Institut for Byggeri og Bygningsdesign

Aarhus Universitets segl

Publications by Building Science

Are you looking for publications by the Section of Building Science? On this page you can find all the publications made by the Section of Building Science - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sortér efter: Dato | Forfatter | Titel

Kamari, A. & Schultz, C. P. L. (2025). Streamlining BIM-integrated LCA for rapid-iterative-informed-early stage upfront carbon assessment by architects and engineers. Architecture, Structures and Construction, 5(1), Artikel 5. https://doi.org/10.1007/s44150-024-00122-2
Al-Khiami, M. I., Lindhard, S. & Wandahl, S. (2026). Integrating exoskeletons in the construction sector: a systematic review of empirical evaluation tools and future directions. Engineering, Construction and Architectural Management, 33(3), 2364-2399. https://doi.org/10.1108/ECAM-05-2024-0563
Rong, L., Kristensen, J. K., Jung, S., Zhang, G., Kobek-Kjeldager, C., Thodberg, K., Foldager, L. & Herskin, M. S. (2024). Air temperature measured by embedded sensors adopted by pig transporting vehicles in a scaled compartment model. I Book of Abstracts of the 75th Annual Meeting of the European Federation of Animal Science (s. 783-783). Artikel Session 70, Poster 13 Wageningen Academic Publishers.
Kristoffersen, A. E. & Kamari, A. (2024). Towards (quantitative) Environmental Life Cycle Assessment of Socially Oriented Design Intents. Poster-session præsenteret på international conference on Decarbonising the Building Industry, Melbourne, Australien.
Chen, G., Zhang, G. & Rong, L. (2024). Predictive models of air temperatures inside a naturally ventilated vehicle transporting weaner pigs. Computers and Electronics in Agriculture, 227, Artikel 109591. https://doi.org/10.1016/j.compag.2024.109591
Yang, Y., Zhang, G. & Rong, L. (2024). Temperature adaptive passive daytime radiative cooling: The impact of their essential properties on energy performance of different building types. Energy and Buildings, 325, Artikel 114955. https://doi.org/10.1016/j.enbuild.2024.114955
Yang, Q., Bai, X., Zhang, G., Rong, L., Tao, Y., Tu, J., Wang, J., Hu, Z., Chai, J. & Wang, Y. (2024). Scaled experimental study of a ventilation system featuring partition jet and pit exhaust. Biosystems Engineering, 248, 206-217. https://doi.org/10.1016/j.biosystemseng.2024.10.010
Foldager, L., Thodberg, K., Chen, G., Kristensen, J. K., Jensen, L. D., Kaiser, M., Kobek-Kjeldager, C., Rong, L. & Herskin, M. S. (2024). Effects of deck height during transport of weaners: in-vehicle conditions and clinical indicators. I Book of Abstracts of the 75th Annual Meeting of the European Federation of Animal Science (s. 487-487). Artikel Session 38, Poster 12 Wageningen Academic Publishers.
Chen, G., Zhang, G. & Rong, L. (2024). Verifying the reliability of CFD domain decomposition technique on modelling the airflow field inside a naturally ventilated cattle barn. Biosystems Engineering, 248, 156-161. https://doi.org/10.1016/j.biosystemseng.2024.10.001
Kamari, A. (2024, okt. 30). Reflections on the Integration of the New Generation of AI/GAI-powered Digital Tools in Architectural Design Practice. LinkedIn. https://www.linkedin.com/pulse/reflections-integration-new-generation-aigai-powered-digital-kamari-pfngf/?trackingId=hX0s%2BqMITDmktl616vquOg%3D%3D
Martinez Ribon, J. G. T., Perez, C. T., Wandahl, S. & Salling, S. T. (2024). Evaluating the feasibility of smartwatches for allocating workers' time into workspaces on jobsites. I Proceedings of the 41st International Conference of CIB W78 CIB.
