Publications

Sortér efter: Dato | Forfatter | Titel

Liingaard, M., Andersen, L. V. & Ibsen, L. B. (2005). Vertical Impedance for Stiff and Flexible Embedded Foundations. I H. Takemiya (red.), Environmental Vibrations : Prediction, Monitoring, Mitigation and Evaluation: ISEV 2005 CRC Press.

Lees, A. S. & Clausen, J. C. S. (2020). Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests. Canadian Geotechnical Journal, 57(3), 448-452. https://doi.org/10.1139/cgj-2019-0036

Lanese, I., Pavese, A., Abbiati, G. & S. Bursi, O. (2017). Hybrid Testing of Seismic Isolated Structures: Test Reliability and Scaling Issues. I 7th International Conference on Advances in Experimental Structural Engineering

Lamperti Tornaghi, M., Tsionis, G., Pegon, P., Molina, J., Peroni, M., Korzen, M., Tondini, N., Covi, P., Abbiati, G., Antonelli, M. & Gilardi, B. (2021). Experimental study of braced steel frames subjected to fire after earthquake. I 2021 17WCEE Proceedings artikel C001800

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Kirkegaard, P. H., Andersen, L. V. & Dickow, K. A. (2012). On the Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures: a comparison of abaqus and ansys. I Proceedings of the Internoise 2012/ASME NCAD meeting Institute of Noise Control Engineering of the USA, Inc.. http://www.internoise2012.com/index.shtml

Jensen, F. V., Brodersen, L. & Andersen, L. V. (2012). Om høringsprocesserne på Aalborg Universitet. UGlen, (3), 23. http://www.e-pages.dk/aalborguniversitet/115/

Ibsen, L. B., Liingaard, M. & Andersen, L. (2006). Dynamic stiffness of suction caissons: vertical vibrations. Department of Civil Engineering, Aalborg University. DCE Technical reports Nr. 7

Ibsen, L. B., Liingaard, M. & Andersen, L. (2006). Dynamic stiffness of suction caissons: torsion, sliding and rocking. Department of Civil Engineering, Aalborg University. DCE Technical reports Nr. 8

Gres, S., Döhler, M. & Mevel, L. (2021). Statistical optimization for subspace-based damage quantification. Afhandling præsenteret på Structural Health Monitoring of Intelligent Infrastructure, Porto, Portugal.

Gres, S., Döhler, M., Andersen, P., Damkilde, L. & Mevel, L. (2019). Hankel matrix normalization for robust damage detection. Afhandling præsenteret på International Operational
Modal Analysis Conference 2019, Copenhagen, Danmark.

Gres, S., Döhler, M., Andersen, P. & Mevel, L. (2019). Variance computation of MAC and MPC for real-valued mode shapes from the stabilization diagram. Afhandling præsenteret på International Operational
Modal Analysis Conference 2019, Copenhagen, Danmark.

Gres, S., Döhler, M., Andersen, P. & Mevel, L. (2018). Variance computation of the modal assurance criterion. I D. Moens, W. Desmet, B. Pluymers & W. Rottiers (red.), Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics (s. 2939-2950). KU Leuven, Departement Werktuigkunde. http://past.isma-isaac.be/downloads/isma2018/proceedings/Contribution_443_proceeding_3.pdf

Gres, S., Andersen, P., Hoen, C. & Damkilde, L. (2018). Orthogonal Projection-Based Harmonic Signal Removal for Operational Modal Analysis. I Structural Health Monitoring, Photogrammetry and DIC, Volume 6 - Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (Bind 6, s. 9-21). Springer. https://doi.org/10.1007/978-3-319-74476-6_2

Gres, S., Andersen, P. & Damkilde, L. (2018). Operational Modal Analysis of Rotating Machinery. I Rotating Machinery, Vibro-Acoustics and Laser Vibrometry, Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (Bind 7, s. 67-75). Springer. https://doi.org/10.1007/978-3-319-74693-7_7

Gres, S., Fejerskov, M., Ibsen, L. B. & Damkilde, L. (2016). Experimental damping assessment of a full scale offshore Mono Bucket foundation. I Proceedings of ISMA 2016 KU Leuven, Department Werktuigkunde.

