Department of Civil and Architectural Engineering

Aarhus University Seal
 Department of Civil and Architectural Engineering About the department Sections - research and development Design & Construction Publications

Publications by Design & Construction

Are you looking for publications by the Section of Design & Construction? On this page you can find all the publications made by the Section of Design & Construction - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Al-Khiami, M. I., Lindhard, S. M. & Wandahl, S. (2024). Charting the Exoskeleton Industry: A Comprehensive Insight into Dynamics and Trends. In 12th Nordic Conference on Construction Economics and Organisation (1 ed., Vol. 1389) https://doi.org/10.1088/1755-1315/1389/1/012014
Martinez Ribon, J. G. T., F Alarcon, L. & Wandahl, S. (2024). Unmanned Aerial Systems (UAS)-Derived 3D Models for Digital Twin Construction Applications. In C. Şahin (Ed.), Applications of Point Cloud Technology InTechOpen. https://doi.org/10.5772/intechopen.1004746
Wandahl, S., Perez, C. T. & Salling, S. T. (2024). Construction Workers’ Perception of Project Management, Work Environment, and Health & Safety. In 12th Nordic Conference on Construction Economics and Organisation (1 ed., Vol. 1389) https://doi.org/10.1088/1755-1315/1389/1/012039
Pedersen, K. B., Stefankovics, G., Plamenov Nachev, S. & Wandahl, S. (2024). Quantifying and Planning Carbon Emissions in Construction With Location-Based Scheduling. In Proceedings of the 32nd Annual Conference of the International Group for Lean Construction (IGLC32) (Vol. 32, pp. 416–427) https://doi.org/10.24928/2024/0175
Perez, C. T., Salling, S. T. & Wandahl, S. (2023). Location-based Work Sampling. Lean Construction , 2023.
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Ringparken.
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Bartholin.
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Holbergshaven.
Perez, C. T., Wandahl, S. & Arieldsen, M. (2024). RELATIONSHIP BETWEEN TIME SPENT IN PRODUCTION WORK ACTIVITIES AND PRODUCTION WORKSPACES. In Proceedings of the 32nd Annual Conference of the international Group for Lean Construction (IGLC 32) (Vol. 32, pp. 454-465) https://doi.org/10.24928/2024/0189
Perez, C. T., Madushanka, M., Loyola, L., Ergul, M., Salling, S. T. & Wandahl, S. (2024). The impact of Lean Knowledge and Lean Operation on construction workers’ job satisfaction. In IGLC 32 - Auckland, New Zealand 2024 (Vol. 32, pp. 1195-1206) https://doi.org/10.24928/2024/0188
Sardenberg, V. & Hudert, M. (2024). Robotic positioning of wooden slats for optimized timber slabs. In M. Wessely, V. Savage, P. Didyk & J. Martinez (Eds.), SCF Adjunct '24: Adjunct Proceedings of the 9th ACM Symposium on Computational Fabrication Article 13 Association for Computing Machinery. https://doi.org/10.1145/3665662.3673260
Hudert, M., Lindemann, D., Mangliár, L. & Swann, A. (2024). Computing irregular hypar-based quad-mesh patterns for segmented timber shells. Computer-Aided Design, 177, Article 103772. https://doi.org/10.1016/j.cad.2024.103772
Rasmussen, M. K., Pakanen, M. & Heiselberg, K. (2024). A review of visual strategies in pictorials. In C&C 2024: Proceedings of the 16th Conference on Creativity & Cognition (pp. 211-228). Association for Computing Machinery. https://doi.org/10.1145/3635636.3656212
Rajanayagam, H., Beatini, V., Poologanathan, K. & Nagaratnam, B. (2024). Comprehensive evaluation of flat pack modular building systems: Design, structural performance, and operational efficiency. Journal of Building Engineering , 95, Article 110099. https://doi.org/10.1016/j.jobe.2024.110099
Fathollahi, A. & Beatini, V. (2024). Design and analysis of bending-active configurations through an initial flat-cut pattern based on the curvature lines. International Journal of Space Structures, 39(3), 145-156. https://doi.org/10.1177/09560599241249856
Yu, X., Georges, L., Knudsen, M. D., Sartori, I. & Imsland, L. (2019). Investigation of the model structure for low-order grey-box modelling of residential buildings. In V. Corrado, E. Fabrizio, A. Gasparella & F. Patuzzi (Eds.), 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019 (pp. 5076-5083). International Building Performance Simulation Association.
Volf, C., Bueno, B., Edwards, P., Hobday, R., Mäder, S., Matusiak, B. S., Wulff, K., Osterhaus, W., Manoli, G., Della Giustina, C., Joshi, J., Kämpf, J. H., Vega, K. & Kueffer, C. (2024). Why daylight should be a priority for urban planning. Journal of Urban Management, 13(2), 175-182. https://doi.org/10.1016/j.jum.2024.02.002
