Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Li, J., Hudert, M. M. & Andersen, L. V. (2024). A study of internal stiffeners in wooden slab panels obtained by topology optimisation. I Proceedings of the IASS 2024 Symposium: Redefining the Art of Structural Design International Association for Shell and Spatial Structures (IASS).

Yildirim, H. C. & K. Liaw, P. (2024). Data-driven conditional probability to predict fatigue properties of multi-principal element alloys (MPEAs). Computer Methods in Applied Mechanics and Engineering, 432(Part A), Artikel 117358. https://doi.org/10.1016/j.cma.2024.117358

A.E. , D., Franza, A. & Sørensen, K. K. (2024). A t-z approach for the design of axially loaded piles in consolidating soil. I Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society: Proceedings of the XVIII ECSMGE 2024 (s. 448-451). CRC Press. https://doi.org/10.1201/9781003431749-60

Lev Yehudi, O., Franza, A., von Solms, N. & Klar, A. (2024). A novel mechanical energy storage solution using underground CO2 hydrate capsules. I Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society: Proceedings of the XVIII European Conference on Soil Mechanics and Geotechnical Engineering (s. 3094-3099). CRC Press. https://doi.org/10.1201/9781003431749-607

Tang, C., M. Marshall, A., Heron, C. M., Franza, A. & Xu, J. (2024). Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge. I N. Guerra, M. M. Fernandes, C. Ferreira, A. G. Correia, A. Pinto & P. S. Pinto (red.), Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society (s. 2667-2670). CRC Press. https://doi.org/10.1201/9781003431749-518

Franza, A. (2024). Comparison of floating and end-bearing pile wall barriers for tunnelling in layered soil. I Proceedings of the XVIII ECSMGE 2024 (s. 1626-1629) https://doi.org/10.1201/9781003431749-301

Gres, S., Anastasopoulos, D., Hansen, J. F., Abbiati, G. & Reynders, E. P. B. (2022). Statistical sensitivity-based damage localization with optical strain-based features. I W. Desmet, B. Pluymers, D. Moens & S. Neeckx (red.), Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics (s. 2816-2825). KU Leuven, Departement Werktuigkunde.

Krabbenhoft, S. & Damkilde, L. (2024). Design of Rectangular Footings in Cohesionless Soil Subjected to Torsion. International Journal of Geomechanics, 24(9), Artikel 04024198. https://doi.org/10.1061/IJGNAI.GMENG-9826

Franza, A. (2024). General Report – sustainability and resilience of underground infrastructure. I Geotechnical Aspects of Underground Construction in Soft Ground (s. 436-444) https://doi.org/10.1201/9781003413790-52

Yu, Y., Franza, A., Neves, L. & M. Marshall, A. (2024). Effect of infill nonlinearity on frame response to tunnelling. I Geotechnical Aspects of Underground Construction in Soft Ground (s. 223-230) https://doi.org/10.1201/9781003413790-26

K. L. Wong, E., Franza, A., Alagha, A. S. N. & Viggiani, G. M. B. (2024). A continuum analysis of piles affected by an advancing tunnel excavation during centrifuge tests with a miniature TBM. I Geotechnical Aspects of Underground Construction in Soft Ground (s. 206-214) https://doi.org/10.1201/9781003413790-24

Wu, M. (2024). Challenges in achieving effective self-healing for cement-based materials and concrete structures. Abstract fra 9th International Conference on Self-Healing Materials - ICSHM2024, Madrid, Spanien.

Wu, M. (2024). Abrasion damage of concrete for hydraulic structures: testing and prediction. Abstract fra The 2nd International Conference on Cement and Concrete Technology (ICCCT 2024), Kina.

Nordtorp, F., Baş, E. E., Gomes, C. & Abbiati, G. (2024). A Hybrid Testing Framework for Wind Turbine Mechanical Components. Journal of Physics: Conference Series, 2767(5), Artikel 052046. https://doi.org/10.1088/1742-6596/2767/5/052046

Liu, X. Y., Franza, A. & Jimenez, R. (2024). Effects of relative density and dilatancy on stress and deformation arching of sand over an active trapdoor. Computers and Geotechnics, 173, Artikel 106485. https://doi.org/10.1016/j.compgeo.2024.106485

Sorge, E., Riascos, C., Caterino, N., Demartino, C. & Georgakis, C. T. (2024). Optimal design of a hinge-spring-friction device for enhancing wind induced structural response of onshore wind turbines. Engineering Structures, 314, Artikel 118305. https://doi.org/10.1016/j.engstruct.2024.118305