Gres, S., Döhler, M., Andersen, P. & Mevel, L. (2019). Kalman filter-based stochastic subspace identification under mixed stochastic and periodic excitation. Poster session præsenteret på European Research Network on System Identification- ERNSI 2019, Maastricht, Holland.

Gres, S., Döhler, M. & Mevel, L. (2021). Covariance computation for system matrices and transfer function from I/O subspace identification. Poster session præsenteret på European Research Network on System Identification ERNSI, 2021, Rennes, Frankrig.

Gres, S., Döhler, M. & Mevel, L. (2021). Hankel matrix-based Mahalanobis distance for fault detection robust towards changes in process noise covariance. IFAC-PapersOnLine, 54(7), 73-78. https://doi.org/10.1016/j.ifacol.2021.08.337

Gres, S., Döhler, M., Jacobsen, N-J. & Mevel, L. (2022). Uncertainty quantification of input matrices and transfer function in input/output subspace system identification. Mechanical Systems and Signal Processing, 167(Part B), artikel 108581. https://doi.org/10.1016/j.ymssp.2021.108581

Gres, S., Riva, R., Yeniceli, S. C., Andersen, P. & Łuczak, M. (2022). Uncertainty quantification of modal parameter estimates obtained from subspace identification: An experimental validation on a laboratory test of a large-scale wind turbine blade. Engineering Structures, 256, artikel 114001. https://doi.org/10.1016/j.engstruct.2022.114001

Gres, S., Fejerskov, M., Ibsen, L. B. & Damkilde, L. (2016). Experimental damping assessment of a full scale offshore Mono Bucket foundation. I P. Sas, D. Moens & A. van de Walle (red.), Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD2016 - International Conference on Uncertainty in Structural Dynamics (s. 4045-4054). KU Leuven, Departement Werktuigkunde.

Gres, S., Döhler, M., Andersen, P., Damkilde, L. & Mevel, L. (2019). Hankel matrix normalization for robust damage detection. I S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (red.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (s. 147-154). International Operational Modal Analysis Conference (IOMAC).

Gres, S., Tatsis, K., Dertimanis, V. & Chatzi, E. (2023). Low-rank approximation of Hankel matrices in denoising applications for statistical damage diagnosis of wind turbine blades. Mechanical Systems and Signal Processing, 197(110391), artikel 110391. https://doi.org/10.1016/j.ymssp.2023.110391

Gonçalves Gomes, C. Â., Abbiati, G. & Larsen, P. G. (2021). Seismic Hybrid Testing using FMI-based Co-Simulation. I M. Sjölund, L. Buffoni, A. Pop & L. Ochel (red.), Proceedings of 14th Modelica Conference 2021, Linköping, Sweden, September 20-24, 2021 (s. 287-295) https://doi.org/10.3384/ecp21181287

Gnaur, D. & Clausen, J. (2015). Teaching Smart with Podcasts. International Journal of Engineering Education, 31(2), 486-494.

Foglia, A., Ibsen, L. B., Nicolai, G. & Andersen, L. V. (2014). Observations on bucket foundations under cyclic loading in dense saturated sand. I C. Gaudin & D. White (red.), Proceedings of the 8th International Conference on Physical Modelling in Geotechnics 2014 (s. 667-673). CRC Press. https://doi.org/10.1201/b16200-91

Flodén, O., Peplow, A., Persson, P., Mangliar, L. & Andersen, L. V. (2022). Effect of modelling the air in rooms on the prediction of vibration transmission in cross-laminated timber buildings. I A. Zingoni (red.), Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa (s. 115-120). CRC Press. https://doi.org/10.1201_9781003348450-18

Firouzianbandpey, S., Griffiths, D. V., Ibsen, L. B. & Andersen, L. V. (2015). Corrigendum: Spatial Correlation Length of Normalized cone data in sand : Case study in the North of Denmark. Canadian Geotechnical Journal, 52(8), 844-857. https://doi.org/10.1139/cgj-2013-0294

Firouzianbandpey, S., Andersen, L. V., Nielsen, B. N. & Ibsen, L. B. (2013). Geotechnical Site Assessment by Seismic Piezocone Test in North of Denmark. I S. Prakash (red.), Seventh International Conference on Case Histories in Geotechnical Engineering : and Symposium in Honor of Clyde Baker Missouri University of Science and Technology.

