Publications by Structural Dynamics and Geotechnical Engineering

Are you looking for publications by the Section of Structural Dynamics and Geotechnical Engineering? On this page you can find all the publications made by the Section of Structural Dynamics and Geotechnical Engineering by Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2015). Finite element implementation of the Hoek-Brown material model with general strain softening behavior. International Journal of Rock Mechanics and Mining Sciences, 78, 163-174. https://doi.org/10.1016/j.ijrmms.2015.05.005

Gnaur, D. & Clausen, J. (2015). Teaching Smart with Podcasts. International Journal of Engineering Education, 31(2), 486-494.

Knudsen, B. S., Østergaard, M. U., Ibsen, L. B. & Clausen, J. (2013). Determination of p-y Curves for Bucket Foundations in Sand Using Finite Element Modeling. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Determination-of-p-y-Curves-for-Bucket-Foundations-Knudsen-%C3%98stergaard/fe45ff20165111d29fe871b297344f574fc797f1

Clausen, J. (2013). Bearing Capacity of Circular Footings on a Hoek–Brown Material. International Journal of Rock Mechanics and Mining Sciences, 57, 34-41. https://doi.org/10.1016/j.ijrmms.2012.08.004

Clausen, J., Damkilde, L. & Schweiger, H. F. (Ed.) (2006). Slope Safety Factor Calculations With Non-Linear Yield Criterion Using Finite Elements. CRC Press. https://www.researchgate.net/publication/300434236_Slope_safety_factor_calculations_with_non-linear_yield_criterion_using_finite_elements

Clausen, J. (Ed.) (2013). 3rd Semester and Master’s Thesis Ideas 2013: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (Ed.) (2010). 1g Model Tests with Foundations in Sand. CRC Press. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Sørensen, K. W., Nielsen, S. K., Shajarati, A. & Clausen, J. (2012). Modified Critical State Two-Surface Plasticity Model for Sands. Department of Civil Engineering, Aalborg University.

Suchowerska, A. M., Merifield, R. S., Carter, J. P. & Clausen, J. (2012). Prediction of Underground Cavity Roof Collapse using the Hoek–Brown Failure Criterion. Computers and Geotechnics, 44, 93-103. https://doi.org/10.1016/j.compgeo.2012.03.014, https://doi.org/10.1016/j.compgeo.2012.03.014

Clausen, J. (2012). 3rd Semester and Master’s Thesis Ideas 2012: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. https://www.yumpu.com/en/document/view/42046457/3rd-semester-and-masters-thesis-ideas-2012-vbn-aalborg-

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2012). The Bearing Capacity of Circular Footings in Sand. Advances in Civil Engineering, 2012, Article 947276. https://doi.org/10.1155/2012/947276

Clausen, J. (Ed.) (2011). 3rd Semester and Master’s Thesis Ideas 2011: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (2007). Efficient Finite Element Calculation of Nγ.

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J., Finn, M. & Mattner, T. (2008). Delamination of Compressed thin Layers at Corners. International Congress of Theoretical and Applied Mechanics.

Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J. (Ed.), Finn, M. (Ed.) & Mattner, T. (Ed.) (2008). Delamination of Compressed thin Layers at Corners.

Clausen, J., Krabbenhoft, K., Schrefler, B. A. (Ed.) & Perego, U. (Ed.) (2008). Existence and Uniqueness of Solutions in Nonassociated Mohr-coulomb Elastoplasticity. https://www.researchgate.net/publication/238706804_Existence_and_uniqueness_of_solutions_in_nonassociated_Mohr-Coulomb_elastoplasticity

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (Ed.) (2007). Efficient Finite Element Calculation of Ny . Civil-Comp Press.

