Luongo, D.
, Franza, A., Nicodemo, G.
, Prada-Sarmiento, L. F., Ferlisi, S., Gullà, G. & Peduto, D. (2026).
Greenfield Finite Element Modelling for Damage Assessment of Axially Rigid Buildings Under Groundwater-Driven Slope Movements. I
IAEG 2026: Engineering Geology in a Rapidly Changing World - XV IAEG World Congress TU Delft OPEN Publishing.
https://doi.org/10.59490/6ad293e51111c11e2bf48062
Nordtorp, F., Baş, E. E.
, Gomes, C., Jensen, P., Jørgensen, J.
& Abbiati, G. (2026).
Hybrid testing of wind turbine components using Kane’s method.
Mechanical Systems and Signal Processing,
261, Artikel 115055.
https://doi.org/10.1016/j.ymssp.2026.115055
Chen, G., Zhang, G., Liu, Y., Li, R.
& Rong, L. (2026).
Impacts of balconies on air quality within idealized building array: CFD modelling with solar radiation.
Building and Environment,
298, Artikel 114615.
https://doi.org/10.1016/j.buildenv.2026.114615
Hu, H., Ma, X., Zuo, J., Wei, Y., She, A., Yao, W.
& Wu, M. (2026).
Improvement of concrete performance through a ternary aggregate system: Microstructural insights into pore structure and ITZ characteristics.
Cement and Concrete Composites,
166, Artikel 106388.
https://doi.org/10.1016/j.cemconcomp.2025.106388
Yi, Q., Hempel, S., Janke, D., Wang, X.
, Zhang, G., Aarnink, A. J. A., Amon, B. & Amon, T. (2026).
Influence of barn design on airflow and airborne pollutant dispersion in a naturally ventilated pig barn with an outdoor yard.
Results in Engineering,
30, Artikel 110458.
https://doi.org/10.1016/j.rineng.2026.110458
Quinteros, S., Dyvik, R., Peikli, I., Silva, D. C. A., Seiphoori, A., Westgate, Z., Kidane, M., Zepilli, D.
, Sørensen, K. K., Song, S., Uday, A., Cudmani, R., Gebremeskel, B. M., Stutz, H. H., Franco, A. & Chen, Z. (2026).
Interface Friction Angle from Ring Shear Tests on Sand: A Round Robin.
Journal of Geotechnical and Geoenvironmental Engineering - ASCE,
152(6), Artikel 04026024.
https://doi.org/10.1061/JGGEFK.GTENG-13628
Agkathidis, A.
, Hudert, M. & Medel-Vera, C. (2026).
Introduction.
SpringerBriefs in Architectural Design and Technology,
Part F1429, vii-viii.
Purup, P. B., Petersen, S., Christensen, J., Jensen, S. R., Schlesinger, M. & Gylling, T. (2026).
LCA VOLUME: Sænk klimaaftrykket med parametrisk byplanmodel. (1. udgave udg.).
Canales-Brenlla, L., Koch, F., Tafili, M.
, Prada-Sarmiento, L. F. & Wichtmann, T. (2026).
Mechanical behaviour of Australian superfine silica sand: from monotonic to high-cyclic loading.
Acta Geotechnica,
21(8), 5169-5189.
https://doi.org/10.1007/s11440-026-02969-9
Wei, R., Wang, T., Sassoni, E., Endrerud, P. E., Simonsen, M. E., Nielsen, R. P.
& Wu, M. (2026).
Mechanistic insights into hardened cement pastes treated by diammonium and dipotassium hydrogen phosphates.
Construction and Building Materials,
530, Artikel 146572.
https://doi.org/10.1016/j.conbuildmat.2026.146572
Hernandez-Guardado, A., Franza, A., Reale, D., Nicodemo, G., Peduto, D. & Petrella, F. (2026).
MT-InSAR monitoring of deep excavations: a feasibility study of analytical kinematic constraints to assess three-dimensional surface movements. Afhandling præsenteret på 21st ICSMGE, Vienna.
https://doi.org/10.53243/ICSMGE2026-820
Feliziani, F., Marmoni, G. M., Montagnese, M., Sobhani, R.
, Istrati, D., Eberhardt, E. & Martino, S. (2026).
Numerical modelling of static and dynamic factors controlling the progressive retreat of rocky coastal cliffs.
Landslides,
23(10), 2909-2931.
https://doi.org/10.1007/s10346-026-02800-2
Put, F.
, Sørensen, M. B., Abbiati, G., Lucherini, A., Merci, B. & Van Coile, R. (2026).