Ono, Y., Remes, H., Kinoshita, K., Yildirim, H. C. & Nussbaumer, A. (2024). Local relaxation of residual stress in HFMI-treated high-strength steel welded joints subjected to high-peak loads. Procedia Structural Integrity, 57, 290-297. https://doi.org/10.1016/j.prostr.2024.03.031

Ono, Y., Remes, H., Kinoshita, K., Yildirim, H. C. & Nussbaumer, A. (2024). Local relaxation of residual stress in high-strength steel welded joints treated by HFMI. Welding in the World, 68(8), 2187-2202. https://doi.org/10.1007/s40194-024-01789-3

Ding, S., Dong, S., Ashour, A., Wang, J., Wang, X. & Han, B. (2024). Stainless steel wires reinforced ultra-high performance concrete for self-moderating and self-sensing temperature deformations. Construction and Building Materials, 431, Artikel 136563. https://doi.org/10.1016/j.conbuildmat.2024.136563

Kania, J. G., Sørensen, K. K. & Fellenius, B. H. (2024). The development of unit shaft resistance along driven piles in subsiding soil. Canadian Geotechnical Journal, 61(5), 1035-1050. https://doi.org/10.1139/cgj-2022-0694

Klar, A., Franza, A., Zhou, M. & Huang, H. W. (2025). Introducing tunnel kinematic constraints into an elastic continuum formulation of tunnel-soil-pipeline interaction. Geotechnique, 75(13). https://doi.org/10.1680/jgeot.24.00023

Yu, F., Wang, J., Dong, S., Ding, S. & Han, B. (2024). Understanding the effect of non-carbon-based nanoinclusions on chloride penetration resistance and chloride binding capacity of ultra-high performance cementitious composite. Journal of Building Engineering , 90, Artikel 109460. https://doi.org/10.1016/j.jobe.2024.109460

Hagsten, L. G., van Logtestijn, M. & Laustsen, H. H. (2022). Point foundation. Upper and lower bound solution for point load and upper bound solution for distributed load. Bygningsstatiske Meddelelser, 92(2), 1-13.

Hagsten, L. G., Fisker, J., Svarre, C. & Frandsen, T. (2022). On the influence of transverse reinforcement type and layout on the shear capacity of thin-weed concrete beams. Bygningsstatiske Meddelelser, 92(2), 15-29. Artikel 92-2.

Liu, Q., Andersen, L. V., Zhang, M. & Wu, M. (2024). Abrasion damage of concrete for hydraulic structures and mitigation measures: A comprehensive review. Construction and Building Materials, 422, Artikel 135754. https://doi.org/10.1016/j.conbuildmat.2024.135754

Tang, C., Franza, A., Xu, J. & Marshall, A. (2025). Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study. Geotechnique, 75(4), 550-562. https://doi.org/10.1680/jgeot.23.00201

Du, W., Yu, F., Qiu, L., Guo, Y., Wang, J. & Han, B. (2024). Effect of Steel Fibers on Tensile Properties of Ultra-High-Performance Concrete: A Review. Materials, 17(5), Artikel 1108. https://doi.org/10.3390/ma17051108

Yan, D., Qiu, L., Wang, J., Ashour, A., Wang, X. & Han, B. (2024). Dynamic damage constitutive model for UHPC with nanofillers at high strain rates based on viscoelastic dynamic constitutive model and damage evolution equation. Journal of Building Engineering , 83, Artikel 108428. https://doi.org/10.1016/j.jobe.2023.108428

Liu, Q., Andersen, L. V. & Wu, M. (2024). Prediction of concrete abrasion depth and computational design optimization of concrete mixtures. Cement and Concrete Composites, 148, Artikel 105431. https://doi.org/10.1016/j.cemconcomp.2024.105431

Soltys, R., Tomko, M., Kmet, S. & Georgakis, C. T. (2024). Dynamic testing of a long-span suspension cable net. I V. Gattulli, M. Lepidi & L. Martinelli (red.), Dynamics and Aerodynamics of Cables - ISDAC 2023: ISDAC 2023 (s. 41-48). Springer. https://doi.org/10.1007/978-3-031-47152-0_4

Matejícka, L., Delpech, P., Georgakis, C. T. & Flamand, O. (2024). An experimental investigation of ice and snow shedding from bridge cables with and without surface modifications. Cold Regions Science and Technology, 220, Artikel 104148. https://doi.org/10.1016/j.coldregions.2024.104148

Luo, Q., Zhao, L. & Wu, M. (2024). Microstructural damage characterization of NC-UHPC composite under salt freeze-thaw cycles based on ex-situ X-ray computed tomography. Construction and Building Materials, 414, Artikel 134980. https://doi.org/10.1016/j.conbuildmat.2024.134980

