Publications by Structural Engineering

Are you looking for publications by the Section of Structural Engineering? On this page you can find all the publications made by the Section of Structural Engineering - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Wei, R., Wang, T. & Wu, M. (2025). The potential to transfer deposited scale into a competent barrier component in CO₂ storage reservoirs: A study on in-situ consolidation of low-strength carbonate composite. Journal of Cleaner Production, 535, Article 147109. https://doi.org/10.1016/j.jclepro.2025.147109

Zhang, X., Zhang, J., Feng, Q. & Luo, Q. (2025). Are all non-kaolinitic phases detrimental to LC³ performance? Effects of mineral type, particle size, and mechanochemical activation. Construction and Building Materials, 500, Article 144182. https://doi.org/10.1016/j.conbuildmat.2025.144182

Franza, A., Ali, A. G. J. & Ehlers, S. B. (2025). Semi-analytical model for three-dimensional tunnelling-induced movements in undrained soil. Abstract from ECCOMAS Thematic Conference on Computational Methods and Information Models in Tunneling , Vienna.

Klar, A., Franza, A., von Solms, N., Lev Yehudi, O., Minh Tang, A., Llabjani, Q., Dalmazzone, D. & Laloui, L. (2025). Required Research Steps Towards the Realization of CO2-Hydrate Geo-Capsules for Underground Mechanical Energy Storage. https://hal.science/hal-05344043/

Franza, A., Sørensen, K. K. & Stutz, H. H. (2025). Pumped underground hydroelectric energy storage system in sand: an overview of the field trials in Foulum, Denmark. Abstract from 3rd International Conference on Energy Geotechnics 2025, Paris. https://hal.science/hal-05344040

Wu, M. (2025). An Effective and Practical Self-healing Concept for Cement-based Materials. Abstract from 5th International Conference on the Chemistry of Construction Materials, Garching, Germany.

Wei, R., Alfaro, E., Wang, T. & Wu, M. (2025). Optimizing In-Situ Strengthening of Low-Strength Porous Mortar Using a Definitive Screening Design Study. Paper presented at The 2nd International Conference on Net-Zero Built Environment: Innovations in Materials, Structures, and Management, Cape Town, South Africa.

Franza, A. & Sorrentino, G. (2025). Experimental study of sugar-induced sand cementation in dry conditions. Geomechanics for Energy and the Environment, 44, Article 100765. https://doi.org/10.1016/j.gete.2025.100765

Xiong, G., Guo, X., Cundy, A., Hashem, F. S. & Wu, M. (2025). Understanding the new-to-old interfacial bonding mechanism of geopolymer for concrete repair: Insight into effects of surface moisture of substrate. Construction and Building Materials, 493, Article 143201. https://doi.org/10.1016/j.conbuildmat.2025.143201

Gil, S., Baş, E. E., Jensen, C. D., Engelsgaard, S., Abbiati, G. & Gomes, C. (2025). FMI-Based Distributed Co-Simulation with Enhanced Security and Intellectual Property Safeguards.

Talasila, P., Tcherniak, D., Jensen, A. M. D., Mahato, S., Schörghofer-Queiroz, A., Ulriksen, M. D., Abbiati, G., Larsen, P. G. & Damkilde, L. (2025). Structural Health Monitoring of Engineering Structures Using Digital Twins: A Digital Twin Platform Approach. In Á. Cunha & E. Caetano (Eds.), Experimental Vibration Analysis for Civil Engineering Structures, EVACES 2025 - Volume 1 (pp. 986-996). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-96110-6_98

Luo, Q., Li, Z., Li, Y. & Petrov, M. (2025). Living microbial cement supercapacitors with reactivatable energy storage. Cell Reports Physical Science, 6(9), Article 102810. https://doi.org/10.1016/j.xcrp.2025.102810

Tao, L., Huang, L., Zhao, X., Clausen, J., Zhang, Q., Jiao, B. & Zhu, H. (2025). An exact implementation of the generalized Zhang-Zhu criterion for elasto-plastic finite element calculations. Journal of Rock Mechanics and Geotechnical Engineering, 17(7), 4527-4538. https://doi.org/10.1016/j.jrmge.2024.09.043

Tcherniak, D., Talasila, P., Ulriksen, M. D., Abbiati, G., Mahato, S. & Jensen, A. M. D. (2025). Efficient system identification, model updating, and virtual sensing in the Digital-Twin-as-a-Service software platform. In M. Dohler, A. Melot & M. A. Lopez (Eds.), Proceedings of the 11th International Operational Modal Analysis Conference, IOMAC 2025 (pp. 271-279). International Operational Modal Analysis Conference (IOMAC). https://iomac2025.sciencesconf.org/596439/document

Peng, Y., Chang, T., Yue, J., Zhang, Z. & Andersen, L. V. (2025). Semiactive Control and Reliability Analysis for Vibration Mitigation of Spar-Type Floating Offshore Wind Turbines under Stochastic Wind and Waves. Journal of Engineering Mechanics, 151(11), Article 04025060. https://doi.org/10.1061/JENMDT.EMENG-8400

