Publications

Under publication list you can find a complete list of the publications that are written by employees at the Publications at Department of Civil and Architectural Engineering for example journal articles, books, reports etc.

Under PhD dissertations you will find the department's published PhD dissertations.

Publication list

Sort by: Date | Author | Title

Osterhaus, W., Gkaintatzi-Masouti, M. & Gentile, N. (2020). Wearable Light Sensors in Case Study Evaluations. Webinar of the International Solar Energy Society. Paper presented at Webinar of the International Solar Energy Society (ISES) and the International Energy Agency (IEA) SHC Task 61 – Integrated Solutions for Daylighting and Electric Lighting.

Osterhaus, W., Erhardtsen, I. & Fodor, K. E. (2019). Applying the New European Daylight Standard to Enhance Daylight Quality in Dense Urban Environments. Poster session presented at 8th VELUX International Daylighting Symposium, Paris, France.

Jensen, S. R., Kirkegaard, P. H., Postiglione, G. & Strange, A. (2019). A tectonic aproach to energy renovation of dwellings: the case of Gellerup. In P. J. S. Cruz (Ed.), Structures and architecture: bridging the gap and crossing borders (pp. 99-108). CRC Press. https://books.google.dk/books?id=mQSiDwAAQBAJ&pg=PA99&dq=%22A+tectonic+approach+to+energy+renovation+of+dwellings+-+The+case+of+Gellerup%22&hl=da&sa=X&ved=0ahUKEwiV5sToye7mAhVRLFAKHaE5CzgQ6AEIJzAA#v=onepage&q=%22A%20tectonic%20approach%20to%20energy%20renovation%20of%20dwellings%20-%20The%20case%20of%20Gellerup%22&f=false

Harichandran, A. (2019). Automated Top-down Construction. Abstract from Smart Materials, Smart Construction, Smart Structures Workshop, Perth, Australia.

Harichandran, A. (2019). Determination of Automated Construction Operations from Sensor Data Using Machine Learning. In 4th International Conference on Civil and Building Engineering Informatics (ICCBEI 2019) https://www.academia.edu/41057396/Determination_of_Automated_Construction_Operations_from_Sensor_Data_Using_Machine_Learning

Wang, J. (2019). Effect investigation of nanofillers on C-S-H gel structure with Si NMR. Invitation report.

Gentile, N., Osterhaus, W., Altomonte, S., Garcia Alvarez, M., Garcia-Hansen, V., Amorim, C. N. D. & Obradovic, B. (2019). Energy-Saving Potential for Integrated Daylighting and Lighting Design via User-Driven Solutions: A Literature Review. In Proceedings of the 29th CIE SESSION : CIE x046:2019 (Vol. 1, pp. 205-215). CIE. https://doi.org/10.25039/x46.2019.OP32

Gres, S., Döhler, M., Andersen, P., Damkilde, L. & Mevel, L. (2019). Hankel matrix normalization for robust damage detection. In S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (Eds.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (pp. 147-154). International Operational Modal Analysis Conference (IOMAC).

Yu, X., Georges, L., Knudsen, M. D., Sartori, I. & Imsland, L. (2019). Investigation of the model structure for low-order grey-box modelling of residential buildings. In V. Corrado, E. Fabrizio, A. Gasparella & F. Patuzzi (Eds.), 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019 (pp. 5076-5083). International Building Performance Simulation Association.

Osterhaus, W., Gentile, N., Garcia Alvarez, M., Amorim, C. N. D. & Altomonte, S. (2019). Lighting designers improve lighting energy performance through user-centred lighting design. In J. Ritter (Ed.), Proceedings of the 8th Professional Lighting Design Convention (PLDC 2019) VIA-VERLAG. https://2019.pld-c.com/werner-osterhaus/

Gres, S., Andersen, P. & Damkilde, L. (2019). Operational Modal Analysis of Rotating Machinery. In D. Di Maio (Ed.), Rotating Machinery, Vibro-Acoustics and Laser Vibrometry, Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (pp. 67-75). Springer Science and Business Media, LLC. https://doi.org/10.1007/978-3-319-74693-7_7

Gres, S., Andersen, P., Hoen, C. & Damkilde, L. (2019). Orthogonal projection-based harmonic signal removal for operational modal analysis. In C. Niezrecki & J. Baqersad (Eds.), Structural Health Monitoring, Photogrammetry and DIC, Volume 6 - Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (pp. 9-21). Springer Science and Business Media, LLC. https://doi.org/10.1007/978-3-319-74476-6_2

Kristoffersen, J. C., Bredmose, H., Georgakis, C. T. & Tao, L. (2019). Preliminary Experimental Study on the Influence of the Local Wind Field on Forces From Breaking Waves on a Circular Cylinder. In Ocean Engineering: Volume 7B: Ocean Engineering Article OMAE2019-95179, V07BT06A017 American Society of Mechanical Engineers. https://doi.org/10.1115/OMAE2019-95179

Berit Time, Alessandro Nocente, Mathisen, H. M. & Førland-Larsen, A. (2019). Research possibilities in the Norwegian ZEB Laboratory. The REHVA Europen HVAC Journal, 06(2019), 83. Article Rehva Journal 06/2019.

