Publications

Sortér efter: Dato | Forfatter | Titel

Nezhentseva, A., Andersen, T. L., Andersen, L. V. & Ibsen, L. B. (2012). Wave Forces on Transition Pieces for Bucket Foundations for Offshore Wind Turbines. Department of Civil Engineering, Aalborg University. DCE Technical Memorandum Nr. 28

Andersen, L. V., Mangliar, L., Hudert, M. M., Flodén, O. & Persson, P. (2022). Vibroacoustic performance of multi-storey buildings: A comparison of lightweight and heavy structures in the early design phase. I A. Zingoni (red.), Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa (s. 108-114). CRC Press. https://doi.org/10.1201_9781003348450-17

Andersen, L. V. & Kirkegaard, P. H. (2013). Vibrations in a Multi-Storey Lightweight Building Structure: Influence of Connections and Nonstructural Mass. I A. Zingoni (red.), Research and Applications in Structural Engineering, Mechanics and Computation: proceedings of the fifth international conference on structural engineering, mechanics and computation, Cape Town, South Africa, 2-4 September 2013 (s. 131-136). CRC Press.

Andersen, L. V. & Liingaard, M. (2005). Vibration screening with sheet pile walls. I Environmental Vibrations : Prediction, Monitoring, Mitigation and Evaluation (ISEV 2005) (s. 429-437)

Andersen, L. V. & Jones, C. J. C. (2002). Vibration from a railway tunnel predicted by coupled finite element and boundary element analysis in two and three dimensions. I H. Grundmann & G. Schueller (red.), Vibration from a railway tunnel predicted by coupled finite element and boundary element analysis in two and three dimensions (s. 1131-1136). CRC Press/Balkema.

Andersen, L. (2010). Vibrationer fra jernbane til den ny Femern Bælt forbindelse. Department of Civil Engineering, Aalborg University. DCE Contract Reports Nr. 98

Liingaard, M., Andersen, L. V. & Ibsen, L. B. (2005). Vertical Impedance for Stiff and Flexible Embedded Foundations. I H. Takemiya (red.), Environmental Vibrations : Prediction, Monitoring, Mitigation and Evaluation: ISEV 2005 CRC Press.

Nielsen, S. R. K. & Andersen, L. V. (2001). Vehicle Moving on a Continuously Supported Beam with Irregular Surface. I R. B. Corotis, G. I. Schuëller & M. Shinozuka (red.), Structural Safety and Reliability Swets & Zeitlinger.

Andersen, L. V. & Nielsen, S. R. K. (2001). Vehicle Moving along a Beam on a Random Modified Kelvin Foundation. I Proceedings of the Eighth International Conference on Sound and Vibration (s. 2811-2818) http://vbn.aau.dk/files/17211393/Vehicle_moving_along_a_beam_on_a_random_modified_Kelvin_Foundation

Gres, S., Döhler, M., Andersen, P. & Mevel, L. (2018). Variance computation of the modal assurance criterion. I D. Moens, W. Desmet, B. Pluymers & W. Rottiers (red.), Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics (s. 2939-2950). KU Leuven, Departement Werktuigkunde. http://past.isma-isaac.be/downloads/isma2018/proceedings/Contribution_443_proceeding_3.pdf

Gres, S., Döhler, M., Andersen, P. & Mevel, L. (2019). Variance computation of MAC and MPC for real-valued mode shapes from the stabilization diagram. Afhandling præsenteret på International Operational
Modal Analysis Conference 2019, Copenhagen, Danmark.

Whyte, C. A., Mackie, K. R., Abbiati, G. & Stojadinovic, B. (2015). Validation of OpenFRESCO-based thermomechanical hybrid simulation to address an earthquake-fire coupled problem. I B. A. Schrefler, E. Onäte & M. Papadrakakis (red.), Proceedings of the VI International Conference on Coupled Problems in Science and Engineering (s. 290-299)

Bucinskas, P., Sneideris, J., Agapii, L. & Andersen, L. V. (2017). Validation of a Numerical Model for Dynamic Three-Dimensional Railway Bridge Analysis by Comparison with a Small-Scale Laboratory Model. The International Journal of Railway Technology, 6(2), 61-85. https://doi.org/10.4203/ijrt.6.2.4