Stamenov, D., Abbiati, G. & Sauder, T. (2025). Numerical estimation of generalized frequency response functions from time series data using NARX. Mechanical Systems and Signal Processing, 239, Article 113278. https://doi.org/10.1016/j.ymssp.2025.113278

Stamenov, D., Rogne, Y., Abbiati, G. & Sauder, T. (2025). Comparison of empirical methods for estimation of quadratic transfer functions of low-frequency hydrodynamic loads. Ocean Engineering, 341(3), Article 122582. https://doi.org/10.1016/j.oceaneng.2025.122582

Yildirim, H. C. (2025). Predicting fast crack propagation in welded steel plates with random flaws using Recurrent Neural Networks. Advanced Engineering Informatics, 68(Part C), Article 103671. https://doi.org/10.1016/j.aei.2025.103671

Tsarpalis, D., Vamvatsikos, D., Lachanas, C., Chatzidaki, A., Vassiliou, M., Struja, K. C., Konstantinidis, D., Adam, C., Kyriakides, N., Kazantzi, A., Bakalis, K., Abbiati, G., Delladonna, F., Fabbri, G., Sutera, L., Lanese, I. & O’Reilly, G. J. (2025). Experimental Investigation of Pallet Sliding in Steel Racking Systems via Shake Table Testing. In G. O’Reilly & G. M. Calvi (Eds.), Engineering Research Infrastructures for European Synergies - Proceedings of ERIES-IW2025 (pp. 194-205). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-98893-6_19

Wu, M. (2025). A study on two methods to strengthen cement-based materials. Paper presented at 4th International Conference of Sustainable Building Materials , Eindhoven, Netherlands.

Hagsten, L. G. & Fisker, J. (2024). Strain Capacity of Reinforced Concrete Disks. Bygningsstatiske Meddelelser, 94(2), 1-22. Article 2.

Li, J. K., Bak, A. K., Mangliár, L., Hudert, M. M. & Andersen, L. V. (2025). Effect of design configuration on global stiffness of volumetric timber modules. In K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (Eds.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (pp. 3175-3184). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0387

Li, J. K., Andersen, L. V. & Hudert, M. M. (2025). Circular design for urban densification through extension construction. In K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (Eds.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (pp. 2403-2411). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0293

Stamenov, D., Jenssen, Y., Abbiati, G. & Sauder, T. (2025). Application of optimal experimental design for identifying low-frequency hydrodynamic loads. Ocean Engineering, 339(2), Article 122063. https://doi.org/10.1016/j.oceaneng.2025.122063

Ding, S., Wang, J., Şahmaran, M. & Han, B. (2025). Editorial: Nano science and technology in concrete composites. Frontiers in Materials, 12, Article 1624153. https://doi.org/10.3389/fmats.2025.1624153

Sørensen, K. K. (2006). Influence of Viscosity and Ageing on the Behaviour of Clays. University College London.

Kabel, T. (2021). Mapping Breaking Ocean Waves using Novel LIDAR Equipment. [PhD thesis, Aarhus University]. Aarhus Universitet.

Wu, M. (2014). Using low temperature calorimetry and moisture fixation method to study the pore structure of cement based materials.

Kristoffersen, J. C. (2022). Direct effect of wind on wave-induced loading. [PhD thesis, Aarhus University]. Aarhus Universitet.

Yildirim, H. C. (2013). Design aspects of high strength steel welded structures improved by high frequency mechanical impact (HFMI) treatment.

Andersen, L. (2002). Wave propagation in infinite structures and media. Aalborg Universitet.

Fisker, J. (2014). Shear Capacity of Reinforced Concrete Beams Without Shear Reinforcement.

Hu, H., Ma, X., Zuo, J., She, A., Wei, Y., Yao, W. & Wu, M. (2025). High-volume fly ash mortar mixes containing waste dolomite powders: Early-age properties, hydration characteristics, microstructure, and sustainability assessment. Construction and Building Materials, 484, Article 141899. https://doi.org/10.1016/j.conbuildmat.2025.141899

Liu, Q., Andersen, L. V., Wu, M., Zhang, M. & Snoeck, D. (2025). Numerical investigations of the abrasion behavior of concrete based on a coupled Eulerian–Lagrangian approach. Computers and Structures, 315, Article 107808. https://doi.org/10.1016/j.compstruc.2025.107808

Hernandez-Guardado, A., Petrella, F. & Franza, A. (2025). Ground movements induced by a deep excavation in Copenhagen: Comparison of prediction methods with monitoring data. In Tunnelling into a Sustainable Future – Methods and Technologies: Proceedings of the ITA-AITES World Tunnel Congress 2025 (WTC 2025), 9-15 May 2025, Stockholm, Sweden (pp. 1460) https://doi.org/10.1201/9781003559047-188

