Publications by Structural Dynamics and Geotechnical Engineering

Are you looking for publications by the Section of Structural Dynamics and Geotechnical Engineering? On this page you can find all the publications made by the Section of Structural Dynamics and Geotechnical Engineering by Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Luongo, D., Franza, A., Nicodemo, G., Prada-Sarmiento, L. F., Ferlisi, S., Gullà, G. & Peduto, D. (2026). Greenfield Finite Element Modelling for Damage Assessment of Axially Rigid Buildings Under Groundwater-Driven Slope Movements. I IAEG 2026: Engineering Geology in a Rapidly Changing World - XV IAEG World Congress TU Delft OPEN Publishing. https://doi.org/10.59490/6ad293e51111c11e2bf48062

Sobhani, R. & Istrati, D. (2026). Solitary wave runup on coastal cliffs with basal notches: High-fidelity simulations and new predictive equations. Ocean Engineering, 369, Artikel 128416. https://doi.org/10.1016/j.oceaneng.2026.128416

Modé, P., Alexopoulos, M. J., Sobhani, R., Spyrakos, C. & Istrati, D. (2026). Probabilistic tsunami risk assessment of cultural heritage in the Mediterranean Sea based on GIS and advanced computational models. Frontiers in Built Environment, 12, Artikel 1778867. https://doi.org/10.3389/fbuil.2026.1778867

Li, J. & Andersen, L. V. (2026). Stress-Driven Timber Floor Slabs with Segmented Ribs from Reclaimed Engineered Wood Off-Cuts. I A. Zingoni (red.), Advances in Structural Engineering: Mechanics and Design (1st udg., s. 246-252). CRC Press. https://doi.org/10.1201/9781003797012

Mangliar, L. & Andersen, L. V. (2026). A Hierarchical Structural Documentation Framework for Modular Timber Structures Using Substructuring. I A. Zingoni (red.), Advances in Structural Engineering: Mechanics and Design CRC Press. https://doi.org/10.1201/9781003797012-40

Mangliar, L. & Andersen, L. V. (2026). Partitioning modular timber structures into substructure components toward component based structural documentation. I M. Schweigler (red.), Timber Engineering - Nordic PhD symposium, 2026, Book of Abstracts (s. 27-28). Linnaeus University Press.

Mangliár, L. & Hudert, M. (2026). Upcycling CLT production waste: a computational design and fabrication framework and a proof-of-concept demonstrator. Frontiers in Built Environment, 12, Artikel 1819177. https://doi.org/10.3389/fbuil.2026.1819177

Feliziani, F., Marmoni, G. M., Montagnese, M., Sobhani, R., Istrati, D., Eberhardt, E. & Martino, S. (2026). Numerical modelling of static and dynamic factors controlling the progressive retreat of rocky coastal cliffs. Landslides, 23(10), 2909-2931. https://doi.org/10.1007/s10346-026-02800-2

Rosso, M. M., Aloisio, A., Cucuzza, R., Marano, G. C. & Alaggio, R. (2023). Train-Track-Bridge Interaction Analytical Model with Non-proportional Damping: Sensitivity Analysis and Experimental Validation. I P. Rizzo & A. Milazzo (red.), European Workshop on Structural Health Monitoring, EWSHM 2022, Volume 1 (s. 223-232). Springer Science+Business Media. https://doi.org/10.1007/978-3-031-07254-3_22

Rosso, M. M., Aloisio, A., Cirrincione, G. & Marano, G. C. (2023). Subspace features and statistical indicators for neural network-based damage detection. Structures, 56, Artikel 104792. https://doi.org/10.1016/j.istruc.2023.06.123

Marasco, G., Rosso, M. M., Aiello, S., Aloisio, A., Cirrincione, G., Chiaia, B. & Marano, G. C. (2022). Ground Penetrating Radar Fourier Pre-processing for Deep Learning Tunnel Defects’ Automated Classification. I L. Iliadis, C. Jayne, A. Tefas & E. Pimenidis (red.), Engineering Applications of Neural Networks - 23rd International Conference, EAAAI/EANN 2022, Proceedings (s. 165-176). Springer Science+Business Media. https://doi.org/10.1007/978-3-031-08223-8_14

Aloisio, A., Rosso, M. M., De Leo, A. M., Fragiacomo, M. & Basi, M. (2023). Damage classification after the 2009 L'Aquila earthquake using multinomial logistic regression and neural networks. International Journal of Disaster Risk Reduction, 96, Artikel 103959. https://doi.org/10.1016/j.ijdrr.2023.103959

