Publications by Design & Construction

Are you looking for publications by the Section of Design & Construction? On this page you can find all the publications made by the Section of Design & Construction - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Knudsen, M. D., Georges, L., Skeie, K. S. & Petersen, S. (2021). Experimental test of a black-box economic model predictive control for residential space heating. Applied Energy, 298, Article 117227. https://doi.org/10.1016/j.apenergy.2021.117227

Hagsten, L. G. (2024). Experimental study of circular point foundations with minimal reinforcement subjected by distributed load. Bygningsstatiske Meddelelser, 94(1), 25-43. Article 1.

Hudert, M. M., Aranha, C. A. & Fink, G. (2021). Experimental Investigation of Interlocking Birch Plywood Structures. Poster session presented at 2020 World Conference on Timber Engineering, Santiago, Chile.

Aranha, C. A., Hudert, M. M. & Fink, G. (2021). Experimental Investigation of Interlocking Birch Plywood Structures. In World Conference on Timber Engineering, WCTE2020 (pp. 155-163). Sage Journals. https://doi.org/10.1177/09560599211022219

Gentile, N., Lee, E. S., Osterhaus, W., Altomonte, S., Naves David Amorim, C., Ciampi, G., Garcia-Hansen, V., Maskarenj, M., Scorpio, M. & Sibilio, S. (2022). Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies. Energy and Buildings, 268, Article 112191. https://doi.org/10.1016/j.enbuild.2022.112191

Martinez Ribon, J. G. T., Perez, C. T., Wandahl, S. & Salling, S. T. (2024). Evaluating the feasibility of smartwatches for allocating workers' time into workspaces on jobsites. In Proceedings of the 41st International Conference of CIB W78 CIB.

Al-Khiami, M. I., Lindhard, S. M. & Wandahl, S. (2025). Evaluating industrial exoskeletons for performance and fatigue in lifting tasks. Organization, Technology & Management in Construction, 17(1), 204-217. https://doi.org/10.2478/otmcj-2025-0012

Altomonte, S., Amorim, C. N. D., Ciampi, G., Garcia-Hansen, V., Gentile, N., Gkaintatzi-Masouti, M., Osterhaus, W., Obradovic, B., Pham, K., Scorpio, M. & Sibilio, S. (2021). Energy Saving potential of user-centered integrated lighting solutions: A literature review: Research Report from Subtask D of IEA SHC Task 61 / EBC Annex 77 Integrated Solutions for Daylighting and Electric Lighting: From Component to User-Centered System Efficiency. https://doi.org/10.18777/ieashc-task61-2021-0013

Gentile, N., Osterhaus, W., Altomonte, S., Garcia Alvarez, M., Garcia-Hansen, V., Amorim, C. N. D. & Obradovic, B. (2019). Energy-Saving Potential for Integrated Daylighting and Lighting Design via User-Driven Solutions: A Literature Review. In Proceedings of the 29th CIE SESSION : CIE x046:2019 (Vol. 1, pp. 205-215). CIE. https://doi.org/10.25039/x46.2019.OP32

Erhardtsen, I., Osterhaus, W., Støttrup, K. F., Derengowski, N., Gkaintatzi-Masouti, M., Nielsen, K. G., Markvart, J., Dobos, F., Stoffer, S., Reinholt, P., Schauer, J. & Pedersen, A. (2020). Energievaluering af dynamisk døgnrytmelys. Pictures, Video and sound recordings (digital), Dansk Center for Lys. https://www.youtube.com/watch?v=QPqsiQ8RYaM

Mangliar, L. & Hudert, M. M. (2022). Enabling circularity in building construction: Experiments with robotically assembled interlocking structures. In M. Frier Hvejsel & P. J.S. Cruz (Eds.), Structures and Architecture A Viable Urban Perspective? (pp. 585-593). CRC Press. https://doi.org/10.1201/9781003023555

Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Ringparken.

Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Holbergshaven.

Wandahl, S., Salling, S. T. & Perez, C. T. (2023). Effektiv Byggeproduktion. Case: Bartholin.

