Publikationer

Under publikationsliste finder du en samlet liste over de publikationer, som er lavet af medarbejdere ved Institut for Byggeri og Bygningsdesign.

Publikationsliste

Sortér efter: Dato | Forfatter | Titel

Bjerg, B., Zhang, G. & Kai, P. (2008). CFD Investigation of a Partly Pit Ventilation System as Method to Reduces Ammonia Emission from Pig Production Units. I Proceedings of the Eighth International Livestock Symposium ILES8. https://www.academia.edu/30198136/CFD_Investigation_of_a_Partly_Pit_Ventilation_System_as_Method_to_Reduce_Ammonia_Emission_from_Pig_Production_Units

Shen, C., Zhang, D., Clausen, J., Wan, Y. & Zhang, G. (2025). Centrifuge Model Tests on Deformation Characteristics of River Embankments Improved by Circular and Grid-Form Deep Mixed Columns. International Journal of Civil Engineering, 23(8), 1503-1520. https://doi.org/10.1007/s40999-025-01103-2

Shen, C., Zhang, D., Clausen, J., Song, T., Xu, J. & Yang, S. (2023). Centrifuge modelling on the stability of emergency flood control riverbank reinforced by deep mixed column: Case Study of Baishan Junction, China. Case Studies in Construction Materials, 19, Artikel e02614. https://doi.org/10.1016/j.cscm.2023.e02614

Tsai, M. H., Tsai, C. C., Hung, W. Y., Prada-Sarmiento, L. F. & Wichtmann, T. (2025). Centrifuge modeling and p-y curve characterization of large-diameter monopile embedded in low-plasticity soft clay under monotonic and long-term horizontal cyclic loading. Ocean Engineering, 338, Artikel 121970. https://doi.org/10.1016/j.oceaneng.2025.121970

Shi, X. & Wu, M. (2025). Cement degradation in CO2-saturated water and the impact of liquid to solid ratio: an experimental and thermodynamic modelling study. Afhandling præsenteret på 12th International Conference on Fracture Mechanics for Concrete and Concrete Structures, Veinna. https://doi.org/10.21012/FC12.1289

Shi, X. & Wu, M. (2023). Cement Degradation Caused Risks for Geological Carbon Sequestration Reservoirs. Afhandling præsenteret på 16th International Conference on Durability of Building Materials and Components, Beijing, Kina. https://doi.org/10.23967/c.dbmc.2023.022

Lerche, J., Lindhard, S., Enevoldsen, P., Neve, H. H., Møller, D. E., Jacobsen, E. L., Teizer, J. & Wandahl, S. (2023). Causes of delay in offshore wind turbine construction projects. Production Planning & Control, 34(15), 1513-1526. https://doi.org/10.1080/09537287.2022.2026673

Lerche, J., Neve, H. H., Wandahl, S. & Gross, A. (2022). Categorization of the Offshore Wind Production System. International Journal of Operational Research, 43(3), 299-317. https://doi.org/10.1504/IJOR.2022.122338

Wu, M. (2023). Carbon(ate) cement: dream or reality?. Abstract fra WASCON2023–Innovative Valorization of Alternative Materials and Wastes towards Circular Construction, Hong Kong, Kina.

Hagsten, L. G. & Fisker, J. (2021). Capacity assessment of the Örnsköldsvik Bridge on the basis of plastic analysis. Bygningsstatiske Meddelelser, 91(1), 11-19. Artikel 1. https://www.dsby.dk/media/dsbypdf/2021/BSM%2088%20-%20May%202021.pdf

Afarini Fard, M., Farhad, D., Georgakis, C. T. & Andersen, L. V. (2023). Capacity assessment of segment-to-segment joints in precast unbonded segmental bridge decks under vertical seismic mainshock and aftershocks. Structures, 55, 2358-2369. https://doi.org/10.1016/j.istruc.2023.06.011

Purup, P. B., Petersen, S., Ferguson Dunn, A., Gkaintazi-Masouti, M. & Visa, O. (2020). Building Performance Simulation Supporting Typical Design Activities: The Case Of ‘Volume Massing’. 770-775. Afhandling præsenteret på 35th Passive Low-Energy Architecture (PLEA), Coruna, Spanien. https://www.researchgate.net/publication/344404638_Building_Performance_Simulation_Supporting_Typical_Design_Activities_The_Case_of_'Volume_Massing'