Wandahl, S., Lund, L., Neve, H. H. & Jensen, S. R. (2019). Social Sustainability in Modelling of Value Creation in Housing Refurbishment. In I. Lill & E. Witt (Eds.), 10th Nordic Conference on Construction Economics and Organization (pp. 383-391). Emerald Group Publishing. https://doi.org/10.1108/S2516-285320190000002024

Gres, S., Döhler, M., Andersen, P. & Meve, L. (2019). Variance computation of MAC and MPC for real-valued mode shapes from the stabilization diagram. In S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (Eds.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (pp. 525-533). International Operational Modal Analysis Conference (IOMAC).

Petersen, S., Bøving, A., Nielsen, C. & Purup, P. B. (2018). Integration of Thermal Simulations in REVIT for Decision Support and National Building Code Compliance. In Proceedings of BSO 2018: 4th Building Simulation and Optimization Conference (pp. 407-413). Article 4B-4 International Building Performance Simulation Association. http://www.ibpsa.org/proceedings/BSO2018/4B-4.pdf

Petersen, S., Broholt, T. H., Christensen, L. & Purup, P. B. (2018). Thermal Performance Simulation of Complex Fenestration Systems in the Early Design Stage. In Proceedings of BSO 2018: 4th Building Simulation and Optimization Conference (pp. 573-580). Article 6A-1 International Building Performance Simulation Association. http://www.ibpsa.org/proceedings/BSO2018/6A-1.pdf

Purup, P. B. & Petersen, S. (2016). Simulation of Natural Ventilation in the Early Design of Near Zero Energy Buildings. In P. Kvols Heiselberg (Ed.), CLIMA 2016 - Proceedings of the 12th REHVA World Congress (Vol. 5). Article 581 Aalborg Universitet. http://vbn.aau.dk/files/233760256/paper_581.pdf

Shams-Hakimi, P., Yildirim, H. C. & Al-Emrani, M. (2016). Size effect on the fatigue of high frequency mechanical impact treated welds. In IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment (pp. 307-314). International Association for Bridge and Structural Engineering.

Lauridsen, P. K. B., Petersen, S. & Purup, P. B. (2014). Integrating indoor climate, daylight and energy simulations in parametric models and performance-based design. In L. Bjerregaard Jensen & M. K. Thompson (Eds.), Proceedings of the Third International Workshop on Design in Civil and Environmental Engineering (pp. 111-118) https://www.researchgate.net/publication/269332864_Integrating_Indoor_Climate_Daylight_and_Energy_Simulations_in_Parametric_Models_and_Performance-Based_Design

Ulriksen, M. D., Skov, J. F., Dickow, K. A., Kirkegaard, P. H. & Damkilde, L. (2013). Modal analysis for crack detection in small wind turbine blades. Key Engineering Materials, 569-570, 603-610. https://doi.org/10.4028/www.scientific.net/KEM.569-570.603

Skov, J. F., Ulriksen, M. D., Dickow, K. A., Kirkegaard, P. H. & Damkilde, L. (2013). On Structural Health Monitoring of Wind Turbine Blades. Key Engineering Materials, 569-570, 628-635. https://doi.org/10.4028/www.scientific.net/KEM.569-570.628

Dickow, K. A., Domadiya, P. G., Andersen, L. V. & Kirkegaard, P. H. (2011). A Parameter Study of Coupling Properties in Finite Element Models of Single-Stud Double-Plate Panels. In Congress Program and Abstracts inter-noise 2010: 40th international congress and exposition on noise control engineering "Sound Environment as a Global Issue" (pp. 294). The Institute of Noise Control Engineering of Japan (NCE/J).