Hauge Broholt, T., Christensen, L. & Petersen, S. (2022). Effect of measurement resolution on data-based models of thermodynamic behaviour of buildings. Paper presented at CLIMA 2022: the 14th REHVA HVAC World Congress, Rotterdam, Netherlands. https://doi.org/10.34641/clima.2022.196

Li, J. K., Bak, A. K., Mangliár, L., Hudert, M. M. & Andersen, L. V. (2025). Effect of design configuration on global stiffness of volumetric timber modules. In K. Rischmiller, M. A. Saleem, C. Downey, J. Gattas, D. Hossy, L. Ottenhaus, W. Wu, Y. Zhang & Z. Yan (Eds.), Proceedings from the 14th World Conference on Timber Engineering: Advancing Timber for the Future Built Environment, WCTE 2025 (pp. 3175-3184). World Conference on Timber Engineering (WCTE). https://doi.org/10.52202/080513-0387

Beatini, V. & Tasora, A. (2021). Early experimentations within the masonry barrel vault. In S. A. Behnejad, G. A. R. Parke & O. A. Samavati (Eds.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).

Andersen, L. V., Mangliar, L., Hudert, M. M., Flodén, O. & Persson, P. (2023). Early assessment of the vibroacoustic performance of large lightweight buildings. In A. Zingoni (Ed.), Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems - Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2022: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa (Vol. 1, pp. 49-55). CRC Press. https://doi.org/10.1201/9781003348443-8

Gall Krogh, P. & Koskinen, I. (2021). Drifing by Intention - Four Epistemic traditions in Constructive Design Research. In Extended Abstracts of the 2021 CHI Conference on Human Factors in Computing Systems, CHI EA 2021 Article 146 Association for Computing Machinery. https://doi.org/10.1145/3411763.3445000

Schultz, C. P. L. & Kamari, A. (2021). Diversity in Renovation Design: Theoretical Foundations of the Renovation Domain Model. Journal of Computing in Civil Engineering, 35(4), Article 04021006. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000969

Kamari, A., Schultz, C. P. L. & Petersen, S. (Eds.) (2022). Digital Sustainability in Building Design: Special issue. Sustainability https://www.mdpi.com/journal/sustainability/special_issues/digital_building

Sousa Santos, R., Pimenta do Vale, C., Bogoni, B. & Kirkegaard, P. H. (2021). DIDACTICS AND CIRCUMSTANCE: EXTERNAL REPRESENTATIONS IN ARCHITECTURAL DESIGN TEACHING. In Z. Adil, E. An & A. Marey (Eds.), Online Education: Teaching In a Time of Change (pp. 104-112). Architecture media politics society (AMPS). https://www.researchgate.net/publication/356443091_Didactics_and_circumstance_External_representations_in_architectural_design_teaching

Kotula, B. M. & Kamari, A. (2020). Development of a BIM-based LCA Tool to Support Sustainable Building Design during the Early Design Stage. In A. Ghaffarianhoseini, A. Ghaffarianhoseini & N. Naismith (Eds.), ANZAScA 2020 - 54th International Conference of the Architectural Science Association: Imaginable Futures: Design Thinking, and the Scientific Method (pp. 395-404). The Architectural Science Association. https://anzasca.net/paper/development-of-a-bim-based-lca-tool-to-support-sustainable-building-design-during-the-early-design-stage/

Henriksen, T., Lo, S., Knaack, U. & Kirkegaard, P. H. (2023). Developing and testing a novel manufacturing method for complex geometry thin-walled GFRC panels by fabricating a 10m high, self-supporting GFRC hyperbolic shell. Architectural Engineering and Design Management, 19(5), 480-510. Article 2096557. https://doi.org/10.1080/17452007.2022.2096557

Harichandran, A. (2019). Determination of Automated Construction Operations from Sensor Data Using Machine Learning. In 4th International Conference on Civil and Building Engineering Informatics (ICCBEI 2019) https://www.academia.edu/41057396/Determination_of_Automated_Construction_Operations_from_Sensor_Data_Using_Machine_Learning