Clausen, J. (2007). Efficient Non-Linear Finite Element Implementation of Elasto-Plasticity for Geotechnical Problems. Esbjerg Institute of Technology, Aalborg University. https://www.semanticscholar.org/paper/Efficient-Non-Linear-Finite-Element-Implementation-Clausen/0b7b50d1e1fbff07b31982ec086d9621c1001c22

Clausen, J. C., Damkilde, L., Dahlblom, O. (Ed.), Fuchs, L. (Ed.), Persson, K. (Ed.), Ristinmaa, M. (Ed.), Sandberg, G. & Svensson, I. (2006). A Simple And Efficient FEM-Implementation Of The Modified Mohr-Coulomb Criterion. Lund Universitet. https://www.semanticscholar.org/paper/A-Simple-And-Efficient-FEM-Implementation-Of-The-Clausen-Damkilde/a87c59800833162b6053e17f4c0142c6548e2d00

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Clausen, J., Damkilde, L., Paavola, J. (Ed.) & Freund, J. (Ed.) (2005). Slope Safety Calculation With A Non-Linear Mohr Criterion Using Finite Element Method. Finnish Association for Structural Mechanics.

Clausen, J. (2010). M.Sc. in Civil and Structural Engineering: 3rd Semester and Master’s Thesis Ideas 2010. Department of Civil Engineering, Aalborg University. DCE Latest News No. 15

Clausen, J. (2009). 3rd Semester and Master's Thesis Ideas: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 9

Clausen, J. & Sørensen, E. V. (2010). Simulation of Thermally Induced Stress during Hardening of Large Concrete Cubes. Department of Civil Engineering, Aalborg University. DCE Contract Reports No. 74

Clausen, J. & Damkilde, L. (2007). An Exact Implementation Of The Hoek–Brown Criterion For Elasto-Plastic Finite Element Calculations. International Journal of Rock Mechanics and Mining Sciences, 45(6), 831-847. https://doi.org/10.1016/j.ijrmms.2007.10.004

Clausen, J. C. (Ed.) (2017). Third Semester and Master’s Thesis Ideas 2017: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 53

Andersen, T. L. & Clausen, J. C. (Eds.) (2018). Third Semester and Master’s Thesis Ideas 2018: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 57

Clausen, J. C. (Ed.) (2019). Third Semester and Master’s Thesis Ideas 2019: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News No. 58

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2017). Comparison of numerical formulations for the modeling of tensile loaded suction buckets. Computers and Geotechnics, 83, 198-208. https://doi.org/10.1016/j.compgeo.2016.10.026

Tarpø, M., Friis, T., Olsen, P., Juul, M., Georgakis, C. & Brincker, R. (2019). Automated reduction of statistical errors in the estimated correlation function matrix for operational modal analysis. Mechanical Systems and Signal Processing, 132, 790-805. https://doi.org/10.1016/j.ymssp.2019.07.024

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). The effect of modal truncation and spatial distribution in load identification. In S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (Eds.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (pp. 553-557). International Operational Modal Analysis Conference (IOMAC). https://www.researchgate.net/publication/331319800_The_effect_of_modal_truncation_and_spatial_distribution_in_load_identification

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). Identifying Wave Loads During Random Seas Using Structural Response. In Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019 (pp. 2673-2678). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331249021_Identifying_Wave_Loads_During_Random_Seas_Using_Structural_Response

Kabel, T., Georgakis, C. T. & Rod Zeeberg, A. (2019). Mapping Ocean Waves using New LIDAR Equipment. In Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference (pp. 2558-2562). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331345622_Mapping_Ocean_Waves_using_LIDAR_Technology

Persson, P., Kallivokas, L., Andersen, L. V. & T. Peplow, A. (2019). How building adjacency affects occupant-perceivable vibrations due to urban sources: A parametric study. In M. Papadrakakis & M. Fragiadakis (Eds.), Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Vol. 3, pp. 5610-5621). National Technical University of Athens. https://doi.org/10.7712/120119.7331.18833

Andersen, L. V., T. Peplow, A. & Persson, P. (2019). Mitigation of ground vibrations by circular arrays of rigid blocks. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Vol. 2, pp. 3422-3447). National Technical University of Athens. https://doi.org/10.7712/120119.7157.18943

T. Peplow, A., Andersen, L. V. & Persson, P. (2019). Computation of axisymmetric vibration transmission using a well-conditioned system for elastic layers over a half–space. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Vol. 2, pp. 4548-4556). National Technical University of Athens. https://doi.org/10.7712/120119.7248.18695

Tarpø, M. G., Silva Nabuco, B., Georgakis, C. T. & Brincker, R. (2019). The Effect of Operational Modal Analysis in Strain Estimation using the Modal Expansion. 699-705. Paper presented at International Operational Modal Analysis Conference 2019, København, Denmark.