Karimi , F. & Kamari, A. (2024). Adapting Sustainability Certification Systems for Historic Buildings: A Qualitative Comparative Study in Denmark. Sustainability, 16(20), Artikel 8922. https://doi.org/10.3390/su16208922
Badamchizadeh, P., Saadatjoo, P., Ahmadlouydarab, M. & Zhang, G. (2024). Evaluating the impact of urban multifunctional walls on pedestrian wind comfort on street sidewalks (Case study: Tabriz City). Wind and Structures, 39(3), 223-242. https://doi.org/10.12989/was.2024.39.3.223
Chen, G., Kobek-Kjeldager, C., Jensen, L. D., Kristensen, J. K., Kaiser, M., Thodberg, K., Zhang, G., Rong, L., Herskin, M. S. & Foldager, L. (2024). Experimental study on temperature difference between the interior and exterior of the vehicle transporting weaner pigs. Biosystems Engineering, 247, 119-131. https://doi.org/10.1016/j.biosystemseng.2024.09.001
Knudsen, M. D., Fiorentini, M. & Petersen, S. (2024). A heat-measurement-free strategy for Economic Model Predictive Control of hydronic radiators. Journal of Building Engineering , 97, Artikel 110694. https://doi.org/10.1016/j.jobe.2024.110694
Li, J., Hudert, M. M. & Andersen, L. V. (2024). A study of internal stiffeners in wooden slab panels obtained by topology optimisation. I Proceedings of the IASS 2024 Symposium: Redefining the Art of Structural Design International Association for Shell and Spatial Structures (IASS).
Al-Khiami, M. I., Lindhard, S. M. & Wandahl, S. (2024). Charting the Exoskeleton Industry: A Comprehensive Insight into Dynamics and Trends. I 12th Nordic Conference on Construction Economics and Organisation (1 udg., Bind 1389) https://doi.org/10.1088/1755-1315/1389/1/012014
Martinez Ribon, J. G. T., F Alarcon, L. & Wandahl, S. (2024). Unmanned Aerial Systems (UAS)-Derived 3D Models for Digital Twin Construction Applications. I C. Şahin (red.), Applications of Point Cloud Technology InTechOpen. https://doi.org/10.5772/intechopen.1004746
Wandahl, S., Perez, C. T. & Salling, S. T. (2024). Construction Workers’ Perception of Project Management, Work Environment, and Health & Safety. I 12th Nordic Conference on Construction Economics and Organisation (1 udg., Bind 1389) https://doi.org/10.1088/1755-1315/1389/1/012039
Pedersen, K. B., Stefankovics, G., Plamenov Nachev, S. & Wandahl, S. (2024). Quantifying and Planning Carbon Emissions in Construction With Location-Based Scheduling. I Proceedings of the 32nd Annual Conference of the International Group for Lean Construction (IGLC32) (Bind 32, s. 416–427) https://doi.org/10.24928/2024/0175
Perez, C. T., Salling, S. T. & Wandahl, S. (2023). Location-based Work Sampling. Lean Construction , 2023.
Zhang, Q., Duan, J., Zhu, Z., Rong, L., Lin, X., Dong, H. & Liu, D. (2024). Tuning oxygen vacancies via photoinduced defect engineering in plasma pre-treated TiO2 for efficient solar-light-driven oxidation of trace methane. Chemical Engineering Journal, 497, Artikel 154681. https://doi.org/10.1016/j.cej.2024.154681
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Ringparken.
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Bartholin.
Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Holbergshaven.
Perez, C. T., Wandahl, S. & Arieldsen, M. (2024). RELATIONSHIP BETWEEN TIME SPENT IN PRODUCTION WORK ACTIVITIES AND PRODUCTION WORKSPACES. I Proceedings of the 32nd Annual Conference of the international Group for Lean Construction (IGLC 32) (Bind 32, s. 454-465) https://doi.org/10.24928/2024/0189
Perez, C. T., Madushanka, M., Loyola, L., Ergul, M., Salling, S. T. & Wandahl, S. (2024). The impact of Lean Knowledge and Lean Operation on construction workers’ job satisfaction. I IGLC 32 - Auckland, New Zealand 2024 (Bind 32, s. 1195-1206) https://doi.org/10.24928/2024/0188