Agkathidis, A., Hudert, M. & Medel-Vera, C. (2026). Designing with Algorithms: A Historical Journey of Artificial Intelligence. In SpringerBriefs in Architectural Design and Technology (pp. 3-13). Springer. https://doi.org/10.1007/978-981-95-0760-3_1

Nordstrøm Rasmussen, C., Pakanen, M. A. & Petersen, M. G. (2021). Designing Socially Acceptable Light Therapy Glasses for Self-managing Seasonal Affective Disorder. In J. Häkkilä, P. Lopes, T. Kosch, J. Nishida, P. Strohmeier & Y. Abdelrahman (Eds.), Proceedings - AHs 2021: Augmented Humans Conference 2021 (pp. 307-312). Association for Computing Machinery. https://doi.org/10.1145/3458709.3458995

Fathollahi, A. & Beatini, V. (2025). Design Concept of Variable, Flat Cut Bending-Active Shells. Architecture, Civil Engineering, Environment, 18(1), 97-111. https://doi.org/10.2478/acee-2025-0008

Fathollahi, A. & Beatini, V. (2024). Design and analysis of bending-active configurations through an initial flat-cut pattern based on the curvature lines. International Journal of Space Structures, 39(3), 145-156. https://doi.org/10.1177/09560599241249856

Thulasya Naik, B., Hashmi, M. F., Geem, Z. W. & Bokde, N. D. (2022). DeepPlayer-Track: Player and Referee Tracking With Jersey Color Recognition in Soccer. IEEE Access, 10, 32494-32509. https://doi.org/10.1109/ACCESS.2022.3161441

Jacobsen, E. L. & Teizer, J. (2022). Deep Learning in Construction: Review of Applications and Potential Avenues. Journal of Computing in Civil Engineering, 36(2), Article 03121001. https://doi.org/10.1061/(ASCE)CP.1943-5487.0001010

Hudert, M. M., Elvebakken, M. F., Meagher, M., Mangliar, L., Zhang, X. & Esterle, L. (2022). Deep learning enhanced robotic fabrication of timber-to-timber connections with densified hardwood nails. In Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference: Innovation - Sustainability - Legacy (pp. 1740-1748)

Foldager, L., Kaiser, M. Ø., Chen, G., Jensen, L. D., Kristensen, J. K., Kobek-Kjeldager, C., Thodberg, K., Rong, L. & Herskin, M. S. (2022). Deck height during transport of weaners – piglet height and microclimatic conditions inside trucks. 129-142. Abstract from Symposium i Anvendt Statistik 2022, København, Denmark.

Amato, V., Knudsen, M. D. & Petersen, S. (2020). Data-based calibration of physics-based thermal models of single family houses. In L. Georges, M. Haase, V. Novakovic & P. G. Schild (Eds.), BuildSIM-Nordic 2020 Selected papers (pp. 285-292). SINTEF Academic Press. https://www.sintefbok.no/book/index/1264/buildsim-nordic_2020_selected_papers

Wandahl, S., Perez, C. T., Salling, S. T., H. Hansen, C. H., K. Nielsen, M. & Nissen, T. (2023). Daily Huddles’ Effect on Crew Productivity. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 1255–1266) https://doi.org/10.24928/2023/0183

Teizer, J. & Harichandran, A. (2022). D4. 7–Interactive Visual Material for Workforce Training v1. Cogito. https://cogito-project.eu/wp-content/uploads/2019/02/COGITO_D4.7_Interactive-Visual-Material-for-Workforce-Training-v1_vf.pdf

Pakanen, M. A., Heiselberg, K., Nachtigall, T. R., Broe, M. & Krogh, P. G. (2021). Crafting a Leather Self-tracking Device for Pollen Allergies. In R. Wimmer (Ed.), TEI 2021 - Proceedings of the 15th International Conference on Tangible, Embedded, and Embodied Interaction: TEI '21 (pp. 1-15). Article 96 Association for Computing Machinery. https://doi.org/10.1145/3430524.3446072

Faurholt Obro, L., Heiselberg, K., Gall Krogh, P., Handberg, C., Ammentorp, J., Thybo Pihl, G. & Jörn Sloth Osther, P. (2021). Corrigendum to "Combining mHealth and health-coaching for improving self-management in chronic care. A scoping review" [Patient Educ Couns, 104, 4 (April 2021) 680-688]. Patient Education and Counseling, 104(10), 2601-2601. https://doi.org/10.1016/j.pec.2021.06.035

