Department of Civil and Architectural Engineering

Aarhus University Seal
 Department of Civil and Architectural Engineering About the department Sections - research and development Design & Construction Publications

Publications by Design & Construction

Are you looking for publications by the Section of Design & Construction? On this page you can find all the publications made by the Section of Design & Construction - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Shende, M. K., Feijoo-Lorenzo, A. E. & Bokde, N. D. (2022). cleanTS: Automated (AutoML) tool to clean univariate time series at microscales. Neurocomputing, 500, 155-176. https://doi.org/10.1016/j.neucom.2022.05.057
Li, J. K. (2026). Circular Timber Construction by System-level Modularity and Component-level Optimisation. [PhD dissertation, Aarhus University].
Li, J. K., Andersen, L. V. & Hudert, M. M. (2025). Circular design for urban densification through extension construction. In K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (Eds.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (pp. 2403-2411). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0293
Al-Khiami, M. I., Lindhard, S. M. & Wandahl, S. (2024). Charting the Exoskeleton Industry: A Comprehensive Insight into Dynamics and Trends. In 12th Nordic Conference on Construction Economics and Organisation (1 ed., Vol. 1389) https://doi.org/10.1088/1755-1315/1389/1/012014
Chen, G. (2021). CFD Modeling of Urban Wind Flow and Thermal Conditions - Steady and Unsteady Analysis with Solar-Induced Non-Uniform Thermal Boundary Conditions. [PhD dissertation, Aarhus University]. Aarhus Universitet.
Lerche, J., Lindhard, S., Enevoldsen, P., Neve, H. H., Møller, D. E., Jacobsen, E. L., Teizer, J. & Wandahl, S. (2023). Causes of delay in offshore wind turbine construction projects. Production Planning & Control, 34(15), 1513-1526. https://doi.org/10.1080/09537287.2022.2026673
Lerche, J., Neve, H. H., Wandahl, S. & Gross, A. (2022). Categorization of the Offshore Wind Production System. International Journal of Operational Research, 43(3), 299-317. https://doi.org/10.1504/IJOR.2022.122338
Purup, P. B., Petersen, S., Ferguson Dunn, A., Gkaintazi-Masouti, M. & Visa, O. (2020). Building Performance Simulation Supporting Typical Design Activities: The Case Of ‘Volume Massing’. 770-775. Paper presented at 35th Passive Low-Energy Architecture (PLEA), Coruna, Spain. https://www.researchgate.net/publication/344404638_Building_Performance_Simulation_Supporting_Typical_Design_Activities_The_Case_of_'Volume_Massing'
Salling, S., Perez, C. T. & Wandahl, S. (2022). Breakdown Work Sampling. In Proceedings of the 30th Annual Conference of the International Group for Lean Construction (IGLC) (pp. 223-234). IGLC. https://doi.org/10.24928/2022/0125
Bugenings, L. A. & Kamari, A. (2022). Bioclimatic Architecture Strategies in Denmark: A Review of Current and Future Directions. Buildings, 12(2), Article 224. https://doi.org/10.3390/buildings12020224
Johansen, K. W., Schultz, C. P. L. & Teizer, J. (2022). BIM-based fall hazard ontology and benchmark model for comparison of automated prevention through design approaches in construction safety. In J. Teizer & C. P. Leslie Schultz (Eds.), Proceedings of the 29thEG-ICE International Workshop on Intelligent Computing in Engineering (pp. 408-417) https://doi.org/10.7146/aul.455.c231
Osterhaus, W. & Cornelius, W. (2020). Beleuchtung mit Tageslicht. In D. Seifert & M. Barfuss (Eds.), Beleuchtungstechnik: Grundlagen (5. Auflage ed., pp. 445-475). Huss Medien.
Johansen, K. W., Pimentel de Figueiredo, R., Golovina, O. & Teizer, J. (2021). Autonomous Safety Barrier Inspection in Construction: An Approach Using Unmanned Aerial Vehicles and SafeBIM. In C. Feng, T. Linner & I. Brilakis (Eds.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021 (pp. 629-636) https://doi.org/10.22260/ISARC2021/0085