Jahangir, M. F., Kamari, A. & Schultz, C. P. L. (2024). Developing A Building Simulation Identity Card for Enhanced Safety and Collaboration in Emergency Evacuation Simulations. I M. Srećković, M. Kassem, R. Soman & A. Chassiakos (red.), Proceedings of the 2024 European Conference on Computing in Construction (s. 128-135) https://doi.org/10.35490/EC3.2024.199, https://doi.org/10.35490/EC3.2024.199
Zayed, Y. N. H., Kristoffersen, A. E., Lohm, G., Kamari, A. & Schultz, C. P. L. (2024). The Anatomy of an Architect´s Argument: Formally Capturing Socially-Oriented Design Intentions in the Built Environment. I M. Srećković, M. Kassem, R. Soman & A. Chassiakos (red.), Proceedings of the 2024 European Conference on Computing in Construction (s. 268-275) https://doi.org/10.35490/EC3.2024.186
Pedersen, J., Hafner, S. D., Pacholski, A. S., I. Karlsson, V., Rong, L., Labouriau, R. & Kamp, J. N. (2024). Evaluation of optimized flux chamber design for measurement of ammonia emission after field application of slurry with full-scale farm machinery. Atmospheric Measurement Techniques, 17(14), 4493–4505. https://doi.org/10.5194/amt-17-4493-2024
Zhang, W., Yang, R., Choi, C. Y., Rong, L., Zhang, G., Wang, K. & Wang, X. (2024). Recent research and development of individual precision cooling systems for dairy cows – A review. Computers and Electronics in Agriculture, 225, Artikel 109248. https://doi.org/10.1016/j.compag.2024.109248
Gabel, C., Elholm, G., Petersen, S. & Sigsgaard, T. (2024). The prevalence and association of measured and perceived indoor air quality, housing characteristics, and residents’ behavior and health. Frontiers in Environmental Health, 3, Artikel 1358546. https://doi.org/10.3389/fenvh.2024.1358546
Yang, Y., Zhang, G. & Rong, L. (2024). Cooling energy savings from passive daytime radiative cooling in Europe: A comparative analysis with and without population weighting from open-source data, with additional comparisons to Chinese cities. Energy Conversion and Management, 314, Artikel 118616. https://doi.org/10.1016/j.enconman.2024.118616
Yang, R., Y. Choi, C., Rong, L., Zhang, G. & Wang, X. (2024). Assessment of spray nozzles on water distribution on cow's surface and efficiency of water utilization by CFD. Computers and Electronics in Agriculture, 222, Artikel 109049. https://doi.org/10.1016/j.compag.2024.109049
Yu, X., Georges, L., Knudsen, M. D., Sartori, I. & Imsland, L. (2019). Investigation of the model structure for low-order grey-box modelling of residential buildings. I V. Corrado, E. Fabrizio, A. Gasparella & F. Patuzzi (red.), 16th International Conference of the International Building Performance Simulation Association, Building Simulation 2019 (s. 5076-5083). International Building Performance Simulation Association.
Kristoffersen, A. E., Schultz, C. P. L. & Kamari, A. (2024). A critical comparison of concepts and approaches to social sustainability in the construction industry. Journal of Building Engineering , 91, Artikel 109530. https://doi.org/10.1016/j.jobe.2024.109530
Karlsson, V. I., Jónsson, Ó. Þ. & Rong, L. (2025). Airflow network modelling of a virtually renovated school to study the optimal design and regulation of ventilation systems in Iceland. I Proceedings of RoomVent 2024 (Bind 672). Federation of European Heating and Air-Conditioning Associations, REHVA. https://doi.org/10.1051/e3sconf/202567201004