Wandahl, S., Perez, C. T., Salling, S. T. & Neve, H. H. (2023). Correlation of Construction Workers’ Movement and Direct Work Rates. Journal of Engineering, Project, and Production Management , 13(2), 125-137. https://doi.org/10.32738/JEPPM-2023-0013

Zanabria, E., Murguia, D. & Pérez, C. T. (2025). Construction workers' safety perceptions and job satisfaction: A comparative analysis of Denmark and Peru. Annual Conference of the International Group for Lean Construction, IGLC, 33, 1046-1057. https://doi.org/10.24928/2025/0125

Wandahl, S., Perez, C. T. & Salling, S. T. (2024). Construction Workers’ Perception of Project Management, Work Environment, and Health & Safety. In 12th Nordic Conference on Construction Economics and Organisation (1 ed., Vol. 1389) https://doi.org/10.1088/1755-1315/1389/1/012039

Hudert, M. M. (2021). Connecting lines: Investigating the potential of ruled surface structures for circular construction. In C. Fivet, P. DÁcunto, M. Fernandez Ruiz & P. O. Ohlbrock (Eds.), Proceedings of the International fib Symposium on the Conceptual Design of Structures, 2021 (pp. 469-476) https://doi.org/10.35789/fib.PROC.0055.2021.CDSymp.P057

Huang, T., Zhang, G. & Rong, L. (2022). Conductive heat loss of sows in a ventilated environment identified by steady CFD-CHT modelling considering thermophysiological effects. Computers and Electronics in Agriculture, 199, Article 107142. https://doi.org/10.1016/j.compag.2022.107142

Rahbek, L. W. (2023). Conceptual Design Tool for Structural Layout Optimization in the Early Design Phase. [PhD dissertation, Aarhus University]. Aarhus University. https://doi.org/10.7146/aul.490

Fathollahi, A. & Beatini, V. (2025). Concept Design of Variable Density, Flat Cut Active Bending Shells. Abstract from International Symposium on Architecture, Technology, and Innovation , Izmir, Turkey.

Hudert, M., Lindemann, D., Mangliár, L. & Swann, A. (2024). Computing irregular hypar-based quad-mesh patterns for segmented timber shells. Computer-Aided Design, 177, Article 103772. https://doi.org/10.1016/j.cad.2024.103772

Cao, M., Rong, L., Choi, C. Y., Wang, K. & Wang, X. (2022). Computational evaluation of air jet cooling from a perforated air ducting system to mitigate heat stress of cows in free stalls. Computers and Electronics in Agriculture, 199, Article 107198. https://doi.org/10.1016/j.compag.2022.107198

Rajanayagam, H., Beatini, V., Poologanathan, K. & Nagaratnam, B. (2024). Comprehensive evaluation of flat pack modular building systems: Design, structural performance, and operational efficiency. Journal of Building Engineering , 95, Article 110099. https://doi.org/10.1016/j.jobe.2024.110099

Obro, L. F., Heiselberg, K., Krogh, P. G., Handberg, C., Ammentorp, J., Pihl, G. T. & Osther, P. J. S. (2021). Combining mHealth and health-coaching for improving self-management in chronic care: A scoping review. Patient Education and Counseling, 104(4), 680-688. https://doi.org/10.1016/j.pec.2020.10.026

Neve, H. H., Lerche, J. & Wandahl, S. (2021). Combining Lean Methods to Improve Construction Labour Efficiency in Renovation Projects. In L. F. Alarcon, V. A. Gonzalez, D. Murguia & X. Brioso (Eds.), IGLC 2021 - 29th Annual Conference of the International Group for Lean Construction - Lean Construction in Crisis Times: Responding to the Post-Pandemic AEC Industry Challenges (pp. 647–656). Pontificia Universidad Católica del Perú. https://doi.org/10.24928/2021/0107

Displaying results 151 to 200 out of 251

Revised 13.11.2025

AU Engineering