Maienza, C., Avossa, A. M., Ricciardelli, F., Scherillo, F. & Georgakis, C. T. (2019). A Comparative Analysis of Construction Costs of Onshore and Shallow- and Deep-Water Offshore Wind Farms. In F. Ricciardelli & A. M. Avossa (Eds.), Proceedings of the XV Conference of the Italian Association for Wind Engineering (pp. 440-453). Springer. https://doi.org/10.1007/978-3-030-12815-9_35

Caterino, N., Georgakis, C. T., Spizzuoco, M. & Chen, J. (2019). Mitigation of Structural Demand to Wind Turbines: Experimental Investigation of Three Control Strategies. In F. Ricciardelli & A. M. Avossa (Eds.), Proceedings of the XV Conference of the Italian Association for Wind Engineering (pp. 165-178). Springer. https://doi.org/10.1007/978-3-030-12815-9_14

Sørensen, K. K. & Rezei, M. (2019). Influence of structure on the compression behaviour of two very stiff fissured high plasticity Eocene clays. In 7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019 (Vol. 92). Article 05003 EDP Sciences. https://doi.org/10.1051/e3sconf/20199205003

Lodahl, M. R. & Sørensen, K. K. (2019). Effects of pore water chemistry on the unloading-reloading behaviour of reconstituted clays. In 17th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2019 - Proceedings International Society for Soil Mechanics and Geotechnical Engineering. https://doi.org/10.32075/17ECSMGE-2019-0143

D. Pedersen, B., Hoerlykke, T. & Sørensen, K. K. (2019). Influence of pre-augering on ground surface displacements around driven piles in clay. Paper presented at 17th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE) , Reykjavik, Iceland. https://doi.org/10.32075/17ECSMGE-2019-0416

Burlina, C., Georgakis, C. T., Larsen, S. V. & Egger, P. (2018). Aerodynamics and rain rivulet suppression of bridge cables with concave fillets. Wind and Structures, An International Journal, 26(4), 253-266. https://doi.org/10.12989/was.2018.26.4.253

Jull, M. O. O., Amador, S. D. R., Skafte, A., Hansen, J. B., Aenlle, M. L. & Brincker, R. (2019). One-Step FE Model Updating Using Local Correspondence and Mode Shape Orthogonality. Shock and Vibration, 2019, Article 1362954. https://doi.org/10.1155/2019/1362954

Camargo, E. A., Ulfkjaer, J. P., Brincker, R., Nøergaard, J. & Gadegaard, S. S. (2019). Operational Modal Analysis and Finite-Element Model Updating of Pilot Concrete Wind Turbine Tower. Journal of Structural Engineering (United States), 145(2), Article 05018003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002242

Bucinskas, P. & Andersen, L. V. (2018). Effects of railway track modelling to surrounding soil and structure excitation. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling (Vol. 7, pp. 4148-4155). The International Institute of Acoustics and Vibration (IIAV).

Rajasingam, A., Kirkegaard, P. H. & Andersen, L. V. (2018). Bending – Active Structures Modelling, Behavior and Stiffness Analysis. In C. Mueller & S. Adriaenssens (Eds.), Proceedings of the IASS Symposium 2018: Creativity in Structural Design The International Association for Shell and Spacial Structures. https://www.ingentaconnect.com/content/iass/piass/2018/00002018/00000015/art00009

F. Ø. Jensen, S., Andersen, L. V., R. Pedersen, R. & Bjerre Nielsen, M. (2018). Multi-Level Design of Tubular Joints. In ASME 2018 1st International Offshore Wind Technical Conference, IOWTC 2018: Proceedings Article IOWTC2018-1015, V001T01A041 American Society of Mechanical Engineers. https://doi.org/10.1115/IOWTC2018-1015

Simonsen, T. R. & Sørensen, K. K. (2018). Performance Of Vibrating Wire Piezometers In Very Low Permeable Clay. Paper presented at 10th International Symposium On Field Measurements In Geomechanics, Rio de Janeiro, Brazil. https://www.issmge.org/uploads/publications/80/81/S35-Simonsen.pdf

Displaying results 251 to 300 out of 612

Back to the main page

Revised 09.01.2026

AU Engineering