Albæk , P. V., Rosleff , S. V., Hernandez-Guardado, A., Zhao, J. & Franza, A. (2026). A modification factor approach for limiting tensile strain: deterministic and probabilistic analyses of tunnelling-induced building response. I Prediction and Performance in Geotechnical Engineering – Proceedings of the 9th Italian National Conference of the Researchers of Geotechnical Engineering CNRIG 2026 (s. 300) https://doi.org/10.1007/978-3-032-30096-6_31

Kilian, J., Mangliar, L., D’Arenzo, G., Belladelli, L. & Hudert, M. (2026). Timber joinery revisited: design and experimental testing of a mono-material timber joint for multi-story buildings. Architecture, Structures and Construction, 6, Artikel 28. https://doi.org/10.1007/s44150-026-00201-6

Ramos-Cañón, A., Prada-Sarmiento, L. F., Munévar-Peña, M. & Castro-Malaver, C. (2026). DESEMPEÑO TÉCNICO DEL SISTEMA DE ALERTA TEMPRANA PARA AVENIDAS TORRENCIALES EN MOCOA, COLOMBIA. Revista de Estudios Latinoamericanos sobre Reduccion del Riesgo de Desastres, 10(2), 301-312. https://doi.org/10.55467/reder.v10i2.234

Fogh, L., Franza, A., Prada-Sarmiento, L. F., Martinez, A. & Andersen, L. V. (2026). Design of geotechnical centrifuge experiments for grouped anchor systems in four steps. Afhandling præsenteret på ASME 2026 45th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2026), Tokyo. https://doi.org/10.1115/OMAE2026-176024

Bjerge, N. B., Franza, A., Abbiati, G., Prada-Sarmiento, L. F., Nielsen, S. D., Sørensen, S. P. H. & Andersen, L. V. (2026). Anchor load sensitivity to foundation stiffness in mooring systems for floating wind turbines: a geotechnical design workflow for suction caissons. Afhandling præsenteret på Proceedings of the ASME 2026 45th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2026), Tokyo. https://doi.org/10.1115/OMAE2026-180338

Siviero, M., Melchiorre, J., Rosso, M. M., Cirrincione, G. & Marano, G. C. (2026). A multi-objective Gaussian mixture-based estimation of distribution algorithm for structural design optimization. Applied Soft Computing, 201, Artikel 115610. https://doi.org/10.1016/j.asoc.2026.115610

Fogh, L., Franza, A., Prada-Sarmiento, L. F. & Andersen, L. V. (2026). A novel grouped caisson-plate system for offshore anchoring: Finite element analyses. Afhandling præsenteret på 21st ICSMGE, Vienna. https://doi.org/10.53243/ICSMGE2026-1190

Hernandez-Guardado, A., Franza, A., Reale, D., Nicodemo, G., Peduto, D. & Petrella, F. (2026). MT-InSAR monitoring of deep excavations: a feasibility study of analytical kinematic constraints to assess three-dimensional surface movements. Afhandling præsenteret på 21st ICSMGE, Vienna. https://doi.org/10.53243/ICSMGE2026-820

Alexopoulos, M. J., Iliopoulou, T., Modé, P., Spyrakos, C. C. & Istrati, D. (2026). An integrated framework for pluvial flood and tsunami hazard assessment at coastal sites: application to cultural heritage. Environmental Research Communications, 8(5), 1-28. Artikel 055055. https://doi.org/10.1088/2515-7620/ae6ec4

K. L. Wong, E., Franza, A., Peter , H. & Viggiani, G. M. B. (2026). An assessment methodology for tunnelling beneath bridges considering soil–structure interaction. Tunnelling and Underground Space Technology Journal, 176, Artikel 107810. https://doi.org/10.1016/j.tust.2026.107810

Kristoffersen, J. C., Kabel, T., Georgakis, C. T., Bellos, V. & Karmpadakis, I. (2026). Spatio-temporal measurement of laboratory wave fields using LiDAR. Coastal Engineering, 209, Artikel 105047. https://doi.org/10.1016/j.coastaleng.2026.105047

Canales-Brenlla, L., Koch, F., Tafili, M., Prada-Sarmiento, L. F. & Wichtmann, T. (2026). Mechanical behaviour of Australian superfine silica sand: from monotonic to high-cyclic loading. Acta Geotechnica, 21(8), 5169-5189. https://doi.org/10.1007/s11440-026-02969-9

Quinteros, S., Dyvik, R., Peikli, I., Silva, D. C. A., Seiphoori, A., Westgate, Z., Kidane, M., Zepilli, D., Sørensen, K. K., Song, S., Uday, A., Cudmani, R., Gebremeskel, B. M., Stutz, H. H., Franco, A. & Chen, Z. (2026). Interface Friction Angle from Ring Shear Tests on Sand: A Round Robin. Journal of Geotechnical and Geoenvironmental Engineering - ASCE, 152(6), Artikel 04026024. https://doi.org/10.1061/JGGEFK.GTENG-13628

Li, J. K. (2026). Circular Timber Construction by System-level Modularity and Component-level Optimisation. [Ph.d.-afhandling, Aarhus Universitet].

