for Structural Mechanics.

Clausen, J. (2010). M.Sc. in Civil and Structural Engineering: 3rd Semester and Master’s Thesis Ideas 2010. Department of Civil Engineering, Aalborg University. DCE Latest News No. 15

Clausen, J. (2009). 3rd Semester and Master's Thesis Ideas: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 9

Clausen, J. & Sørensen, E. V. (2010). Simulation of Thermally Induced Stress during Hardening of Large Concrete Cubes. Department of Civil Engineering, Aalborg University. DCE Contract Reports No. 74

Clausen, J. & Damkilde, L. (2007). An Exact Implementation Of The Hoek–Brown Criterion For Elasto-Plastic Finite Element Calculations. International Journal of Rock Mechanics and Mining Sciences, 45(6), 831-847. https://doi.org/10.1016/j.ijrmms.2007.10.004

Clausen, J. C. (Ed.) (2017). Third Semester and Master’s Thesis Ideas 2017: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 53

Andersen, T. L. & Clausen, J. C. (Eds.) (2018). Third Semester and Master’s Thesis Ideas 2018: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 57

Clausen, J. C. (Ed.) (2019). Third Semester and Master’s Thesis Ideas 2019: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 58

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2017). Comparison of numerical formulations for the modeling of tensile loaded suction buckets. Computers and Geotechnics, 83, 198-208. https://doi.org/10.1016/j.compgeo.2016.10.026

Abbiati, G., Lanese, I., Cazzador, E., S. Bursi, O. & Pavese, A. (2019). A computational framework for fast-time hybrid simulation based on partitioned time integration and state-space modeling. Structural Control and Health Monitoring, 26(10), Article e2419. https://doi.org/10.1002/stc.2419

Tarpø, M., Friis, T., Olsen, P., Juul, M., Georgakis, C. & Brincker, R. (2019). Automated reduction of statistical errors in the estimated correlation function matrix for operational modal analysis. Mechanical Systems and Signal Processing, 132, 790-805. https://doi.org/10.1016/j.ymssp.2019.07.024

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). The effect of modal truncation and spatial distribution in load identification. In S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (Eds.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (pp. 553-557). International Operational Modal Analysis Conference (IOMAC). https://www.researchgate.net/publication/331319800_The_effect_of_modal_truncation_and_spatial_distribution_in_load_identification

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). Identifying Wave Loads During Random Seas Using Structural Response. In Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019 (pp. 2673-2678). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331249021_Identifying_Wave_Loads_During_Random_Seas_Using_Structural_Response

Kabel, T., Georgakis, C. T. & Rod Zeeberg, A. (2019). Mapping Ocean Waves using New LIDAR Equipment. In Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference (pp. 2558-2562). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331345622_Mapping_Ocean_Waves_using_LIDAR_Technology

Persson, P., Kallivokas, L., Andersen, L. V. & T. Peplow, A. (2019). How building adjacency affects occupant-perceivable vibrations due to urban sources: A parametric study. In M. Papadrakakis & M. Fragiadakis (Eds.), Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Vol. 3, pp. 5610-5621). National Technical University of Athens. https://doi.org/10.7712/120119.7331.18833

Andersen, L. V., T. Peplow, A. & Persson, P. (2019). Mitigation of ground vibrations by circular arrays of rigid blocks. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Vol. 2, pp. 3422-3447). National Technical University of Athens. https://2019.compdyn.org/proceedings/pdf/18943.pdf

T. Peplow, A., Andersen, L. V. & Persson, P. (2019). Computation of axisymmetric vibration transmission using a well-conditioned system for elastic layers over a half–space. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Vol. 2, pp. 4548-4556). National Technical University of Athens. https://2019.compdyn.org/proceedings/pdf/18695.pdf

Tarpø, M. G., Silva Nabuco, B., Georgakis, C. T. & Brincker, R. (2019). The Effect of Operational Modal Analysis in Strain Estimation using the Modal Expansion. 699-705. Paper presented at International Operational Modal Analysis Conference 2019, København, Denmark.

Baumgartner, J., Yıldırım, H. C. & Barsoum, Z. (2019). Fatigue strength assessment of TIG-dressed welded steel joints by local approaches. International Journal of Fatigue, 126, 72-78. https://doi.org/10.1016/j.ijfatigue.2019.04.038

Abbiati, G., Broccardo, M., Marelli, S. & Sudret, B. (2018). A Novel Seismic Structural Testing Protocol Based on Hybrid Simulation, Kriging and Active Learning: Methodology and Numerical Examples. In Proceedings of the 19th IFIP WG 7.5 Working Conference on Reliability and Optimization of Structural Systems

Ogrizovic, J., Abbiati, G., Stojadinovic, B. & Frangi, A. (2018). Hybrid Simulation of a Two-Storey Two-Bay Post-Tensioned Timber Frame. In 16TH European Conference on Earthquake Engineering Article 10142

Abbiati, G. & Stojadinovic, B. (2018). Multi-Axial Subassemblage Testing Stand for Hybrid Simulations up to Six Physical Degrees-of-Freedom. In 16TH European Conference on Earthquake Engineering Article 10943

Abbiati, G., Broccardo, M., Max, D., Beyer, K. & Stojadinovic, B. (2018). Development of a Probabilistic Model for Predicting Cracks On Unreinforced Masonry Wall Plaster Caused by Induced Seismic Hazard. In 16TH European Conference on Earthquake Engineering

Abbiati, G. & Stojadinovic, B. (2018). Multi-Axial Subassemblage Testing Stand for Large-Scale Hybrid Simulations. In Integrating Science, Engineering & Policy: 11th National Conference on Earthquake Engineering 2018 (11NCEE) (Vol. 7, pp. 4428-4439). Curran Associates.

