Publications by Structural Dynamics and Geotechnical Engineering

Are you looking for publications by the Section of Structural Dynamics and Geotechnical Engineering? On this page you can find all the publications made by the Section of Structural Dynamics and Geotechnical Engineering by Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Persson, P., Frier, C., Pedersen, L., Andersen, L. V. & Manuel, L. (2019). Influence of uncertain parameters on modal properties of wood floors. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 45-46). CRC Press. https://doi.org/10.1201/9780429426506

Uk Lim, H., Manuel, L., Persson, P. & Andersen, L. V. (2019). A surrogate model to describe uncertainties in wood floor modal frequencies. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 121-126). CRC Press. https://doi.org/10.1201/9780429426506

Bucinskas, P. & Andersen, L. V. (2019). Dynamic structure response using surrogate models. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 109-114). CRC Press. https://doi.org/10.1201/9780429426506

Andersen, L. V., Bucinskas, P., Nguyen, P., Manuel, L. & Persson, P. (2019). A surrogate model for vibration transmission in layered soil. I A. Zingoni (red.), Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 (s. 31-36). CRC Press. https://doi.org/10.1201/9780429426506

Knudsen, J., Sørensen, K. K., Steenfelt, J. S. & Trankjær , H. (2019). Design of bored piles in Denmark - a historical perspective. Afhandling præsenteret på XVII European Conference on Soil Mechanics and Geotechnical Engineering, Reykjavik, Island. https://doi.org/10.32075/17ECSMGE-2019-0732

Matejícka, L., Georgakis, C. T., Koss, H. & Egger, P. (2019). Preliminary comparison of the aerodynamics of several concave-filleted bridge cable surfaces. Afhandling præsenteret på The 15th International Conference on Wind Engineering, Beijing, Kina.

Matejícka, L., Georgakis, C. T., Schwarz, A. & Egger, P. (2019). Cable Surface for the Reduction of Risk Associated with Bridge Cable Ice Accretions. Structural Engineering International, 29(3), 425-432. https://doi.org/10.1080/10168664.2019.1597453

Lees, A. S. & Clausen, J. C. S. (2019). A new approach to characterise the benefit of multi-axial geogrid on soil. I The XVII European Conference on Soil Mechanics and Geotechnical Engineering https://doi.org/10.32075/17ECSMGE-2019-0409

Sørensen, E. S., Clausen, J. & Damkilde, L. (2013). Numerical Implementation of the Hoek-Brown Material Model with Strain Hardening. CRC Press. https://www.taylorfrancis.com/chapters/edit/10.1201/b15963-73/numerical-implementation-hoek-brown-material-model-strain-hardening-s%C3%B8rensen-clausen-damkilde

Knudsen, B. S., Østergaard, M. U. & Clausen, J. (2013). Implementation of a Stress-dependent Strength Material Model in PLAXIS 3D. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Implementation-of-a-Stress-dependent-Strength-Model-Knudsen-%C3%98stergaard/e9e855ea2dbfa781db5e23761e345d99cebf7bda

Clausen, J. C. (red.) (2016). Third Semester and Master’s Thesis Ideas 2016: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Koteras, A. K., Ibsen, L. B., Clausen, J. C., Chung, J. S. (red.) & Wang, H. H. (red.) (2016). Seepage Study for Suction Installation of Bucket Foundation in Different Soil Combinations. International Society of Offshore & Polar Engineers. http://www.isope.org/publications/publications.htm

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (2010). 1g Model Tests with Foundations in Sand. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Clausen, J. C. (2016). Discussion on ‘‘Bearing capacity of circular footings over rock mass by using axisymmetric quasi lower bound finite element limit analysis” by Manash Chakraborty and Jyant Kumar [Comput. Geotech. 70 (2015) 138–149]. Computers and Geotechnics, 73, 231-234. https://doi.org/10.1016/j.compgeo.2015.12.002

Sørensen, E. S., Clausen, J. C., Merifield, R. S. & Damkilde, L. (2015). Implementation of the Modified Hoek-Brown Model into the Finite Element Method. Institute of Cybernetics at Tallinn University of Technology. http://www.ioc.ee/nscm28/files/Proceedings_of_NSCM28.pdf

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2015). Finite element implementation of the Hoek-Brown material model with general strain softening behavior. International Journal of Rock Mechanics and Mining Sciences, 78, 163-174. https://doi.org/10.1016/j.ijrmms.2015.05.005

Gnaur, D. & Clausen, J. (2015). Teaching Smart with Podcasts. International Journal of Engineering Education, 31(2), 486-494.