Andersen, L. V. (2015). Using periodicity to mitigate ground vibration. I M. Papadrakakis, V. Papadopoulos & V. Plevris (red.), Proceedings of COMPDYN 2015: 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Bind 1, s. 922-932). Institute of Structural Analysis and Antiseismic Reseach, National Technical University of Athens. https://www.dropbox.com/s/1zd6hhp4jo7xr6q/compdyn_2015_vol_1.pdf?dl=1

S. Bursi, O., Abbiati, G., Molinari, M. & Xu, G. (2012). Use of Partitioned Time Integration Schemes for Parallel Simulations of Hybrid Systems. I 5th European Conference on Structural Control

Lim, H. U., Manuel, L., Persson, P. & Andersen, L. V. (2023). Uncertainty quantification of wood floor system modal frequencies resulting from variable densities in members. Structures, 53, 1425-1434. https://doi.org/10.1016/j.istruc.2023.04.111

Gres, S., Riva, R., Yeniceli, S. C., Andersen, P. & Łuczak, M. (2022). Uncertainty quantification of modal parameter estimates obtained from subspace identification: An experimental validation on a laboratory test of a large-scale wind turbine blade. Engineering Structures, 256, artikel 114001. https://doi.org/10.1016/j.engstruct.2022.114001

Gres, S., Döhler, M., Jacobsen, N-J. & Mevel, L. (2022). Uncertainty quantification of input matrices and transfer function in input/output subspace system identification. Mechanical Systems and Signal Processing, 167(Part B), artikel 108581. https://doi.org/10.1016/j.ymssp.2021.108581

Abbiati, G., Marelli, S., Sudret, B., S. Bursi, O. & Stojadinovic, B. (2015). Uncertainty Propagation and Global Sensitivity Analysis in Hybrid Simulation using Polynomial Chaos Expansion. I Y. Tsompanakis, J. Kruis & B. H. V. Topping (red.), Conference of the ASCE Engineering Mechanics Institute. ASCE.

Abbiati, G., Marelli, S., S. Bursi, O., Sudret, B. & Stojadinovic, B. (2015). Uncertainty propagation and global sensitivity analysis in hybrid simulation using polynomial chaos expansion. I The Fourth International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering

Ma, C. Y., Alibrandi, U. & Koh, C. G. (2014). Uncertainties in Effective Tension and Bending Moment of a Steel Catenary Riser under Random Wave. I Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the Sixth International Symposium on Uncertainty, Modeling, and Analysis (ISUMA American Society of Mechanical Engineers (ASME). https://doi.org/10.1061/9780784413609.256

Abbiati, G., Marelli, S., Ligeikis, C., Christenson, R. & Stojadinović, B. (2022). Training of a Classifier for Structural Component Failure Based on Hybrid Simulation and Kriging. Journal of Engineering Mechanics, 148(1), artikel 04021137. https://doi.org/10.1061/(ASCE)EM.1943-7889.0002048

Abu-Ghaida, H., Andersen, L. V., Wandahl, S. & Kamari, A. (2021). Towards integration of LCA and LCC as a driver for decision-making by municipalities for sustainable renovation of existing buildings. Poster session præsenteret på The 10th International Conference on Life Cycle Management, Stuttgard, Tyskland.

mallikarjuna, B. K., Chockalingam, S., Alibrandi, U., Asmone, A. S. & Manthapuri, S. (2022). Toward Responsible Design of Low-Carbon Buildings: From Concept to Engineering. Journal of Risk and Uncertainty in Engineering Systems - Part A : Civil Engineering, 8(2), artikel 02522001. https://doi.org/10.1061/AJRUA6.0001216

Augustesen, A., Andersen, L. & Carsten S. Sørensen, C. S. (2005). Time Function for Driven Piles in Clay. Department of Civil Engineering, Aalborg University. AAU Geotechnical Engineering Papers Nr. R0501

Ceravolo, R. & Abbiati, G. (2013). Time Domain Identification of Structures: a Comparative Analysis of Output-Only Methods. Journal of Engineering Mechanics, 139(4), 537-544. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000503

Clausen, J. C. S., Andersen, L. V. & Damkilde, L. (2009). Three-Dimensional Elasto-Plastic Calculations Using Yield Surfaces with Corner Discontinuities. I E. Onate, D. R. J. Owen & B. Suarez (red.), Computational Plasticity X : Fundamentals and Applications : Barcelona, Spain, 2-4 September 2009 International Center for Numerical Methods in Engineering. https://www.researchgate.net/publication/289621123_Three-dimensional_elasto-plastic_calculations_using_yield_surfaceswith_corner_discontinuities