Domadiya, P. G., Dickow, K. A., Andersen, L. V. & Sorokin, S. (2011). Finite Element Approach for Analyses of Flanking Noise Transmission within Lightweight Panel Structure. Acustica United with Acta Acustica, 97(Supplement 1). https://www.researchgate.net/publication/287078463_Finite_element_approach_for_analysis_of_flanking_noise_transmission_within_lightweight_panel_structure

Damkilde, L., Andersen, L., Kristensen, A. S. & Lund, E. (red.) (2009). Proceedings of the Twenty Second Nordic Seminar on Computational Mechanics. Department of Civil Engineering, Aalborg University. DCE Technical Memorandum Nr. 11

Clausen, J. C. S., Andersen, L. V. & Damkilde, L. (2009). Three-Dimensional Elasto-Plastic Calculations Using Yield Surfaces with Corner Discontinuities. I E. Onate, D. R. J. Owen & B. Suarez (red.), Computational Plasticity X : Fundamentals and Applications : Barcelona, Spain, 2-4 September 2009 International Center for Numerical Methods in Engineering. https://www.researchgate.net/publication/289621123_Three-dimensional_elasto-plastic_calculations_using_yield_surfaceswith_corner_discontinuities

Clausen, J. C. S., Damkilde, L. & Andersen, L. V. (2005). An efficient Return Algorithm for Non-Associated Mohr-Coulomb Plasticity. I B. H. V. Topping (red.), Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing Civil-Comp Press. https://doi.org/10.4203/ccp.81.144

Clausen, J. C., Damkilde, L. & Andersen, L. V. (2005). An efficient Return Algorithm for Non-Associated Mohr-Coulomb Plasticity. I B. H. V. Topping (red.), Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing Civil-Comp Press.

Clausen, J. C. (red.) (2019). Third Semester and Master’s Thesis Ideas 2019: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 58

Clausen, J. C. (red.) (2017). Third Semester and Master’s Thesis Ideas 2017: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 53

Clausen, J. (2009). 3rd Semester and Master's Thesis Ideas: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 9

Clausen, J. (2010). M.Sc. in Civil and Structural Engineering: 3rd Semester and Master’s Thesis Ideas 2010. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 15

Clausen, J., Damkilde, L., Paavola, J. (red.) & Freund, J. (red.) (2005). Slope Safety Calculation With A Non-Linear Mohr Criterion Using Finite Element Method. Finnish Association for Structural Mechanics.

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (red.) (2007). Efficient Finite Element Calculation of Ny . Civil-Comp Press.

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J. (red.), Finn, M. (red.) & Mattner, T. (red.) (2008). Delamination of Compressed thin Layers at Corners.

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J., Finn, M. & Mattner, T. (2008). Delamination of Compressed thin Layers at Corners. International Congress of Theoretical and Applied Mechanics.

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (2007). Efficient Finite Element Calculation of Nγ.

Clausen, J. (red.) (2011). 3rd Semester and Master’s Thesis Ideas 2011: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J. (red.) (2013). 3rd Semester and Master’s Thesis Ideas 2013: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J. C. (red.) (2016). Third Semester and Master’s Thesis Ideas 2016: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J. C. S. (2020). Mohr Envelope Elastoplasticity. Journal of Engineering Mechanics, 146(5), artikel 04020025. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001734

Clausen, J. C. S. (2020). Comment to “A method for smoothing multiple yield functions” by Wilkins, Spencer, Jain and Gencturk. Int J Numer Methods Eng. 2020; 121:434–449. International Journal for Numerical Methods in Engineering, 121(24), 5784-5788. https://doi.org/10.1002/nme.6507

Clausen, J. C. S. (2021). Consistent evaluation of slope safety factors between different strength criteria. I R. Hammah, T. Yacoub, A. McQuillan & J. Curran (red.), The Evolution of Geotech: 25 Years of Innovation (s. 429-435). CRC Press. https://www.rocscience.com/assets/resources/products/Rocscience-International-Conference-2021-Proceedings.pdf

Viser resultater 51 til 100 ud af 246

Forrige

Næste

Revideret 06.09.2022

Lars Vabbersgaard Andersen