Li, Z., Bai, Y. & Luo, Q. (2025). Influence of humidity conditions on the performance of CO₂-cured LC³. Case Studies in Construction Materials, 22, Article e04747. https://doi.org/10.1016/j.cscm.2025.e04747

Shi, X. & Wu, M. (2025). Cement degradation in CO2-saturated water and the impact of liquid to solid ratio: an experimental and thermodynamic modelling study. Paper presented at 12th International Conference on Fracture Mechanics for Concrete and Concrete Structures, Veinna. https://doi.org/10.21012/FC12.1289

Shen, C., Zhang, D., Clausen, J., Wan, Y. & Zhang, G. (2025). Centrifuge Model Tests on Deformation Characteristics of River Embankments Improved by Circular and Grid-Form Deep Mixed Columns. International Journal of Civil Engineering, 23(8), 1503-1520. https://doi.org/10.1007/s40999-025-01103-2

Shi, X., Zhang, C., Gupta, K. K., Ambat, R. & Wu, M. (2025). Risks of cement and rock-cement-metal interface degradation in geological carbon sequestration reservoirs: Mechanisms, influencing factors and mitigation measures. Carbon Capture Science and Technology, 15, Article 100419. https://doi.org/10.1016/j.ccst.2025.100419

Pizarro, D., Kovarbašić, M., Abbiati, G. & Stojadinović, B. (2025). Multi-Axial Subassemblage Testing System for Hybrid Simulation With Large-Scale Structural Components. Earthquake Engineering and Structural Dynamics, 54(8), 2084-2105. https://doi.org/10.1002/eqe.4351

Farahani, S., Akhaveissy, A. H. & Damkilde, L. (2025). Towards a modified displacement-based seismic design of braced reinforced concrete frame structures considering soil structure interaction. Structures, 75, Article 108443. https://doi.org/10.1016/j.istruc.2025.108443

Ulfkjaer, J. P., Brosbøl, D. P., Larsen, R. & Clausen, J. (2025). Test and Analysis of Prestressed Ultra High Performance Concrete Beams. In RILEM Bookseries (pp. 184-193). Springer Science and Business Media B.V.. https://doi.org/10.1007/978-3-031-70281-5_21

Ouyang, Q., Lev Yehudi, O., Pandey, J. S., Franza, A., Rocchi, I., Klar, A. & von Solms, N. (2025). Synthesis of CO2 hydrate capsules in partially water-saturated sediment as vessels for underground mechanical energy storage: promoting effect of tetrahydrofuran and cyclopentane. Fluid Phase Equilibria, 595, Article 114428. https://doi.org/10.1016/j.fluid.2025.114428

Wang, J. & Wu, M. (2025). A preliminary study on an effective and simplistic self-healing concept for cement using coarse clinker particles as the healing agent. Cement and Concrete Research, 193, Article 107859. https://doi.org/10.1016/j.cemconres.2025.107859

Modé, P., Demartino, C., Georgakis, C. T. & Lagaros, N. D. (2025). Short-term extreme wind speed forecasting using dual-output LSTM-based regression and classification model. Journal of Wind Engineering and Industrial Aerodynamics, 259, Article 106035. https://doi.org/10.1016/j.jweia.2025.106035

Han, F., Wang, J., Ji, X., Chen, S., Liu, J., Wu, M. & Liu, J. (2025). Insights into the hydration kinetics and microstructural evolution of ultra-high performance cementitious composite at mid-to-low curing temperatures. Construction and Building Materials, 468, Article 140403. https://doi.org/10.1016/j.conbuildmat.2025.140403

Miah, M. J., Thygesen, J., Simonsen, M. E., Nielsen, R. P. & Wu, M. (2025). Strengthening the bulk properties of cement mortar through promoted in-situ formation of hydroxyapatite: Feasibility and perspectives. Construction and Building Materials, 459, Article 139773. https://doi.org/10.1016/j.conbuildmat.2024.139773

Zhang, F., Pang, K., Li, J., Xu, W., Du, J., Wang, J., Zhang, J., Liu, Q. & Xiao, H. (2025). Effect of micro-cellulose fiber on the mechanical, shrinkage properties and ballistic impact resistance of high-performance cement composites. Construction and Building Materials, 463, Article 139963. https://doi.org/10.1016/j.conbuildmat.2025.139963

Oakes, B., Gomes, C., Abbiati, G., Kamburjan, E., Bas, E. E. & Engelsgaard, S. (2024). Towards Ontological Service-Driven Engineering of Digital Twins. In Proceedings: MODELS 2024 - ACM/IEEE 27th International Conference on Model Driven Engineering Languages and Systems: Companion Proceedings (pp. 464-469). Association for Computing Machinery. https://doi.org/10.1145/3652620.3688261

Displaying results 1 to 50 out of 825

Back to the main page

Revised 13.11.2025

AU Engineering