Publications

Sortér efter: Dato | Forfatter | Titel

Zhang, Z., Høeg, C. E. & Andersen, L. V. (2019). The influence of uncertain soil conditions on the dynamic response of offshore wind turbines using an efficient time-domain model. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 257-258). CRC Press. https://doi.org/10.1201/9780429426506

Whyte, C. A., Mackie, K. R., Abbiati, G. & Stojadinovic, B. (2015). Validation of OpenFRESCO-based thermomechanical hybrid simulation to address an earthquake-fire coupled problem. I B. A. Schrefler, E. Onäte & M. Papadrakakis (red.), Proceedings of the VI International Conference on Coupled Problems in Science and Engineering (s. 290-299)

Whyte, C. A., Mackie, K. R., Abbiati, G. & Stojadinovic, B. (2016). Optimal Tuning of Thermomechanical Hybrid Simulation Parameters. I M. E. Moreyra Garlock & V. K. R. kodur (red.), Structures in Fire: Proceedings of the Ninth International Conference (s. 1055-1062). DEstech Publications.

Whyte, C. A., Mackie, K., Abbiati, G. & Stojadinovic, B. (2015). Thermomechanical hybrid simulation of an earthquake-fire-earthquake scenario. I Conference of the ASCE Engineering Mechanics Institute

Whyte, C. A., Mackie, K., Abbiati, G. & Stojadinovic, B. (2017). Selection of optimal time-scaling for thermomechanical hybrid simulation. I Proceedings of the 16th World Conference on Earthquake Engineering Artikel 1675

Vahdatirad, M. J., Griffiths, D. V., Andersen, L. V., Sørensen, J. D. & Fenton, G. A. (2014). Reliability analysis of a gravity-based foundation for wind turbines: a code-based design assessment. Geotechnique, 64(8), 635 – 645. https://doi.org/10.1680/geot.13.P.152

Uk Lim, H., Manuel, L., Persson, P. & Andersen, L. V. (2019). A surrogate model to describe uncertainties in wood floor modal frequencies. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 121-126). CRC Press. https://doi.org/10.1201/9780429426506

Tsokanas, N., Abbiati, G., Kanellopoulos, K. & Stojadinović, B. (2021). Multi-axial hybrid fire testing based on dynamic relaxation. Fire Safety Journal, 126, Artikel 103468. https://doi.org/10.1016/j.firesaf.2021.103468

T. Peplow, A., Andersen, L. V. & Persson, P. (2019). Computation of axisymmetric vibration transmission using a well-conditioned system for elastic layers over a half–space. I M. Papadrakakis & M. Fragiadakis (red.), COMPDYN 2019 - 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings (Bind 2, s. 4548-4556). National Technical University of Athens. https://2019.compdyn.org/proceedings/pdf/18695.pdf

Tondini, N., Abbiati, G., Possidente, L. & Stojadinovic, B. (2016). A Static Partitioned Solver for Hybrid Fire Testing. I M. E. Moreyra Garlock & V. K. R. Kodur (red.), Structures in Fire: Proceedings of the Ninth International Conference (s. 827-835). DEstech Publications.

Tondini, N., Abbiati, G., Possidente, L. & Stojadinovic, B. (2016). Hybrid simulation applied to fire testing: a newly conceived numerical framework. I Proceedings of the 6th European Conference of Structural Control and Health Monitoring EACS.

Tondini, N., Abbiati, G., S. Bursi, O. & Stojadinovic, B. (2017). Partitioned algorithm for hybrid fire testing up to structural collapse. I COUPLED PROBLEMS 2017 International Center for Numerical Methods in Engineering Barcelona (CIMNE).

Thomassen, K., Andersen, L. V. & Ibsen, L. B. (2016). Static Tension Tests on Axially Loaded Pile Segments in Sand. Department of Civil Engineering, Aalborg University. DCE Technical reports Nr. 206

Tarp-Johansen, N. J., Mørch, C., Andersen, L. V. & Christensen, E. D. (2009). Comparing Sources of Damping of Cross-Wind Motion. I European Offshore Wind 2009 : Conference & Exhibition The European Wind Energy Association.

Sørensen, K. D., Jensen, H. M. & Clausen, J. C. S. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45, 5867-5878.

Sørensen, K. W., Nielsen, S. K., Shajarati, A. & Clausen, J. (2012). Modified Critical State Two-Surface Plasticity Model for Sands. Department of Civil Engineering, Aalborg University.