Hagsten, L. G. (2023). Required anchorage length of reinforcement in circular foundation subjec-ted by a centrally located normal force and supported by a uniformly distributed reaction. Bygningsstatiske Meddelelser, 93(2), 1-12. https://www.dssse.dk/wp-content/uploads/2024/03/DSSSE-foundation-no-3.pdf
Hagsten, L. G. (2023). Point Foundation. Lower Bound Solution for Distributed Load. Bygningsstatiske Meddelelser, 93(1). https://www.dssse.dk/wp-content/uploads/2024/01/DSSSE-foundation-no-2a.pdf
Hagsten, L. G., van Logtestijn, M. & Laustsen, H. H. (2022). Point foundation. Upper and lower bound solution for point load and upper bound solution for distributed load. Bygningsstatiske Meddelelser, 92(2), 1-13.
Hagsten, L. G., Fisker, J., Svarre, C. & Frandsen, T. (2022). On the influence of transverse reinforcement type and layout on the shear capacity of thin-weed concrete beams. Bygningsstatiske Meddelelser, 92(2), 15-29. Article 92-2.
Jacobsen, E. L., Teizer, J., Wandahl, S. & Brilakis, I. (2024). Probabilistic forecasting of construction labor productivity metrics. Journal of Information Technology in Construction, 24, 58-83. https://doi.org/10.36680/j.itcon.2024.004
Aita, D., Beatini, V., Garavaglia, E., Paris, V., Pizzigoni, A. & Sgambi, L. (2025). The roofing system of the tholos of Athena Pronaia in Delphi: archaeological hypotheses and structural suggestions. International Journal of Architectural Heritage, 19(6), 906-931. https://doi.org/10.1080/15583058.2024.2316289
Beatini, V., Poologanathan, K. & Rajanayagam, H. (2023). Testing a foldable origami sandwich panel and kirigami joints. 113-113. Abstract from The Italian Workshop on Shell and Spatial Structures, Turin, Italy.
Aita, D., Beatini, V., Garavaglia, E., Paris, V., Pizzigoni, A. & Sgambi, L. (2023). Stone reciprocal structures: suggestions from ancient Greece. Abstract from the IASS Annual Symposium 2023
, Melbourne, Australia.
Hudert, M. M. & Mangliar, L. (2023). A reconfigurable construction system based on hypar timber components. In IASS 2023 Melbourne Symposium: Design Competition (WG21) (pp. 1-7). International Association for Shell and Spatial Structures (IASS).
Jacobsen, E. L., Wandahl, S. & Teizer, J. (2024). Forecasting Construction Labor Productivity Metrics. In Y. Turkan, J. Louis, F. Leite & S. Ergan (Eds.), Computing in Civil Engineering 2023: : Resilience, Safety, and Sustainability - Selected Papers from the ASCE International Conference on Computing in Civil Engineering 2023 (pp. 1022 - 1029). American Society of Civil Engineers (ASCE). https://doi.org/10.1061/9780784485248.122
Dahl, M. R., Petersen, C. K., Thomsen, T. & Johnsen, S. S. (2023). PIX pilotprojekt evaluering. Aarhus University. Centre for Educational Development - CED.
Li, J., Andersen, L. V. & Hudert, M. M. (2023). The Potential Contribution of Modular Volumetric Timber Buildings to Circular Construction: A State-of-the-Art Review Based on Literature and 60 Case Studies. Sustainability, 15(23), Article 16203. https://doi.org/10.3390/su152316203
Harichandran, A., Raphael, B. & Mukherjee, A. (2023). Relevance of deep sequence models for recognising automated construction activities: a case study on a low-rise construction system. Journal of Information Technology in Construction, 28, 458-481. https://doi.org/10.36680/j.itcon.2023.023
Wandahl, S., Pérez, C. T., Salling, S. & Lerche, J. (2022). ROBUSTNESS OF WORK SAMPLING FOR MEASURING TIME WASTE. 247-258. Paper presented at 30th Annual Conference of the International Group for Lean Construction, IGLC 2022, Edmonton, Canada. https://doi.org/10.24928/2022/0127
Aita, D., Beatini, V., Garavaglia, E., Paris, V., Pizzigoni, A. & Sgambi, L. (2023). The stone roof of the Tholos of Athena Pronaia in Delphi: Structural hypotheses starting from fragments of marble tiles. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 48(M-2-2023), 59-66. https://doi.org/10.5194/isprs-Archives-XLVIII-M-2-2023-59-2023
Gabel, C., Elholm, G., Rasmussen, M. K., Broholt, T. H., Jensen, S. R., Petersen, S. & Sigsgaard, T. (2023). The HOME-Health (HOusing, environMEnt, and Health) Study: Description of a Danish natural experiment, designed as a longitudinal study with repeated measurements, providing internal- and external validity of the study. Environmental Health Insights, 17. https://doi.org/10.1177/11786302231181489
Jacobsen, E. L., Teizer, J. & Wandahl, S. (2023). An On-body Sensor-based Visual Management Tool for Work Task Progress Monitoring. In The 30th EG-ICE: International Conference on Intelligent Computing in Engineering (pp. 959-968) https://www.ucl.ac.uk/bartlett/construction/sites/bartlett_construction/files/an_on-body_sensor-based_visual_management_tool_for_work_task_progress_monitoring_0.pdf