Abbiati, G., Broccardo, M., Petrovic, M. & Stojadinovic, B. (2018). Calibration Of A Probabilistic Fatigue Model for Predicting Plaster Cracks on Unreinforced Masonry Walls Caused by Induced Seismic Hazard. In Eleventh U.S. National Conference on Earthquake Engineering Integrating Science, Engineering & Policy Earthquake Engineering Research Institute (EERI).

Lanese, I., Pavese, A., Abbiati, G. & S. Bursi, O. (2017). Hybrid Testing of Seismic Isolated Structures: Test Reliability and Scaling Issues. In 7th International Conference on Advances in Experimental Structural Engineering

Abbiati, G., La Salandra, V., S. Bursi, O. & Caracoglia, L. (2017). A Method for Mixing Online and Offline Experimental Dynamic Substructuring Algorithms for Hybrid Simulations. In Proceedings of the 7th International Conference on Advances in Experimental Structural Engineering (7AESE),

Abbiati, G. & Stojadinovic, B. (2017). Multi-axial subassemblage testing at ETH Zürich: a newly conceived test stand for large-scale hybrid simulations. In Proceedings of the 7th International Conference on Advances in Experimental Structural Engineering

Tondini, N., Abbiati, G., S. Bursi, O. & Stojadinovic, B. (2017). Partitioned algorithm for hybrid fire testing up to structural collapse. In COUPLED PROBLEMS 2017 International Center for Numerical Methods in Engineering Barcelona (CIMNE).

Abbiati, G., Abdallah, I., Marelli, S., Sudret, B. & Stojadinovic, B. (2017). Hierarchical kriging for combining multi-fidelity hybrid and computational simulators. In 7th International Conference on Coupled Problems in Science and Engineering International Center for Numerical Methods in Engineering Barcelona (CIMNE).

S. Bursi, O., Abbiati, G., Di Filippo, R. & La Salandra, V. (2017). Online/offline dynamic substructuring methods for the seismic characterization of coupled tank-piping system response. In VII International Conference on Coupled Problems in Science and Engineering

Max, D., Abbiati, G., Broccardo, M., Beyer, K., Laurentiu, D., Petrovic, M., Mojsilovic, N. & Stojadinovic, B. (2017). Quantification of non-structural damage in unreinforced masonry walls induced by geothermal reservoir exploration using quasi-static cyclic tests. In 13th Canadian Masonry Symposium

Maienza, C., Avossa, A. M., Ricciardelli, F., Scherillo, F. & Georgakis, C. T. (2019). A Comparative Analysis of Construction Costs of Onshore and Shallow- and Deep-Water Offshore Wind Farms. In F. Ricciardelli & A. M. Avossa (Eds.), Proceedings of the XV Conference of the Italian Association for Wind Engineering (pp. 440-453). Springer. https://doi.org/10.1007/978-3-030-12815-9_35

Caterino, N., Georgakis, C. T., Spizzuoco, M. & Chen, J. (2019). Mitigation of Structural Demand to Wind Turbines: Experimental Investigation of Three Control Strategies. In F. Ricciardelli & A. M. Avossa (Eds.), Proceedings of the XV Conference of the Italian Association for Wind Engineering (pp. 165-178). Springer. https://doi.org/10.1007/978-3-030-12815-9_14

Abbiati, G., Miraglia, G., Mojsilovic, N. & Stojadinovic, B. (2017). Hybrid simulation with dynamic substructuring of masonry structures: a numerical study. In 13th Canadian Masonry Symposium

Whyte, C. A., Mackie, K., Abbiati, G. & Stojadinovic, B. (2017). Selection of optimal time-scaling for thermomechanical hybrid simulation. In Proceedings of the 16th World Conference on Earthquake Engineering Article 1675

Abbiati, G., Whyte, C. A., Dertimanis, V. & Stojadinovic, B. (2017). Hybrid simulation of large-scale structures at ETH Zürich: the new 8-actuator multi-axial subassemblage testing (MAST) setup. In 16th World Conference on Earthquake Engineering

Abbiati, G., Schöbi, R., Sudret, B. & Stojadinovic, B. (2017). Structural Reliability Analysis Using Deterministic Hybrid Simulations and Adaptive Kriging Metamodeling. In Proceedings of the 16th World Conference on Earthquake Engineering

Displaying results 301 to 350 out of 773

Back to the main page

Revised 18.09.2024

AU Engineering