Hamdan, M., Moradi, H., Saadatjoo, P., Murtala, M. & Mirzaei, P. (2026). Building Cooling Energy Retrofitting in Urban Context Through Multi-scale Environmental Simulation. I B. Nagy & Z. Szalay (red.), Proceedings of CESBP 2025 - 6th Central European Symposium on Building Physics (s. 423-436). Springer Science+Business Media. https://doi.org/10.1007/978-3-032-14019-7_31

Q. Hamdan, M., Gillott, M., Calautit, J. & Mirzaei, P. A. (2026). Building community energy retrofitting in urban neighbourhoods: A novel conceptual paradigm. Energy and Buildings, 353, Artikel 116897. https://doi.org/10.1016/j.enbuild.2025.116897

Kristoffersen, A. E., Schultz, C. P. L. & Kamari, A. (2026). Bridging social intents and environmental impacts through eLCA on building renovation cases. International Journal of Construction Management, 1-19. Advance online publication. https://doi.org/10.1080/15623599.2026.2619670

Salling, S., Perez, C. T. & Wandahl, S. (2022). Breakdown Work Sampling. I Proceedings of the 30th Annual Conference of the International Group for Lean Construction (IGLC) (s. 223-234). IGLC. https://doi.org/10.24928/2022/0125

Irani, N., Tafili, M., Prada-Sarmiento, L. F. & Wichtmann, T. (2024). Breakage Indices for Constitutive Models to Track the Evolution of Particle Crushing Under Continuous Shearing. Geotechnical and Geological Engineering, 42(6), 5363-5373. https://doi.org/10.1007/s10706-024-02804-6

Sun, T., Wang, X., Wang, J., Pang, S. D., Ashour, A., Ma, W., Wang, Y. & Han, B. (2026). Bond enhancement and mechanisms of corroded steel rebar-concrete interface through nano-engineering. Construction and Building Materials, 541, Artikel 147759. https://doi.org/10.1016/j.conbuildmat.2026.147759

Rusek, J., Alibrandi, U., Słowik, L. & Chomacki, L. (2023). BNSL GOBNILP algorithm in application to damage intensity prognostic system to RC multistorey residential buildings subjected to negative impacts of the industrial environment of mines. Journal of Building Engineering , 80, Artikel 107885. https://doi.org/10.1016/j.jobe.2023.107885

Wang, T. & Wu, M. (2026). Biomineralization-based calcium carbonate formation for the valorization of calcium-containing wastes into construction materials. Journal of Sustainable Cement-Based Materials. Advance online publication. https://doi.org/10.1080/21650373.2026.2693901

Martinez, A., DeJong, J., Akin, I., Aleali, A., Arson, C., Atkinson, J., Bandini, P., Baser, T., Borela, R., Boulanger, R., Burrall, M., Chen, Y., Collins, C., Cortes, D., Dai, S., DeJong, T., Del Dottore, E., Dorgan, K., Fragaszy, R. ... Zheng, J. (2022). Bio-inspired Geotechnical Engineering: principles, current work, opportunities and challenges. Geotechnique, 72(8), 687-705. https://doi.org/10.1680/jgeot.20.P.170

Bugenings, L. A. & Kamari, A. (2022). Bioclimatic Architecture Strategies in Denmark: A Review of Current and Future Directions. Buildings, 12(2), Artikel 224. https://doi.org/10.3390/buildings12020224

Johansen, K. W., Schultz, C. P. L. & Teizer, J. (2022). BIM-based fall hazard ontology and benchmark model for comparison of automated prevention through design approaches in construction safety. I J. Teizer & C. P. Leslie Schultz (red.), Proceedings of the 29thEG-ICE International Workshop on Intelligent Computing in Engineering (s. 408-417) https://doi.org/10.7146/aul.455.c231

Osterhaus, W. & Cornelius, W. (2020). Beleuchtung mit Tageslicht. I D. Seifert & M. Barfuss (red.), Beleuchtungstechnik: Grundlagen (5. Auflage udg., s. 445-475). Huss Medien.

Abbiati, G. & Sauder, T. (2021). Bayesian experimental design of cyber-physical tests for hydrodynamic model calibration. I Ocean Engineering Artikel V006t06a032 American Society of Mechanical Engineers. https://doi.org/10.1115/OMAE2021-60490

Johansen, K. W., Pimentel de Figueiredo, R., Golovina, O. & Teizer, J. (2021). Autonomous Safety Barrier Inspection in Construction: An Approach Using Unmanned Aerial Vehicles and SafeBIM. I C. Feng, T. Linner & I. Brilakis (red.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021 (s. 629-636) https://doi.org/10.22260/ISARC2021/0085

Jacobsen, E. L. (2024). Automating the Monitoring of Construction Labor Operations Using Wearable Sensors and Machine Learning. [Ph.d.-afhandling, Aarhus Universitet]. Aarhus Universitet.