Luo, Q., Liu, P. & Wu, M. (2024). Re-using excavated rock from underground tunneling activities to develop eco-friendly ultrahigh performance concrete. Case Studies in Construction Materials, 20, Artikel e02867. https://doi.org/10.1016/j.cscm.2024.e02867

Stamenov, D., Abbiati, G. & Sauder, T. (2023). Transfer Function Estimation with a Numerical Harmonic Probing Algorithm. Afhandling præsenteret på X International Conference on Computational Methods in Marine Engineering, Madrid, Spanien. https://doi.org/10.23967/marine.2023.028

Zamani, G., Franza, A., Sørensen, K. K., Andersen, L. V., Tourchi, S. & Stutz, H. H. (2023). A simplified approach to numerical modelling of an underground pumped hydroelectric energy storage system. I L. Zdravkovic, S. Kontoe, D. Taborda & K. Tsiampous (red.), 10th European Conference on Numerical Methods in Geotechnical Engineering https://doi.org/10.53243/NUMGE2023-104

Wang, J. & Wu, M. (2023). An easy and robust self-healing concept for cement.

Yu, J., Cigura, A., Gupta, K., Shi, X., Wu, M. & Ambat, R. (2023). Investigation of Cement-Metal barrier performance in abandoned CO2 storage wells. Poster-session præsenteret på Danish Offshore Technology Conference 2023, Kolding, Danmark.

Miah, M. J., Wu, M., Nielsen, R. & Simonsen, M. E. (2023). A novel treatment method to strengthen the properties of scale and cement as a barrier material for well abandonment. Poster-session præsenteret på Danish Offshore Technology Conference 2023, Kolding, Danmark.

Stamenov, D., Abbiati, G. & Sauder, T. (2023). Data-driven modeling of hydrodynamic loading using NARX and harmonic probing. Journal of Physics: Conference Series, 2626(1), Artikel 012065. https://doi.org/10.1088/1742-6596/2626/1/012065

Hansen, S. T., Thule, C., Gomes, C., Lausdahl, K. G., Madsen, F. P., Abbiati, G. & Larsen, P. G. (2024). Co-simulation at different levels of expertise with Maestro2. Journal of Systems and Software, 209, Artikel 111905. https://doi.org/10.1016/j.jss.2023.111905

Yildirim, H. C. & PIRLING , T. (2023). Strain behaviour of friction stir welding of dissimilar materials.. Datasæt . https://doi.org/10.5291/ILL-DATA.1-02-373

Bogojevic, O., Zhang, Y., Wolff, C. D., Johnsen, N. K., Arevång, C. & Guo, Z. (2024). A Chemo-Enzymatic Cascade Strategy for the Synthesis of Phosphatidylcholine Incorporated with Structurally Diverse FAHFAs. The Journal of Organic Chemistry, 89(2), 1035-1044. https://doi.org/10.1021/acs.joc.3c02131

Wu, M. (2023). Carbon(ate) cement: dream or reality?. Abstract fra WASCON2023–Innovative Valorization of Alternative Materials and Wastes towards Circular Construction, Hong Kong, Kina.

Li, J., Andersen, L. V. & Hudert, M. M. (2023). The Potential Contribution of Modular Volumetric Timber Buildings to Circular Construction: A State-of-the-Art Review Based on Literature and 60 Case Studies. Sustainability, 15(23), Artikel 16203. https://doi.org/10.3390/su152316203

Wang, J. (2023). Rheological properties of UHPC and its viscosity control for application. Invitation report.

Wang, J. (2023). Rheological properties and engineering practice of ultra-high performance concrete. Keynote report.

Wang, J. (2022). An easy and robust self-healing concept for cement.. Poster-session præsenteret på Danish Offshore Technology Conference 2022 , Kolding, Danmark.

Rygg Johnsen, A., Petersen, J. E., Pedersen, M. M. & Yildirim, H. C. (2024). Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts. Welding in the World, 68(2), 361-409. https://doi.org/10.1007/s40194-023-01604-5

Wang, J., Dong, S., Zhou, C., Ashour, A. & Han, B. (2021). Investigating pore structure of nano-engineered concrete with low-field nuclear magnetic resonance. Journal of Materials Science, 56, 243–259. https://doi.org/10.1007/s10853-020-05268-0

Ding, S., Wang, J., Dong, S., Ashour, A., Liu, Y., Qui, L., Han, B. & Ou, J. (2022). Developing multifunctional/smart civil engineering to fight viruses. ACS Sustainable Chemistry & Engineering, 10(2), 678–690. https://doi.org/10.1021/acssuschemeng.1c07642

Viser resultater 101 til 150 ud af 842

Forrige

Næste

Back to the main page

Revideret 13.11.2025

AU Engineering