Jacobsen, E. L. (2024). Automating the Monitoring of Construction Labor Operations Using Wearable Sensors and Machine Learning. [PhD dissertation, Aarhus University]. Aarhus University.
Jacobsen, E. L. & Teizer, J. (2022). Automating the Estimation of Productivity Metrics for Construction Workers Using Deep Learning and Kinematics. In J. Teizer & C. P. Leslie Schultz (Eds.), Proceedings of the 29th EG-ICE International Workshop on Intelligent Computing in Engineering (pp. 418-427) https://doi.org/10.7146/aul.455.c232
Harichandran, A. & Teizer, J. (2022). Automated Recognition of Hand Gestures for Crane Rigging using Data Gloves in Virtual Reality. In Proceedings of the 39th International Symposium on Automation and Robotics in Construction, ISARC 2022 (pp. 304-311). International Association for Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2022/0043
Johansen, K. W., Nielsen, R., Schultz, C. & Teizer, J. (2021). Automated activity and progress analysis based on non-monotonic reasoning of construction operations. Smart and Sustainable Built Environment, 10(3), 457-486. https://doi.org/10.1108/SASBE-03-2021-0044
Beatini, V. & Dias, M. A. (2022). A unifying approach to kinetic structures composed by bar or plate 4R-linkages. Extreme Mechanics Letters, 55, Article 101833. https://doi.org/10.1016/j.eml.2022.101833
Huang, T., Rong, L., Zhang, G., Brandt, P., Bjerg, B. S., Pedersen, P. & Granath, S. W. L. (2021). A two-node mechanistic thermophysiological model for pigs reared in hot climates: Part 1: Physiological responses and model development. Biosystems Engineering, 212, 302-317. https://doi.org/10.1016/j.biosystemseng.2021.08.024
Huang, T., Rong, L., Zhang, G., Brandt, P., Bjerg, B. S., Pedersen, P. & Granath, S. W. L. (2021). A two-node mechanistic thermophysiological model for pigs reared in hot climates: Part 2: Model performance assessments. Biosystems Engineering, 212, 318-335. https://doi.org/10.1016/j.biosystemseng.2021.08.021
Jensen, S. R., Kirkegaard, P. H., Postiglione, G. & Strange, A. (2019). A tectonic aproach to energy renovation of dwellings: the case of Gellerup. In P. J. S. Cruz (Ed.), Structures and architecture: bridging the gap and crossing borders (pp. 99-108). CRC Press. https://books.google.dk/books?id=mQSiDwAAQBAJ&pg=PA99&dq=%22A+tectonic+approach+to+energy+renovation+of+dwellings+-+The+case+of+Gellerup%22&hl=da&sa=X&ved=0ahUKEwiV5sToye7mAhVRLFAKHaE5CzgQ6AEIJzAA#v=onepage&q=%22A%20tectonic%20approach%20to%20energy%20renovation%20of%20dwellings%20-%20The%20case%20of%20Gellerup%22&f=false
Mølmen, I., Grim, H. L., Jacobsen, E. L. & Teizer, J. (2021). Asymmetrical Multiplayer Serious Game and Vibrotactile Haptic Feedback for Safety in Virtual Reality to Demonstrate Construction Worker Exposure to Overhead Crane Loads. In C. Feng, T. Linner & I. Brilakis (Eds.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021 (pp. 613-620) https://doi.org/10.22260/ISARC2021/0083
Shewale, A., Mokhade, A., Funde, N. & Bokde, N. D. (2022). A Survey of Efficient Demand-Side Management Techniques for the Residential Appliance Scheduling Problem in Smart Homes. Energies, 15(8), Article 2863. https://doi.org/10.3390/en15082863
Li, J., Hudert, M. M. & Andersen, L. V. (2024). A study of internal stiffeners in wooden slab panels obtained by topology optimisation. In Proceedings of the IASS 2024 Symposium: Redefining the Art of Structural Design International Association for Shell and Spatial Structures (IASS).
Tagliabue, L. C., Mastrolembo Ventura, S., Teizer, J. & Ciribini, A. L. C. (2021). A serious game for lean construction education enabled by internet of things. In Ó. Mealha, M. Rehm & T. Rebedea (Eds.), Ludic, Co-design and Tools Supporting Smart Learning Ecosystems and Smart Education - Proceedings of the 5th International Conference on Smart Learning Ecosystems and Regional Development, SLERD 2020 (pp. 225-233). Springer. https://doi.org/10.1007/978-981-15-7383-5_19