Jacobsen, E. L. & Teizer, J. (2022). Automating the Estimation of Productivity Metrics for Construction Workers Using Deep Learning and Kinematics. I J. Teizer & C. P. Leslie Schultz (red.), Proceedings of the 29th EG-ICE International Workshop on Intelligent Computing in Engineering (s. 418-427) https://doi.org/10.7146/aul.455.c232

Priou, J., Gres, S., Perrault, M., Guerineau, L. & Döhler, M. (2022). Automated uncertainty-based extraction of modal parameters from stabilization diagrams. I C. E. Ventura, M. Motamedi, A. Mendler & M. Aenlle-Lopez (red.), 9th IOMAC International Operational Modal Analysis Conference, Proceedings (s. 400-410). International Operational Modal Analysis Conference (IOMAC).

Priou, J., Greś, S., Mendler, A., Perrault, M., Guerineau, L. & Döhler, M. (2024). Automated Uncertainty-Based Clustering and Tracking of Modal Parameters Under Strong Variations. I C. Rainieri, C. Gentile & M. Aenlle López (red.), Proceedings of the 10th International Operational Modal Analysis Conference, IOMAC 2024 - Volume 1 (s. 581-588). Springer Science+Business Media. https://doi.org/10.1007/978-3-031-61421-7_56

Harichandran, A. & Teizer, J. (2022). Automated Recognition of Hand Gestures for Crane Rigging using Data Gloves in Virtual Reality. I Proceedings of the 39th International Symposium on Automation and Robotics in Construction, ISARC 2022 (s. 304-311). International Association for Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2022/0043

Johansen, K. W., Nielsen, R., Schultz, C. & Teizer, J. (2021). Automated activity and progress analysis based on non-monotonic reasoning of construction operations. Smart and Sustainable Built Environment, 10(3), 457-486. https://doi.org/10.1108/SASBE-03-2021-0044

Beatini, V. & Dias, M. A. (2022). A unifying approach to kinetic structures composed by bar or plate 4R-linkages. Extreme Mechanics Letters, 55, Artikel 101833. https://doi.org/10.1016/j.eml.2022.101833

A.E. , D., Franza, A. & Sørensen, K. K. (2024). A t-z approach for the design of axially loaded piles in consolidating soil. I Geotechnical Engineering Challenges to Meet Current and Emerging Needs of Society: Proceedings of the XVIII ECSMGE 2024 (s. 448-451). CRC Press. https://doi.org/10.1201/9781003431749-60

Schmüdderich, C., Herz, C., Albared, A., Machaček, J., Prada-Sarmiento, L. F., Staubach, P. & Wichtmann, T. (2025). A two-step dynamic FEM-FELA approach for seismic slope stability assessment. Acta Geotechnica, 20(1), 303-322. Artikel 103687. https://doi.org/10.1007/s11440-024-02443-4

Huang, T., Rong, L., Zhang, G., Brandt, P., Bjerg, B. S., Pedersen, P. & Granath, S. W. L. (2021). A two-node mechanistic thermophysiological model for pigs reared in hot climates: Part 1: Physiological responses and model development. Biosystems Engineering, 212, 302-317. https://doi.org/10.1016/j.biosystemseng.2021.08.024

Huang, T., Rong, L., Zhang, G., Brandt, P., Bjerg, B. S., Pedersen, P. & Granath, S. W. L. (2021). A two-node mechanistic thermophysiological model for pigs reared in hot climates: Part 2: Model performance assessments. Biosystems Engineering, 212, 318-335. https://doi.org/10.1016/j.biosystemseng.2021.08.021

Xie, Y. & Luo, Q. (2023). Atomistic insights into the effect of temperature on capillary transport of water molecules in epoxy-modified calcium silicate hydrate nanopore: diffusion, kinetics, and mechanism. Journal of Materials Science, 58(37), 14773-14787. https://doi.org/10.1007/s10853-023-08952-z

Ferrulli, F., Silari, M., Thomsen, F. & Zorloni, G. (2021). A thermal neutron source for the CERN radiation Calibration Laboratory. Applied Radiation and Isotopes, 178, Artikel 109977. https://doi.org/10.1016/j.apradiso.2021.109977