Sorensen, K. K., Baudet, B. A. & Simpson, B. (2011). Influence of structure on the time-dependent behaviour of a stiff sedimentary clay. In Stiff Sedimentary Clays: Genesis and Engineering Behaviour - Geotechnique Symposium in Print 2007 (pp. 111-122) https://doi.org/10.1680/ssc.41080.0010

Ye, Z., Zhang, G., Li, B., Strøm, J. S. & Dahl, P. J. (2008). Ammonia emissions affected by airflow in a model pig house: effects of ventilation rate, floor slat opening, and headspace height in a manure storage pit. American Society of Agricultural and Biological Engineers. Transactions, 51(6), 2113-2122. http://asae.frymulti.com/abstract.asp?aid=25393&t=1

Bjerg, B., Zhang, G. & Kai, P. (2008). CFD Investigation of a Partly Pit Ventilation System as Method to Reduces Ammonia Emission from Pig Production Units. In Proceedings of the Eighth International Livestock Symposium ILES8. https://www.academia.edu/30198136/CFD_Investigation_of_a_Partly_Pit_Ventilation_System_as_Method_to_Reduce_Ammonia_Emission_from_Pig_Production_Units

Wang, C. Y., Li, B. M., Zhang, G., Rom, H. B. & Shi, Z. X. (2008). Comparison between the statistical method and the artificial neural networks in estimating ammonia emissions from naturally ventilated dairy cattle buildings. In Proceedings of the Eighth International Livestock Symposium ILES8.

Rong, L., Nielsen, P. V., Tong, G., Ravn, P. & Zhang, G. (2008). Computational fluid dynamics study on the influence of airflow patterns on carbon dioxide distribution in a scaled livestock building. In AgEng 2008 - International Conference on Agricultural Engineering: Agricultural & Biosystems Engineering for a Sustainable World. Book of Abstracts (pp. 34). EurAgEng.

Rong, L., Nielsen, P. V., Tong, G., Ravn, P. & Zhang, G. (2008). Computational fluid dynamics study on the influence of airflow patterns on carbon dioxide distribution in a scaled livestock building. In Agricultural & Biosystems Engineering for a Sustainable World https://www.researchgate.net/publication/242457390_COMPUTATIONAL_FLUID_DYNAMICS_STUDY_ON_THE_INFLUENCE_OF_AIRFLOW_PATTERNS_ON_CARBON_DIOXIDE_DISTRIBUTION_IN_A_SCALED_LIVESTOCK_BUILDING

Zhang, G., Tong, G., Ravn, P., Rong, L. & Nielsen, P. V. (2008). Effect of environmental deflector on air exchange in slurry pit and concentration distribution in a two-dimensional ventilation chamber. In AgEng 2008 - International Conference on Agricultural Engineering: Agricultural & Biosystems Engineering for a Sustainable World. Book of Abstracts (pp. 15). EurAgEng.

Tong, G., Zhang, G., Ravn, P., Rong, L. & Nielsen, P. V. (2008). Effect of environmental deflector on air exchange in slurry pit and concentration distribution in a two-dimensional ventilation chamber. In Agricultural & Biosystems Engineering for a Sustainable World https://www.researchgate.net/publication/239576374_EFFECT_OF_ENVIRONMENTAL_DEFLECTOR_ON_AIR_EXCHANGE_IN_SLURRY_PIT_AND_CONCENTRATION_DISTRIBUTION_IN_A_TWO-DIMENSIONAL_VENTILATION_CHAMBER

Bejder, A. K., Kirkegaard, P. H., Brohus, H. & Fisker, A. M. (2008). MCDM In Practice: an architectural point of view. In Passivhus Norden 2008 Conference Proceedings: Den første nordiske passivhuskonferanse (pp. 134-143). SINTEF.

Petersen, S. (2008). Method for including detailed evaluation of daylight levels in Be06. In Proceedings of the 8th symposium of building physics in the nordic countries (Vol. 3). Danish Society of Engineers.

Petersen, S. & Svendsen, S. (2008). Method for integrated design of low energy buildings with high quality indoor environment. In Proceedings of the 8th symposium of building physics in the nordic countries (Vol. 2, pp. 597 -604 ). Danish Society of Engineers. https://zenodo.org/record/3561377#.Yv9RFi7P270

Frier, M., Fisker, A. M. & Kirkegaard, P. H. (2008). The Interior as a Generator for the Future Nordic Industrialized House. In L. B. Peressut, I. Forino, G. Postiglione & F. Scullica (Eds.), Places & Themes of Interiors: Contemporary Research Worldwide (pp. 205-212). Edizioni FrancoAngeli.

Displaying results 501 to 536 out of 536

PhD dissertations

At the Department of Civil and Architectural Engineering, PhD dissertations are published via Aarhus University Library's/State and University Library's online E-books platform that is open access. You can find the published dissertations by following the link below.

PhD dissertations at the Department of Civil and Architectural Engineering

AU Engineering Profile

Download AU Engineering Profile 2013-2022:

Revised 18.09.2024

AU Engineering