Knudsen, B. S., Østergaard, M. U., Ibsen, L. B. & Clausen, J. (2013). Determination of p-y Curves for Bucket Foundations in Sand Using Finite Element Modeling. Department of Civil Engineering, Aalborg University. https://www.semanticscholar.org/paper/Determination-of-p-y-Curves-for-Bucket-Foundations-Knudsen-%C3%98stergaard/fe45ff20165111d29fe871b297344f574fc797f1

Clausen, J. (2013). Bearing Capacity of Circular Footings on a Hoek–Brown Material. International Journal of Rock Mechanics and Mining Sciences, 57, 34-41. https://doi.org/10.1016/j.ijrmms.2012.08.004

Clausen, J., Damkilde, L. & Schweiger, H. F. (red.) (2006). Slope Safety Factor Calculations With Non-Linear Yield Criterion Using Finite Elements. CRC Press. https://www.researchgate.net/publication/300434236_Slope_safety_factor_calculations_with_non-linear_yield_criterion_using_finite_elements

Clausen, J. (red.) (2013). 3rd Semester and Master’s Thesis Ideas 2013: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Krabbenhøft, S., Damkilde, L., Clausen, J. & Zingoni, A. (red.) (2010). 1g Model Tests with Foundations in Sand. CRC Press. https://www.semanticscholar.org/paper/1g-Model-Tests-with-Foundations-in-Sand-Krabbenh%C3%B8ft-Damkilde/f543ea2fd5835d86e49985f7438a2ad49a47abe4

Sørensen, K. W., Nielsen, S. K., Shajarati, A. & Clausen, J. (2012). Modified Critical State Two-Surface Plasticity Model for Sands. Department of Civil Engineering, Aalborg University.

Suchowerska, A. M., Merifield, R. S., Carter, J. P. & Clausen, J. (2012). Prediction of Underground Cavity Roof Collapse using the Hoek–Brown Failure Criterion. Computers and Geotechnics, 44, 93-103. https://doi.org/10.1016/j.compgeo.2012.03.014, https://doi.org/10.1016/j.compgeo.2012.03.014

Clausen, J. (2012). 3rd Semester and Master’s Thesis Ideas 2012: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. https://www.yumpu.com/en/document/view/42046457/3rd-semester-and-masters-thesis-ideas-2012-vbn-aalborg-

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2012). The Bearing Capacity of Circular Footings in Sand. Advances in Civil Engineering, 2012, Artikel 947276. https://doi.org/10.1155/2012/947276

Clausen, J. (red.) (2011). 3rd Semester and Master’s Thesis Ideas 2011: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University.

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (2007). Efficient Finite Element Calculation of Nγ.

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J., Finn, M. & Mattner, T. (2008). Delamination of Compressed thin Layers at Corners. International Congress of Theoretical and Applied Mechanics.

Sørensen, K. D., Jensen, H. M. & Clausen, J. (2008). Delamination of Compressed Thin Layers at Corners. International Journal of Solids and Structures, 45(22-23), 5867-5878. https://doi.org/10.1016/j.ijsolstr.2008.07.004

Clausen, J., Jensen, H. M., Sørensen, K. D., Denier, J. (red.), Finn, M. (red.) & Mattner, T. (red.) (2008). Delamination of Compressed thin Layers at Corners.

Clausen, J., Krabbenhoft, K., Schrefler, B. A. (red.) & Perego, U. (red.) (2008). Existence and Uniqueness of Solutions in Nonassociated Mohr-coulomb Elastoplasticity. https://www.researchgate.net/publication/238706804_Existence_and_uniqueness_of_solutions_in_nonassociated_Mohr-Coulomb_elastoplasticity

Clausen, J., Damkilde, L., Krabbenhøft, K. & Topping, B. H. V. (red.) (2007). Efficient Finite Element Calculation of Ny . Civil-Comp Press.