Jensen, S. R., Kirkegaard, P. H., Postiglione, G. & Strange, A. (2019). A tectonic aproach to energy renovation of dwellings: the case of Gellerup. I P. J. S. Cruz (red.), Structures and architecture: bridging the gap and crossing borders (s. 99-108). CRC Press. https://books.google.dk/books?id=mQSiDwAAQBAJ&pg=PA99&dq=%22A+tectonic+approach+to+energy+renovation+of+dwellings+-+The+case+of+Gellerup%22&hl=da&sa=X&ved=0ahUKEwiV5sToye7mAhVRLFAKHaE5CzgQ6AEIJzAA#v=onepage&q=%22A%20tectonic%20approach%20to%20energy%20renovation%20of%20dwellings%20-%20The%20case%20of%20Gellerup%22&f=false

Mølmen, I., Grim, H. L., Jacobsen, E. L. & Teizer, J. (2021). Asymmetrical Multiplayer Serious Game and Vibrotactile Haptic Feedback for Safety in Virtual Reality to Demonstrate Construction Worker Exposure to Overhead Crane Loads. I C. Feng, T. Linner & I. Brilakis (red.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021 (s. 613-620) https://doi.org/10.22260/ISARC2021/0083

Shewale, A., Mokhade, A., Funde, N. & Bokde, N. D. (2022). A Survey of Efficient Demand-Side Management Techniques for the Residential Appliance Scheduling Problem in Smart Homes. Energies, 15(8), Artikel 2863. https://doi.org/10.3390/en15082863

Wu, M. (2025). A study on two methods to strengthen cement-based materials. Afhandling præsenteret på 4th International Conference of Sustainable Building Materials , Eindhoven, Holland.

He, X., Franza, A., Luo, X., Jiang, N. & Yin, Y. (2024). A study of pile row barriers close to the retaining wall of a deep excavation to protect existing tunnels: physical testing and a case history. Bulletin of Engineering Geology and the Environment, 83(10), Artikel 416. https://doi.org/10.1007/s10064-024-03914-4

Li, J., Hudert, M. M. & Andersen, L. V. (2024). A study of internal stiffeners in wooden slab panels obtained by topology optimisation. I Proceedings of the IASS 2024 Symposium: Redefining the Art of Structural Design International Association for Shell and Spatial Structures (IASS).

Hasan, N. M. S., Shaurdho, N. M. N., Basit, M. A., Paul, S. C., Sobuz, M. H. R. & Miah, M. J. (2023). Assessment of the rheological and mechanical properties of palmyra fruit mesocarp fibre reinforced eco-friendly concrete. Construction and Building Materials, 407, Artikel 133530. https://doi.org/10.1016/j.conbuildmat.2023.133530

Yang, R., Y. Choi, C., Rong, L., Zhang, G. & Wang, X. (2024). Assessment of spray nozzles on water distribution on cow's surface and efficiency of water utilization by CFD. Computers and Electronics in Agriculture, 222, Artikel 109049. https://doi.org/10.1016/j.compag.2024.109049

Irani, N., Prada-Sarmiento, L. F., Tafili, M., Salimi, M., Wichtmann, T. & Triantafyllidis, T. (2025). Assessment of Free Energy Functions for Sand. International Journal for Numerical and Analytical Methods in Geomechanics, 49(1), 132-150. https://doi.org/10.1002/nag.3852

Brandt, E. S., Trankjær , H., Mortensen, N. & Sørensen, K. K. (2024). ASSESSING UNDRAINED SHEAR STRENGTH IN DANISH MARINE GYTTJA: INSIGHTS FROM FIELD VANE TESTS AND PLATE LOAD TESTS. I 19th Nordic Geotechnical Meeting https://www.ngm2024.se/Papers/assessing%20undrained%20shear%20strength%20in%20danish%20marine%20gyttja%20insights%20from%20field%20vane%20tests%20and%20plate%20load%20tests.pdf

Sørensen, A. & Petersen, S. (2022). Assessing Thermal Comfort in Nursing Home Using Heart Rate Measurement.. Afhandling præsenteret på Clima 2022 the 14th Rehva world congress, Rotterdam, Holland. https://doi.org/10.34641/clima.2022.177

Viser resultater 601 til 650 ud af 751

Forrige

Næste

Revideret 13.11.2025

AU Engineering