Sneideris, J., Bucinskas, P., Agapii, L. & Andersen, L. V. (2015). Experimental Validation of a Numerical Model for Three-Dimensional High-Speed Railway Bridge Analysis by Comparison with a Small-Scale Model. I J. Kruis, Y. Tsompanakis & B. H. V. Topping (red.), Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing Artikel 127 Civil-Comp Press. https://doi.org/10.4203/ccp.108.127

Shen, C., Zhang, D., Clausen, J., Song, T., Xu, J. & Yang, S. (2023). Centrifuge modelling on the stability of emergency flood control riverbank reinforced by deep mixed column: Case Study of Baishan Junction, China. Case Studies in Construction Materials, 19, Artikel e02614. https://doi.org/10.1016/j.cscm.2023.e02614

Shanin Reza, M., S. Bursi, O., Abbiati, G. & Bonelli, A. (2013). Pseudo-Dynamic Heterogeneous Testing With Dynamic Substructuring of a Piping System Under Earthquake Loading. I ASME 2013 Pressure Vessels and Piping Conference (Seismic Engineering udg., Bind 8). Artikel PVP2013-97441 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2013-97441

S. Bursi, O., Abbiati, G. & S. Reza, M. (2014). A novel hybrid testing approach for piping systems of industrial plants. Smart Structures and Systems, 14(6), 1005-1030. https://doi.org/10.12989/sss.2014.14.6.1005

S. Bursi, O., Abbiati, G., Caracoglia, L. & Shanin Reza, M. (2014). Effects of uncertain boundary conditions on dynamic characteristics of industrial plant components. I ASME 2014 Pressure Vessels and Piping Conference: PVP 14 Artikel V008T08A028 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2014-28177

S. Bursi, O., Abbiati, G., Caracoglia, L., La Salandra, V., Di Filippo, R. & Shanin Reza, M. (2015). Dynamic Response of Coupled Tanks and Piping Systems Under Seismic Loading. I ASME 2015 Pressure Vessels and Piping Conference Artikel PVP2015-45131 American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2015-45131

S. Bursi, O., Wang, Z., Jia, C. & Abbiati, G. (2011). Novel partitioned time integration methods for real time heterogeneous testing. I IV International Conference on Advanced in Experimental Structural Engineering

S. Bursi, O., Abbiati, G., Molinari, M. & Xu, G. (2012). Use of Partitioned Time Integration Schemes for Parallel Simulations of Hybrid Systems. I 5th European Conference on Structural Control

S. Bursi, O., Abbiati, G., Xu, G. & Wu, B. (2012). Novel Partitioned Time Integration Schemes For DAE Systems Based On Generalized-Alpha Methods. I 5th European Conference on Structural Control, EACS 2012

S. Bursi, O., Abbiati, G., Wu, B. & Xu, G. (2012). Partitioned time integration methods for hybrid simulators. I 15th World Conference on Earthquake Engineering

S. Bursi, O., Abbiati, G., Cazzador, E., Ceravolo, R. & Mei, Z. (2013). Hybrid simulation of an old reinforced concrete viaduct based on nonlinear substructuring techniques. I Proc. of the 2nd Conference on Smart Monitoring Assessment and Rehabilitation of Civil Structures,

S. Bursi, O., Abbiati, G., Shahin Reza, M. & Cazzador, E. (2013). Advances in Pseudo-Dynamic Testing of Complex Structures Based on Model Reduction Techniques. I 5th International Conference on Advances in Experimental Structural Engineering

S. Bursi, O., Abbiati, G., Cazzador, E. & Mei, Z. (2013). Numerical advances in the pseudo-dynamic testing technique with non-linear substructuring applied to a reinforced concrete bridge. I Conference of the ASCE Engineering Mechanics Institute

S. Bursi, O., La Salandra, V., Abbiati, G. & Caracoglia, L. (2016). A comparison of online and offline experimental substructuring methods for the simulation of complex dynamic systems. I Proceedings of the 6th European Conference of Structural Control and Health Monitoring EACS.

S. Bursi, O., Abbiati, G., Di Filippo, R. & La Salandra, V. (2017). Online/offline dynamic substructuring methods for the seismic characterization of coupled tank-piping system response. I VII International Conference on Coupled Problems in Science and Engineering

Sauca, A., Mortensen, N., Drustrup, A. & Abbiati, G. (2021). Development of a Thermomechanical Hybrid Testing Platform for Fire Following Earthquake Simulation. I 2021 17WCEE Proceedings Artikel C001475

Rusek, J., Alibrandi, U., Słowik, L. & Chomacki, L. (2023). BNSL GOBNILP algorithm in application to damage intensity prognostic system to RC multistorey residential buildings subjected to negative impacts of the industrial environment of mines. Journal of Building Engineering , 80, Artikel 107885. https://doi.org/10.1016/j.jobe.2023.107885

Rasmussen, M. R. & Andersen, L. V. (2008). Aspects of Using CFD for Wind Comfort Modeling Around Tall Buildings. I Ö. Eren, A. Mohammed, A. Günyakti, E. Soyer & H. Bilsel (red.), Structural & Earthquake Engineering : Proceedings of the 8th International Congress on Advances in Civil Engineering, ACE 2008, Famagusta, North Cyprus, 15-17 September 2008 (Bind 4, s. 237-244). Eastern Mediterranean University Press. http://vbn.aau.dk/files/14964915/Aspects_of_Using_CFD_for_Wind_Comfort_Modeling_Around_Tall_Buildings

Rahbek, L. W., Kirkegaard, P. H. & Alibrandi, U. (2021). Parametric grid mapping design tool for freeform surfaces using a genetic algorithm. I S. A. Behnejad, G. A. R. Parke & O. A. Samavati (red.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).