Clausen, J. (2007). Efficient Non-Linear Finite Element Implementation of Elasto-Plasticity for Geotechnical Problems. Esbjerg Institute of Technology, Aalborg University. https://www.semanticscholar.org/paper/Efficient-Non-Linear-Finite-Element-Implementation-Clausen/0b7b50d1e1fbff07b31982ec086d9621c1001c22

Clausen, J. C., Damkilde, L., Dahlblom, O. (red.), Fuchs, L. (red.), Persson, K. (red.), Ristinmaa, M. (red.), Sandberg, G. & Svensson, I. (2006). A Simple And Efficient FEM-Implementation Of The Modified Mohr-Coulomb Criterion. Lund Universitet. https://www.semanticscholar.org/paper/A-Simple-And-Efficient-FEM-Implementation-Of-The-Clausen-Damkilde/a87c59800833162b6053e17f4c0142c6548e2d00

Krabbenhøft, S., Clausen, J. & Damkilde, L. (2006). Tension Tests On Bored Piles In Sand. Laboratoire Central des Ponts et Chaussées.

Clausen, J., Damkilde, L., Paavola, J. (red.) & Freund, J. (red.) (2005). Slope Safety Calculation With A Non-Linear Mohr Criterion Using Finite Element Method. Finnish Association for Structural Mechanics.

Clausen, J. (2010). M.Sc. in Civil and Structural Engineering: 3rd Semester and Master’s Thesis Ideas 2010. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 15

Clausen, J. (2009). 3rd Semester and Master's Thesis Ideas: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 9

Clausen, J. & Sørensen, E. V. (2010). Simulation of Thermally Induced Stress during Hardening of Large Concrete Cubes. Department of Civil Engineering, Aalborg University. DCE Contract Reports Nr. 74

Clausen, J. & Damkilde, L. (2007). An Exact Implementation Of The Hoek–Brown Criterion For Elasto-Plastic Finite Element Calculations. International Journal of Rock Mechanics and Mining Sciences, 45(6), 831-847. https://doi.org/10.1016/j.ijrmms.2007.10.004

Clausen, J. C. (red.) (2017). Third Semester and Master’s Thesis Ideas 2017: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 53

Andersen, T. L. & Clausen, J. C. (red.) (2018). Third Semester and Master’s Thesis Ideas 2018: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 57

Clausen, J. C. (red.) (2019). Third Semester and Master’s Thesis Ideas 2019: M.Sc. in Civil and Structural Engineering. Department of Civil Engineering, Aalborg University. DCE Latest News Nr. 58

Sørensen, E. S., Clausen, J. C. & Damkilde, L. (2017). Comparison of numerical formulations for the modeling of tensile loaded suction buckets. Computers and Geotechnics, 83, 198-208. https://doi.org/10.1016/j.compgeo.2016.10.026

Tarpø, M., Friis, T., Olsen, P., Juul, M., Georgakis, C. & Brincker, R. (2019). Automated reduction of statistical errors in the estimated correlation function matrix for operational modal analysis. Mechanical Systems and Signal Processing, 132, 790-805. https://doi.org/10.1016/j.ymssp.2019.07.024

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). The effect of modal truncation and spatial distribution in load identification. I S. D. R. Amador, R. Brincker, E. I. Katsanos, M. Lopez Aenlle & P. Fernandez (red.), 8th IOMAC - International Operational Modal Analysis Conference, Proceedings (s. 553-557). International Operational Modal Analysis Conference (IOMAC). https://www.researchgate.net/publication/331319800_The_effect_of_modal_truncation_and_spatial_distribution_in_load_identification

Vigsø, M. B., Brincker, R. & Georgakis, C. T. (2019). Identifying Wave Loads During Random Seas Using Structural Response. I Proceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019 (s. 2673-2678). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331249021_Identifying_Wave_Loads_During_Random_Seas_Using_Structural_Response

Kabel, T., Georgakis, C. T. & Rod Zeeberg, A. (2019). Mapping Ocean Waves using New LIDAR Equipment. I Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference (s. 2558-2562). International Society of Offshore and Polar Engineers. https://www.researchgate.net/publication/331345622_Mapping_Ocean_Waves_using_LIDAR_Technology

Persson, P., Kallivokas, L., Andersen, L. V. & T. Peplow, A. (2019). How building adjacency affects occupant-perceivable vibrations due to urban sources: A parametric study. I M. Papadrakakis & M. Fragiadakis (red.), Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (Bind 3, s. 5610-5621). National Technical University of Athens. https://doi.org/10.7712/120119.7331.18833

Viser resultater 201 til 250 ud af 577

Forrige

Næste

Back to the main page

Revideret 18.09.2024

AU Engineering