Optimal experimental design for the calibration of a high-temperature thermal strain model for concrete during cooling.
Construction and Building Materials,
518, Artikel 145731.
https://doi.org/10.1016/j.conbuildmat.2026.145731
Wei, R., Alfaro, E.
, Wang, T. & Wu, M. (2026).
Optimizing In-Situ Strengthening of Low-Strength Porous Mortar Using a Definitive Screening Design Study. 306-316. Afhandling præsenteret på The 2nd International Conference on Net-Zero Built Environment: Innovations in Materials, Structures, and Management, Cape Town, Sydafrika.
https://doi.org/10.1007/978-3-032-27698-8_28
Li, R., Meng, Q., Shi, Y., Zhang, N.
, Chen, G. & Xu, G. (2026).
Predictive modelling of pedestrian‑level outdoor ventilation in urban residential areas with varied morphological parameters at comparable building densities.
Sustainable Cities and Society,
144, Artikel 107424.
https://doi.org/10.1016/j.scs.2026.107424
Agkathidis, A.
, Hudert, M. & Medel-Vera, C. (2026).
Preface. I A. Agkathidis, M. Hudert & C. Medel-Vera (red.),
Architecture in the AI Era for Research, Practice, and Pedagogy (s. v). Springer.
Modé, P., Alexopoulos, M. J., Sobhani, R., Spyrakos, C.
& Istrati, D. (2026).
Probabilistic tsunami risk assessment of cultural heritage in the Mediterranean Sea based on GIS and advanced computational models.
Frontiers in Built Environment,
12, Artikel 1778867.
https://doi.org/10.3389/fbuil.2026.1778867
Lyu, J., Ding, S.
, Wolff, C. D., Gao, R.
& Guo, Z. (2026).
Regio-Stereoselective Synthesis of Galactosyl-sn-2-glycerol by Thermotoga naphthophila Glycosidase-Catalyzed Transglycosylation in a Cosolvent-Mediated System: Kinetic and Thermodynamic Insights.
ACS Sustainable Chemistry & Engineering,
14(17), 8221-8232.
https://doi.org/10.1021/acssuschemeng.6c00122
Shen, X., Ming, S., Wu, W., Xie, D., Yao, H., Vishnupriya, V., Zhang, H., Da, C.
& Zhang, G. (2026).
Short-term time series predictions of greenhouse gas emission from dairy houses based on diverse machine learning models.
Computers and Electronics in Agriculture,
247, Artikel 111699.
https://doi.org/10.1016/j.compag.2026.111699
Kristoffersen, J. C., Kabel, T., Georgakis, C. T., Bellos, V. & Karmpadakis, I. (2026).
Spatio-temporal measurement of laboratory wave fields using LiDAR.
Coastal Engineering,
209, Artikel 105047.
https://doi.org/10.1016/j.coastaleng.2026.105047
Zhao, Y., Wang, J., Li, J., Wang, Y., Hussein, T.
, Zhang, G. & Zhao, T. (2026).
Study on rapid identification of key-pollutant diffusion model in high-pollution area of construction tunnel.
Building and Environment,
297, Artikel 114551.
https://doi.org/10.1016/j.buildenv.2026.114551
Mamedipaka, R., Yadav, A. K., Sinhmar, S.
, Yıldırım, H. C. & Thapliyal, S. (2026).
Tailoring microstructure and performance of thick-walled SS316L through overlap control in wire arc directed energy deposition.
Materials Characterization,
231, Artikel 115899.
https://doi.org/10.1016/j.matchar.2025.115899
Ulanowska, N., Rong, L., van Dijk, L., Riber, A. B., Foldager, L. & Herskin, M. S. (2026).
Temperaturer i køretøjer til transport af udsætterhøns: - brug af CFD-simuleringer til at undersøge temperaturfordeling. DCA - Nationalt Center for Fødevarer og Jordbrug. Rådgivningsrapport fra DCA - Nationalt Center for Fødevarer og Jordbrug
Amaripadath, D., Joshi, M. Y., Hamdy, M.
, Petersen, S., Stone, B. & Attia, S. (2026).
Thermal resilience in a renovated nearly zero-energy dwelling during intense heat waves.
Journal of Building Performance Simulation,
19(1), 86-105.
https://doi.org/10.1080/19401493.2023.2253460
Kilian, J.
, Mangliar, L., D’Arenzo, G., Belladelli, L.
& Hudert, M. (2026).
Timber joinery revisited: design and experimental testing of a mono-material timber joint for multi-story buildings.
Architecture, Structures and Construction,
6, Artikel 28.
https://doi.org/10.1007/s44150-026-00201-6