Kristoffersen, J. C., Kabel, T., Georgakis, C. T. & Karmpadakis, I. (2025). Accurate Spatio-Temporal Measurements of Extreme Waves Using LiDAR in the Laboratory. I Proceedings of the ASME 2025 44th International Conference on Ocean, Offshore and Arctic Engineering. : Volume 3: Ocean Engineering; Polar and Arctic Sciences and Technology Artikel v003t06a038 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/OMAE2025-156743

Wei, J., Narazaki, Y., Quaranta, G., Yang, Q., Georgakis, C. T. & Demartino, C. (2025). Wind profile nowcasting and forecasting using machine learning. Journal of Wind Engineering and Industrial Aerodynamics, 266, Artikel 106162. https://doi.org/10.1016/j.jweia.2025.106162

Shen, C., Zhang, D., Xu, J., Shen, C., Zhang, D., Clausen, J., Song, T. & Zhang, C. (2026). Failure Characteristics of a River Embankment on Soft Ground Improved with Combined Columnar and Grid-Form Deep-Mixed Columns: Three-Dimensional Centrifuge and Numerical Modeling. International Journal of Geomechanics, 26(1), Artikel 05025013. https://doi.org/10.1061/IJGNAI.GMENG-11816

Ung, K. A., Bohman, A., Andersson, L., Persson, P., Johansson, S. & Andersen, L. V. (2025). Vibration reduction in cross-laminated timber panels by using individual concrete lamellae. I Zingoni (red.), Engineering Materials, Structures, Systems and Methods for a More Sustainable Future (s. 72-77). CRC Press Inc.. https://doi.org/10.1201/9781003677895-12

Modé, P. D., Demartino, C., Lagaros, N. D. & Georgakis, C. T. (2025). Correlation between Predictability of Extreme Wind Speeds and Wind Directionality: A Preliminary Analysis. I N. D. Lagaros, R. Z. Alrousan, K. M. Abdalla, M. C. Phocas & G. C. Marano (red.), Proceedings of the International Conferences on Digital Technology Driven Engineering 2024 - 2nd International Conference on Optimization Driven Architectural Design, OPTARCH 2024 (s. 284-294). Springer. https://doi.org/10.1007/978-3-031-92754-6_27

Andersen, L. V., Christophersen, M. D., Nguyen, W. H., Hoffmann, M. K. & Damgaard, M. (2025). Modelling of monopile-based offshore wind turbines: Comparison of soil-structure interaction models accounting for hysteretic soil behaviour. I Zingoni (red.), Engineering Materials, Structures, Systems and Methods for a More Sustainable Future (s. 1261-1266). CRC Press. https://doi.org/10.1201/9781003677895-212

Andersen, L. V., Alibrandi, U., Geessink, M. & Mikkelsen, A. B. (2025). A hierarchical Bayesian approach to the geotechnical site assessment for offshore wind farms. I Engineering Materials, Structures, Systems and Methods for a More Sustainable Future (s. 1302-1307). CRC Press Inc.. https://doi.org/10.1201/9781003677895-219

Ung, K. A., Andersson, L., Persson, P., Rasmussen, F., Bucinskas, P., Andersen, L. V. & Kim, J. G. (2025). Train-induced vibrations in cross-laminated timber buildings: A parametric study. I Engineering Materials, Structures, Systems and Methods for a More Sustainable Future (s. 102-107s). CRC Press Inc.. https://doi.org/10.1201/9781003677895-17

Hovmand, M., Andersen, L. V. & Abbiati, G. (2021). REAL-TIME HYBRID SIMULATION WITH NONLINEAR NUMERICAL SUBSTRUCTURES BASED ON STATE-SPACE MODELING. I The 17th World Conference on Earthquake Engineering Artikel 2b-0204 International Association for Earthquake Engineering. https://wcee.nicee.org/wcee/article/17WCEE/2b-0204.pdf

Ruge, J. C., Molina-Gómez, F., Olarte, M. C., Camacho-Tauta, J., Reyes-Ortiz, O., Larrahondo, J. M., Vacca, H. A., Prada-Sarmiento, L. F., Ramos, A. M., Alvarado, Y., Reyes, F. J., Cabrera, M. A., Caicedo-Hormaza, B., Naranjo, J. S., Otálvaro, I. F., Gómez-Jiménez, A., Galvis, M. A., Carmona, J. E., García, C. A. ... Rojas, J. P. (2024). Inter-Laboratory Testing Program for the Physical Characterization of Guamo Sand. Ingenieria e Investigacion, 44(3), Artikel e113488. https://doi.org/10.15446/ing.investig.113488