Rasmussen, M. K., Pakanen, M. & Heiselberg, K. (2024). A review of visual strategies in pictorials. In C&C 2024: Proceedings of the 16th Conference on Creativity & Cognition (pp. 211-228). Association for Computing Machinery. https://doi.org/10.1145/3635636.3656212
Gamborg HEINZL, L., Beatini, V. & Kirkegaard, P. H. (2021). A Retractable Roof Pavilion - Future & Precedent. In S. A. Behnejad, G. A. R. Parke & O. A. Samavati (Eds.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).
Hudert, M. M. & Mangliar, L. (2023). A reconfigurable construction system based on hypar timber components. In IASS 2023 Melbourne Symposium: Design Competition (WG21) (pp. 1-7). International Association for Shell and Spatial Structures (IASS).
Christensen, L., Hauge Broholt, T. & Petersen, S. (2022). Are bedroom air temperatures affected by temperature boosts in adjacent rooms?. Paper presented at CLIMA 2022: the 14th REHVA HVAC World Congress, Rotterdam, Netherlands. https://doi.org/10.34641/clima.2022.38
Jensen, S. R. (2022). Architectural strategies for promoting well-being in sustainable renovation of social housing. [PhD dissertation, Aarhus University]. Aarhus Universitet. https://doi.org/10.7146/aulsps-e.484
Purup, P. B. (2021). A practice-oriented approach to the development of building performance simulation tools fit for the early stages of building design. [PhD dissertation, Aarhus University]. Aarhus Universitet. https://www.researchgate.net/publication/359578693_A_practice-oriented_approach_to_the_development_of_building_performance_simulation_tools_fit_for_the_early_stages_of_building_design?_sg%5B0%5D=KeReLbFnI5aCLnHv-mvr3GpwlcOnSt2jDsBcLmyAmueLIoGGET5LUleGI-kBJVrrt4Fcy864VToYb4Z2vckBOocphs9CvMeTBm-rc_ka.t4MaWko5eD4iiTUTbsGTq6zDk1SMrdzfja22aw-AiQ-DbXI5mh8frxKf5vv4BeULzw2SMVCmti9U3Gjf38e3VQ&_tp=eyJjb250ZXh0Ijp7ImZpcnN0UGFnZSI6InByb2ZpbGUiLCJwYWdlIjoicHJvZmlsZSIsInBvc2l0aW9uIjoicGFnZUNvbnRlbnQifX0
Osterhaus, W., Erhardtsen, I. & Fodor, K. E. (2019). Applying the New European Daylight Standard to Enhance Daylight Quality in Dense Urban Environments. Poster session presented at 8th VELUX International Daylighting Symposium, Paris, France.
Dickow, K. A., Domadiya, P. G., Andersen, L. V. & Kirkegaard, P. H. (2011). A Parameter Study of Coupling Properties in Finite Element Models of Single-Stud Double-Plate Panels. In Congress Program and Abstracts inter-noise 2010: 40th international congress and exposition on noise control engineering "Sound Environment as a Global Issue" (pp. 294). The Institute of Noise Control Engineering of Japan (NCE/J).
Jacobsen, E. L., Teizer, J. & Wandahl, S. (2023). An On-body Sensor-based Visual Management Tool for Work Task Progress Monitoring. In The 30th EG-ICE: International Conference on Intelligent Computing in Engineering (pp. 959-968) https://www.ucl.ac.uk/bartlett/construction/sites/bartlett_construction/files/an_on-body_sensor-based_visual_management_tool_for_work_task_progress_monitoring_0.pdf
Huang, T., Zhang, G., Brandt, P., Bjerg, B., Pedersen, P. & Rong, L. (2022). An effective temperature derived from a mechanistic thermophysiological model for sows reared in hot climates. Biosystems Engineering, 220, 19-38. https://doi.org/10.1016/j.biosystemseng.2022.05.015
Beatini, V., Aita, D., Garavaglia, E., Caruso, H. & Sgambi, L. (2024). An atypical flat arch in Prato Cathedral: some remarks on the non-standard plastic behaviour of stone structures. Abstract from XXVI AIMETA Congress
Italian Association of Theoretical and Applied Mechanics, Naples, Italy.
Abu-Ghaida, H. & Kamari, A. (2021). An alternative approach to material and EPD mapping in the development of BIM-based LCA and LCC tools. In Proceedings of the 38th International Conference of CIB W78, Luxembourg, 13-15 October: Joint Conference CIB W78 - LDAC 2021 (pp. 782-792). Article 78. http://itc.scix.net/paper/w78-2021-paper-078