Harichandran, A., Wandahl, S. & Andersen, L. V. (2023). State of the art Technologies that Facilitate Transition of Built Environment into Circular Economy. In B. Garcia de Soto, V. Gonzalez & I. Brilakis (Eds.), Proceedings of the 40th International Symposium on Automation and Robotics in Construction (pp. 730-737). International Association on Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2023/0101
Perez, C. T., Salling, S. T. & Wandahl, S. (2023). MEASURING TIME SPENT IN VALUE-ADDING WORKSPACES USING SMARTWATCHES. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 1440–1450) https://doi.org/10.24928/2023/0101
Salling, S. T., Perez, C. T. & Wandahl, S. (2023). Perception of Project Management Among Construction Workers: A Survey in Denmark. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 882-893) https://doi.org/10.24928/2023/0124
Wandahl, S., Perez, C. T., Salling, S. T., H. Hansen, C. H., K. Nielsen, M. & Nissen, T. (2023). Daily Huddles’ Effect on Crew Productivity. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 1255–1266) https://doi.org/10.24928/2023/0183
Perez, C. T., Salling, S. T. & Wandahl, S. (2023). Location-Based Work Sampling: Field Testing and Utility Evaluation. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 1160–1171) https://doi.org/10.24928/2023/0131
Ormrod, R. P. (2023). How to Structure a Thesis, Report or Paper: A Guide for Students. Routledge.
Jacobsen, E. L., Teizer, J. & Wandahl, S. (2023). Work estimation of construction workers for productivity monitoring using kinematic data and deep learning. Automation in Construction, 152, Article 104932. https://doi.org/10.1016/j.autcon.2023.104932
Wandahl, S., Perez, C. T., Salling, S. T. & Neve, H. H. (2023). Correlation of Construction Workers’ Movement and Direct Work Rates. Journal of Engineering, Project, and Production Management , 13(2), 125-137. https://doi.org/10.32738/JEPPM-2023-0013
Rahbek, L. W., Carsten R. Terp, C., Alibrandi, U. & Kirkegaard, P. H. (2022). Stock optimization of naturally curved wood logs on freeform truss structures. In Proceedings of the IASS 2022 Symposia International Association for Shell and Spatial Structures (IASS). https://www.ingentaconnect.com/contentone/iass/piass/2022/00002022/00000007/art00019?crawler=true&mimetype=application/pdf
Amato, V., Hedegaard, R. E., Knudsen, M. D. & Petersen, S. (2023). Room-level load shifting of space heating in a single-family house – A field experiment. Energy and Buildings, 281, Article 112750. https://doi.org/10.1016/j.enbuild.2022.112750
Maribo, P. H. (2023). Fra renseanlæg til ressourceanlæg. Vand & Jord, 30(1), 27-29.
Sousa Santos, R., Pimenta do Vale, C., Bogoni, B. & Kirkegaard, P. H. (2022). Freehand Drawing as a Didactic Instrument. In Z. Adil & A. Marey (Eds.), A Focus on Pedagogy: Teaching, Learning and Research in the Modern Academy (pp. 373-381). Architecture media politics society (AMPS). https://repositorio-aberto.up.pt/bitstream/10216/147921/3/609726.pdf
Teizer, J. & Harichandran, A. (2022). D4. 7–Interactive Visual Material for Workforce Training v1. Cogito. https://cogito-project.eu/wp-content/uploads/2019/02/COGITO_D4.7_Interactive-Visual-Material-for-Workforce-Training-v1_vf.pdf
Harichandran, A. & Teizer, J. (2022). Automated Recognition of Hand Gestures for Crane Rigging using Data Gloves in Virtual Reality. In Proceedings of the 39th International Symposium on Automation and Robotics in Construction, ISARC 2022 (pp. 304-311). International Association for Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2022/0043
Chronopoulos, C., Teizer, J. & Esterle, L. (2022). Trajectory Prediction: A Review of Methods and Challenges in Construction Safety. In J. Teizer & C. P. Leslie Schultz (Eds.), Proceedings of the 29thEG-ICE International Workshop on Intelligent Computing in Engineering (pp. 428-438). European Group for Intelligent Computing in Engineering (EG-ICE). https://doi.org/10.7146/aul.455.c233
Johansen, K. W., Schultz, C. P. L. & Teizer, J. (2022). BIM-based fall hazard ontology and benchmark model for comparison of automated prevention through design approaches in construction safety. In J. Teizer & C. P. Leslie Schultz (Eds.), Proceedings of the 29thEG-ICE International Workshop on Intelligent Computing in Engineering (pp. 408-417) https://doi.org/10.7146/aul.455.c231

Displaying results 51 to 100 out of 250

Previous

1

2

3

4

5

Next

Revised 13.11.2025
-
AU Engineering