Brown, F., Villalobos, F. A. & Prada-Sarmiento, L. F. (2026). Yield surface coefficients for different foundation embedment and soil drained shear strengths using genetic and neural network analyses. Transportation Geotechnics, 57, Artikel 101843. https://doi.org/10.1016/j.trgeo.2025.101843

Franza, A., Ali, A. G. J. & Ehlers, S. B. (2025). Semi-analytical model for three-dimensional tunnelling-induced movements in undrained soil. Abstract fra ECCOMAS Thematic Conference on Computational Methods and Information Models in Tunneling , Vienna.

Klar, A., Franza, A., von Solms, N., Lev Yehudi, O., Minh Tang, A., Llabjani, Q., Dalmazzone, D. & Laloui, L. (2025). Required Research Steps Towards the Realization of CO2-Hydrate Geo-Capsules for Underground Mechanical Energy Storage. https://hal.science/hal-05344043/

Franza, A., Sørensen, K. K. & Stutz, H. H. (2025). Pumped underground hydroelectric energy storage system in sand: an overview of the field trials in Foulum, Denmark. Abstract fra 3rd International Conference on Energy Geotechnics 2025, Paris. https://hal.science/hal-05344040

Franza, A. & Sorrentino, G. (2025). Experimental study of sugar-induced sand cementation in dry conditions. Geomechanics for Energy and the Environment, 44, Artikel 100765. https://doi.org/10.1016/j.gete.2025.100765

Lev Yehudi, O., Ouyang, Q., Franza, A., von Solms, N. & Klar, A. (2026). Underground energy storage using man-made CO2 hydrate geo-capsules. Tunnelling and Underground Space Technology Journal, 168(Part 2), Artikel 107203. https://doi.org/10.1016/j.tust.2025.107203

Tao, L., Huang, L., Zhao, X., Clausen, J., Zhang, Q., Jiao, B. & Zhu, H. (2025). An exact implementation of the generalized Zhang-Zhu criterion for elasto-plastic finite element calculations. Journal of Rock Mechanics and Geotechnical Engineering, 17(7), 4527-4538. https://doi.org/10.1016/j.jrmge.2024.09.043

Clausen, J., Andersen, L. & Damkilde, L. (2009). Three-dimensional elasto-plastic calculations using yield surfaceswith corner discontinuities. I Computational Plasticity X - Fundamentals and Applications

Peng, Y., Chang, T., Yue, J., Zhang, Z. & Andersen, L. V. (2025). Semiactive Control and Reliability Analysis for Vibration Mitigation of Spar-Type Floating Offshore Wind Turbines under Stochastic Wind and Waves. Journal of Engineering Mechanics - ASCE, 151(11), Artikel 04025060. https://doi.org/10.1061/JENMDT.EMENG-8400

Cáceres, M., Villalobos, F. A., Prada-Sarmiento, L. F., Fumeron, J. & Moffat, R. (2025). 3D Numerical Modeling of DMT Penetration and Membrane Expansion in Sand. International Journal of Geomechanics, 25(10), Artikel 04025222. https://doi.org/10.1061/IJGNAI.GMENG-10435

Li, J. K., Bak, A. K., Mangliár, L., Hudert, M. M. & Andersen, L. V. (2025). Effect of design configuration on global stiffness of volumetric timber modules. I K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (red.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (s. 3175-3184). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0387

Li, J. K., Andersen, L. V. & Hudert, M. M. (2025). Circular design for urban densification through extension construction. I K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (red.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (s. 2403-2411). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0293

Tsai, M. H., Tsai, C. C., Hung, W. Y., Prada-Sarmiento, L. F. & Wichtmann, T. (2025). Centrifuge modeling and p-y curve characterization of large-diameter monopile embedded in low-plasticity soft clay under monotonic and long-term horizontal cyclic loading. Ocean Engineering, 338, Artikel 121970. https://doi.org/10.1016/j.oceaneng.2025.121970

Escobar-Castañeda, N., Ramos-Cañon, A. M., Prada-Sarmiento, L. F. & Osorio, J. D. G. (2021). Statistical analysis of morphometric variables for basins associated with debris flow events in Colombia: a comparison within types of flows and with non-susceptible basins. Afhandling præsenteret på 13th Landslides and Engineered Slopes. Experience, Theory and Practice, ISL, Virtual, Online, Colombia.

Viser resultater 1 til 50 ud af 631

Næste

Back to the main page

Revideret 13.11.2025

AU Engineering