Clausen, J. C. (red.) (2019). Third Semester and Master’s Thesis Ideas 2019: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 58

Andersen, T. L. & Clausen, J. C. (red.) (2018). Third Semester and Master’s Thesis Ideas 2018: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 57

Clausen, J. C. (red.) (2017). Third Semester and Master’s Thesis Ideas 2017: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 53

Clausen, J. C. (red.) (2016). Third Semester and Master’s Thesis Ideas 2016: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Alibrandi, U. & Ricciardi, G. (2008). The Uniform Design Support Vector Method in Structural Reliability Analysis. I Meccanica Stocastica 2008

Alibrandi, U. & M. Mosalam, K. (2018). The Tail Probability Equivalent Linearization Method for stochastic dynamic analysis of marine structures. I 6th International Symposium on Reliability Engineering and Risk Management

Alibrandi, U. & Ricciardi, G. (2004). The stochastic stress vectors in the static approach of the probabilistic Limit Analysis. I MECCANICA STOCASTICA ’04, AIMETA Congress of Stochastic Mechanics and Structural Reliability

Alibrandi, U., Ma, C. & Koh, C. G. (2015). The Secant Hyperplane Method (SHM) for structural reliability analysis. Journal of Engineering Mechanics, 142(3). https://doi.org/10.1061/(ASCE)EM.1943-7889.0001024

Whyte, C. A., Mackie, K., Abbiati, G. & Stojadinovic, B. (2015). Thermomechanical hybrid simulation of an earthquake-fire-earthquake scenario. I Conference of the ASCE Engineering Mechanics Institute

Alibrandi, U., Impollonia, N. & Ricciardi, G. (2008). The Non-Polynomial Response Surface in the Reliability Buckling Approach. I Meccanica Stocastica 2008

Alibrandi, U. & Ricciardi, G. (2007). The Kernel Density Maximum Entropy method for Non-Gaussian Stochastic Linearization. I 18th AIMETA Congress of Theoretical and Applied Mechanics

Zhang, Z., Høeg, C. E. & Andersen, L. V. (2019). The influence of uncertain soil conditions on the dynamic response of offshore wind turbines using an efficient time-domain model. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 257-258). CRC Press. https://doi.org/10.1201/9780429426506

Alibrandi, U., Ma, C. & Koh, C. G. (2014). The improved FORM for Stochastic Dynamic Analysis. I Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM2014) https://doi.org/10.1061/9780784413609.255

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Gnaur, D. & Clausen, J. (2015). Teaching Smart with Podcasts. International Journal of Engineering Education, 31(2), 486-494.

Andersen, L. & Sørensen, C. S. (2003). Syddansk Universitet & Forskerpark Syd A/S: Rent rum : Vibrationsberegninger. Aalborg Universitetsforlag. FU Rapport

Liu, Q., Li, L., Andersen, L. V. & Wu, M. (2023). Studying the abrasion damage of concrete for hydraulic structures under various flow conditions. Cement and Concrete Composites, 135, artikel 104849. https://doi.org/10.1016/j.cemconcomp.2022.104849

Abbiati, G., Schöbi, R., Sudret, B. & Stojadinovic, B. (2017). Structural Reliability Analysis Using Deterministic Hybrid Simulations and Adaptive Kriging Metamodeling. I Proceedings of the 16th World Conference on Earthquake Engineering

Alibrandi, U. & Ricciardi, G. (2010). Structural Reliability Analysis using a Response Surface based on the Support Vector Method. I XVIII GIMC Conference

Alibrandi, U. & Ricciardi, G. (2011). Structural Reliability Analysis solved through a SVM-based Response Surface. I ICASP 2011

Lees, A. S. & Clausen, J. C. S. (2020). Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests. Canadian Geotechnical Journal, 57(3), 448-452. https://doi.org/10.1139/cgj-2019-0036

Alibrandi, U., Ma, C. & Koh, C. G. (2013). Stochastic Dynamic Analysis of a Steel Catenary Riser connected to a floating vessel. I 26TH KKHTCNN Symposium on Civil Engineering

Alibrandi, U. & Koh, C. G. (2015). Stochastic Dynamic Analysis of a marine riser using the First Order Reliability Method. I 12th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP12 https://doi.org/10.14288/1.0076294

Viser resultater 1 til 50 ud af 245

Næste

Revideret 06.09.2022

Lars Vabbersgaard Andersen