Bugenings, L. A., Ostmann, P., Kamari, A. & Rong, L. (2025). Experimental measurement and validation of louvred opening for ventilation. I Proceedings of RoomVent 2024 (Bind 672). Federation of European Heating and Air-Conditioning Associations, REHVA. https://doi.org/10.1051/e3sconf/202567202011
Zhang, G., Li, Z., Guo, Z. & Charalampopoulos, D. (2024). Comparative extraction of melon seed (Cucumis melo L.) oil by conventional and enzymatic methods: physicochemical properties and oxidative stability. Journal of Agriculture and Food Research, 16, Artikel 101182. https://doi.org/10.1016/j.jafr.2024.101182
Chen, G., Zhang, G., Bjerg, B., Pedersen, P., Jensen, T. & Rong, L. (2024). CFD investigation on a novel pen partition-attached jet air supply for mitigating heat stress among lactating sows. Computers and Electronics in Agriculture, 220, Artikel 108840. https://doi.org/10.1016/j.compag.2024.108840
Hagsten, L. G. (2023). Required anchorage length of reinforcement in circular foundation subjec-ted by a centrally located normal force and supported by a uniformly distributed reaction. Bygningsstatiske Meddelelser, 93(2), 1-12. https://www.dssse.dk/wp-content/uploads/2024/03/DSSSE-foundation-no-3.pdf
Hagsten, L. G. (2023). Point Foundation. Lower Bound Solution for Distributed Load. Bygningsstatiske Meddelelser, 93(1). https://www.dssse.dk/wp-content/uploads/2024/01/DSSSE-foundation-no-2a.pdf
Hagsten, L. G., van Logtestijn, M. & Laustsen, H. H. (2022). Point foundation. Upper and lower bound solution for point load and upper bound solution for distributed load. Bygningsstatiske Meddelelser, 92(2), 1-13.
Hagsten, L. G., Fisker, J., Svarre, C. & Frandsen, T. (2022). On the influence of transverse reinforcement type and layout on the shear capacity of thin-weed concrete beams. Bygningsstatiske Meddelelser, 92(2), 15-29. Artikel 92-2.
Marszal-Pomianowska, A., Motoasca, E., Pothof, I., Felsmann, C., Heiselberg, P., Cadenbach, A., Leusbrock, I., O'Donovan, K., Petersen, S. & Schaffer, M. (2024). Strengths, weaknesses, opportunities and threats of demand response in district heating and cooling systems: From passive customers to valuable assets. Smart Energy, 14, Artikel 100135. https://doi.org/10.1016/j.segy.2024.100135
Brandt, P., Bjerg, B., Pedersen, P., Jensen, T., Rong, L. & Zhang, G. (2024). The effect of increased air velocity on respirations rate and resting behavior in gestating sows on moderately warm summer days. Livestock Science, 282, Artikel 105431. https://doi.org/10.1016/j.livsci.2024.105431
Andersen, S. C., Petersen, S., Ryberg, M., Molander, L. L. & Birkved, M. (2024). Ten questions concerning absolute sustainability in the built environment. Building and Environment, 251, Artikel 111220. https://doi.org/10.1016/j.buildenv.2024.111220
Jahangir, M. F., Schultz, C. P. L. & Kamari, A. (2024). A review of drivers and barriers of Digital Twin adoption in building project development processes. Journal of Information Technology in Construction, 29, 141-178. https://doi.org/10.36680/j.itcon.2024.008
Yang, Y., Zhang, G. & Rong, L. (2024). Assessing energy saving potential of wavelength-dependent passive daytime radiative cooler implemented with EnergyPlus by a roof model. Heliyon, 10(5), Artikel e26428. https://doi.org/10.1016/j.heliyon.2024.e26428
Jacobsen, E. L., Teizer, J., Wandahl, S. & Brilakis, I. (2024). Probabilistic forecasting of construction labor productivity metrics. Journal of Information Technology in Construction, 24, 58-83. https://doi.org/10.36680/j.itcon.2024.004

Viser resultater 101 til 150 ud af 1095

Forrige

1

2

3

4

5

6

7

8

9

10

Næste

  • Back to the main page
Revideret 13.11.2025
-
AU Engineering