Pignatta, G. & Alibrandi, U. (2022). Risk-Informed Digital Twin of Buildings and Infrastructures for Sustainable and Resilient urban communities. Journal of Risk and Uncertainty in Engineering Systems - Part A : Civil Engineering, 12(1), Artikel 10. https://doi.org/10.3390/environsciproc2021012010

Pignatta, G. & Alibrandi, U. (2021). Risk-informed Digital Twin (RDT) for the decarbonization of the built environment: the Australian residential context. I Proceedings of the 3rd Built Environment Research Forum MDPI. https://doi.org/10.3390/BERF3-12121

Persson, P., Austrell, P-E., Kirkegaard, P. H., Andersen, L. V. & Steffen, F. (2016). Analysis of wind-induced vibrations in high-rise buildings. I W. Kropp (red.), Proceedings of the 45th International Congress and Exposition on Noise Control Engineering -INTER-NOISE 2016: Towards a Quieter Future (s. 7650-7661). German Acoustical Society (DEGA). http://pub.dega-akustik.de/IN2016/data/articles/000976.pdf

Persson, P. & Andersen, L. V. (2018). Efficient finite-element analysis of the influence of structural modifications on traffic-induced building vibrations. I A. S. Cardoso, J. L. Borges, P. A. Costa, A. T. Gomes, J. C. Marques & C. S. Vieira (red.), Numerical Methods in Geotechnical Engineering IX: Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE 2018) (Bind 2, s. 1557-1564). CRC Press.

Persson, P., Frier, C., Pedersen, L., Andersen, L. V. & Manuel, L. (2019). Influence of uncertain parameters on modal properties of wood floors. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 45-46). CRC Press. https://doi.org/10.1201/9780429426506

Persson, P., Flodén, O., Danielsson, H., Peplow, A. & Andersen, L. V. (2021). Improved low-frequency performance of cross-laminated timber floor panels by informed material selection. Applied Acoustics, 179, Artikel 108017. https://doi.org/10.1016/j.apacoust.2021.108017

Peplow, A., Persson, P. & Andersen, L. V. (2021). Evaluating annoyance mitigation in the screening of train-induced noise and ground vibrations using a single-leaf traffic barrier. Science of the total Environment, 790, Artikel 147877. https://doi.org/10.1016/j.scitotenv.2021.147877

Ogrizovic, J., Abbiati, G., Stojadinović, B. & Frangi, A. (2022). Hybrid simulation of a post-tensioned timber frame and validation of numerical models for seismic design. Engineering Structures, 265, Artikel 114415. https://doi.org/10.1016/j.engstruct.2022.114415

Nielsen, S. R. K. & Andersen, L. (2002). Numerical solutions in elastodynamics and accoustics using BEM and FEM. Aalborg Universitet. U : Institut for Bygningsteknik, Aalborg Universitet Nr. U2002-1

Nielsen, S. R. K. & Andersen, L. V. (2001). Vehicle Moving on a Continuously Supported Beam with Irregular Surface. I R. B. Corotis, G. I. Schuëller & M. Shinozuka (red.), Structural Safety and Reliability Swets & Zeitlinger.

Nezhentseva, A., Andersen, T. L., Andersen, L. V. & Ibsen, L. B. (2012). Wave Forces on Transition Pieces for Bucket Foundations for Offshore Wind Turbines. Department of Civil Engineering, Aalborg University. DCE Technical Memorandum Nr. 28

Max, D., Abbiati, G., Broccardo, M., Beyer, K., Laurentiu, D., Petrovic, M., Mojsilovic, N. & Stojadinovic, B. (2017). Quantification of non-structural damage in unreinforced masonry walls induced by geothermal reservoir exploration using quasi-static cyclic tests. I 13th Canadian Masonry Symposium

mallikarjuna, B. K., Chockalingam, S., Alibrandi, U., Asmone, A. S. & Manthapuri, S. (2022). Toward Responsible Design of Low-Carbon Buildings: From Concept to Engineering. Journal of Risk and Uncertainty in Engineering Systems - Part A : Civil Engineering, 8(2), Artikel 02522001. https://doi.org/10.1061/AJRUA6.0001216

Ma, C. Y., Alibrandi, U. & Koh, C. G. (2014). Uncertainties in Effective Tension and Bending Moment of a Steel Catenary Riser under Random Wave. I Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the Sixth International Symposium on Uncertainty, Modeling, and Analysis (ISUMA American Society of Mechanical Engineers (ASME). https://doi.org/10.1061/9780784413609.256

Liu, Z. & Andersen, L. (2003). Stabilitet af flydende legemer. (s. 10).

Viser resultater 1 til 50 ud af 248

Næste

Revideret 06.09.2022

Lars Vabbersgaard Andersen