Lerche, J., Neve, H. H., Gross, A. & Wandahl, S. (2021). A Model to Link Takt Schedules and Operations in Construction. In L. F. Alarcón & V. A. González (Eds.), Lean Construction in Crisis Times: Responding to the Post-Pandemic AEC Industry Challenges (pp. 667-676). Pontificia Universidad Católica del Perú. https://doi.org/10.24928/2021/0111
Christensen, L. R. L., Broholt, T. H., Barthelmes, V. M., Khovalyg, D. & Petersen, S. (2022). A mixed-methods case study on resident thermal comfort and attitude towards peak shifting of space heating. Energy and Buildings, 276, Article 112501. https://doi.org/10.1016/j.enbuild.2022.112501
Montanari, P., Vitali, A. & Ferraretto, V. (2025). Air pollution and subjective wellbeing: exploring the link between PM10 and a composite measure of wellbeing. Population and Environment, 47(4), Article 38. https://doi.org/10.1007/s11111-025-00504-8
Bokde, N. D., Johansen, K. W., Wandahl, S. & Teizer, J. (2021). A Digital Twin Framework for Equipment Emissions from Construction Site Operations. Proceedings of the International Conference on Construction Applications of Virtual Reality (CONVR), 2021.
Beatini, V., Pantilimonescu, F., Djebbara, Z. & Drișcu, M. C. (2024). Adaptive facades for emotionally enriching indoor environments. Journal of Building Engineering , 98, Article 111472. https://doi.org/10.1016/j.jobe.2024.111472
Pantilimonescu, F. & Beatini, V. (2025). Adaptive Façades for Activity-Specific Well-Being: Exploring emotional responses with virtual reality and machine learning. In A. G. Sorguç, M. K. Yemişcioğlu, S. B. Erol, M. E. Bük, D. Güney, B. A. Sulayıcı & M. Akol (Eds.), Proceedings of the 43rd Conference on Education and Research in Computer Aided Architectural Design in Europe, eCAADe 2025: 43rd Education and Research in Computer Aided Architectural Design in Europe (pp. 421-430). Article 170 https://doi.org/10.52842/conf.ecaade.2025.1.421
Jacobsen, E. L., Solberg, A., Golovina, O. & Teizer, J. (2022). Active personalized construction safety training using run-time data collection in physical and virtual reality work environments. Construction Innovation, 22(3), 531-553. https://doi.org/10.1108/CI-06-2021-0113
Harichandran, A. & Teizer, J. (2022). A Critical Review on Methods for the Assessment of Trainees' Performance in Virtual Reality-based Construction Safety Training. In Proceedings of the 29th EG-ICE International Workshop on Intelligent Computing in Engineering (pp. 439-448) https://doi.org/10.7146/aul.455.c234
Harichandran, A., Johansen, K. W., Jacobsen, E. L. & Teizer, J. (2021). A Conceptual Framework for Construction Safety Training using Dynamic Virtual Reality Games and Digital Twins. In C. Feng, T. Linner & I. Brilakis (Eds.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction, ISARC 2021 (pp. 621-628) https://doi.org/10.22260/ISARC2021/0084
Goutam, B., Hashimi, M. F., Geem, Z. W. & Bokde, N. (2022). A Comprehensive Review of Deep Learning Strategies in Retinal Disease Diagnosis Using Fundus Images. IEEE Access, 10, 57796-57823. https://doi.org/10.1109/ACCESS.2022.3178372
Naik, B. T., Hashmi, M. F. & Bokde, N. D. (2022). A Comprehensive Review of Computer Vision in Sports: Open Issues, Future Trends and Research Directions. Applied Sciences (Switzerland), 12(9), Article 4429. https://doi.org/10.3390/app12094429
Kamari, A. & Schultz, C. P. L. (2022). A combined principal component analysis and clustering approach for exploring enormous renovation design spaces. Journal of Building Engineering , 48, Article 103971. https://doi.org/10.1016/j.jobe.2021.103971
Sousa Santos, R., Pimenta do Vale, C., Bogoni, B. & Kirkegaard, P. H. (2021). Abordagem, projeto e métodos de investigação qualitativa em contexto educacional. In P. A. de Castro, S. Sá, A. C. Temer, M. González Sanmamed & R. Arellano Saavedra (Eds.), Qualitative Research in Education: advances and challenges (Vol. 7, pp. 181-189). Ludomedia. https://doi.org/10.36367/ntqr.7.2021.181-189

Displaying results 201 to 250 out of 251

Previous

1

2

3

4

5

6

Next

Revised 13.11.2025
-
AU Engineering