Department of Civil and Architectural Engineering

Aarhus University Seal
 Department of Civil and Architectural Engineering About the department Sections - research and development Design & Construction Publications

Publications by Design & Construction

Are you looking for publications by the Section of Design & Construction? On this page you can find all the publications made by the Section of Design & Construction - Department of Civil & Architectural Engineering, Aarhus University.

Below you can find a list of all the publications, their publishing date, their author(s), and title. The list can be sorted by date, author, and title:

List of Publications

Sort by: Date | Author | Title

Aita, D., Beatini, V., Garavaglia, E., Paris, V., Pizzigoni, A. & Sgambi, L. (2023). Stone reciprocal structures: suggestions from ancient Greece. Abstract from the IASS Annual Symposium 2023
, Melbourne, Australia.
Rahbek, L. W., Terp, C. R., Alibrandi, U. & Kirkegaard, P. H. (2023). Stock Optimization of Naturally Curved Wood Logs on Freeform Truss Structures. Journal of the International Association for Shell and Spatial Structures, 64(4), 257-265. https://doi.org/10.20898/j.iass.2023.029
Rahbek, L. W., Carsten R. Terp, C., Alibrandi, U. & Kirkegaard, P. H. (2022). Stock optimization of naturally curved wood logs on freeform truss structures. In Proceedings of the IASS 2022 Symposia International Association for Shell and Spatial Structures (IASS). https://www.ingentaconnect.com/contentone/iass/piass/2022/00002022/00000007/art00019?crawler=true&mimetype=application/pdf
Harichandran, A., Wandahl, S. & Andersen, L. V. (2023). State of the art Technologies that Facilitate Transition of Built Environment into Circular Economy. In B. Garcia de Soto, V. Gonzalez & I. Brilakis (Eds.), Proceedings of the 40th International Symposium on Automation and Robotics in Construction (pp. 730-737). International Association on Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2023/0101
Kamari, A. & Jensen, S. R. (Eds.) (2022). Special Issue "Bioclimatic Architecture for Building Renovation". Buildings https://www.mdpi.com/journal/buildings/special_issues/bioclimatic_renovation
Aita, D., Beatini, V., Caruso, H., Garavaglia, E. & Sgambi, L. (2025). Some remarks on non-standard plastic behaviour with Coulomb’s friction starting from an unconventional stone flat arch. Engineering Structures, 326, Article 119539. https://doi.org/10.1016/j.engstruct.2024.119539
Wandahl, S., Lund, L., Neve, H. H. & Jensen, S. R. (2019). Social Sustainability in Modelling of Value Creation in Housing Refurbishment. In I. Lill & E. Witt (Eds.), 10th Nordic Conference on Construction Economics and Organization (pp. 383-391). Emerald Group Publishing. https://doi.org/10.1108/S2516-285320190000002024
Osterhaus, W., Nielsen, K. G., Gkaintatzi-Masouti, M. & Dobos, F. (2021). Slagelse Psychiatric Hospital. Case Study Fact Sheet from Subtask D of IEA SHC Task 61 / EBC Annex 77 Integrated Solutions for Daylighting and Electric Lighting: From Component to User-Centered System Efficiency.
Purup, P. B. & Petersen, S. (2016). Simulation of Natural Ventilation in the Early Design of Near Zero Energy Buildings. In P. Kvols Heiselberg (Ed.), CLIMA 2016 - Proceedings of the 12th REHVA World Congress (Vol. 5). Article 581 Aalborg Universitet. http://vbn.aau.dk/files/233760256/paper_581.pdf
Teizer, J. & Wandahl, S. (2022). Simplified Emissions Measurement System for Construction Equipment. In F. Jazizadeh, T. Shealy & M. J. Garvin (Eds.), Construction Research Congress 2022: Computer Applications, Automation, and Data Analytics (pp. 474-482). American Society of Civil Engineers. https://doi.org/10.1061/9780784483961.050
Hagsten, L. G. (2024). Section force distribution in a square foundation affected by a centrally located point load. Bygningsstatiske Meddelelser, 94(1), 1-24. Article 1.
Li, B., Schultz, C. P. L., Melzner, J., Golovina, O. & Teizer, J. (2020). Safe and Lean Location-based Construction Scheduling. In H. Osumi, H. Furuya & K. Tateyama (Eds.), Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC 2020): From Demonstration to Practical Use - To New Stage of Construction Robot - (pp. 1409-1416). International Association for Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2020/0195
Amato, V., Hedegaard, R. E., Knudsen, M. D. & Petersen, S. (2023). Room-level load shifting of space heating in a single-family house – A field experiment. Energy and Buildings, 281, Article 112750. https://doi.org/10.1016/j.enbuild.2022.112750
Wandahl, S., Pérez, C. T., Salling, S. & Lerche, J. (2022). ROBUSTNESS OF WORK SAMPLING FOR MEASURING TIME WASTE. 247-258. Paper presented at 30th Annual Conference of the International Group for Lean Construction, IGLC 2022, Edmonton, Canada. https://doi.org/10.24928/2022/0127
Wandahl, S., Perez, C. T., Salling, S. & Lerche, J. (2022). Robustness of Work Sampling for Measuring Time Waste. In Proc. 30th Annual Conference of the International Group for Lean Construction (IGLC) (pp. 247-258). IGLC. https://doi.org/10.24928/2022/0127
Sardenberg, V. & Hudert, M. (2024). Robotic positioning of wooden slats for optimized timber slabs. In M. Wessely, V. Savage, P. Didyk & J. Martinez (Eds.), SCF Adjunct '24: Adjunct Proceedings of the 9th ACM Symposium on Computational Fabrication Article 13 Association for Computing Machinery. https://doi.org/10.1145/3665662.3673260
Nosek, Š., Jaňour, Z., Janke, D., Yi, Q., Aarnink, A., Calvet, S., Hassouna, M., Jakubcová, M., Demeyer, P. & Zhang, G. (2021). Review of wind tunnel modelling of flow and pollutant dispersion within and from naturally ventilated livestock buildings. Applied Sciences (Switzerland), 11(9), Article 3783. https://doi.org/10.3390/app11093783
Mangliar, L. & Hudert, M. M. (2022). Re:Shuffle. Paper presented at Fifth International Conference on Structures and Architecture, Aalborg, Denmark.
Hagsten, L. G. (2023). Required anchorage length of reinforcement in circular foundation subjec-ted by a centrally located normal force and supported by a uniformly distributed reaction. Bygningsstatiske Meddelelser, 93(2), 1-12. https://www.dssse.dk/wp-content/uploads/2024/03/DSSSE-foundation-no-3.pdf
Harichandran, A., Raphael, B. & Mukherjee, A. (2023). Relevance of deep sequence models for recognising automated construction activities: a case study on a low-rise construction system. Journal of Information Technology in Construction, 28, 458-481. https://doi.org/10.36680/j.itcon.2023.023
Perez, C. T., Wandahl, S. & Arieldsen, M. (2024). RELATIONSHIP BETWEEN TIME SPENT IN PRODUCTION WORK ACTIVITIES AND PRODUCTION WORKSPACES. In Proceedings of the 32nd Annual Conference of the international Group for Lean Construction (IGLC 32) (Vol. 32, pp. 454-465) https://doi.org/10.24928/2024/0189
Jacobsen, E. L. & Teizer, J. (2021). Real-time LiDAR for Monitoring Construction Worker Presence Near Hazards and in Work Areas in a Virtual Reality Environment. In J. Abualdenien, A. Borrmann, L.-C. Ungureanu & T. Hartmann (Eds.), EG-ICE 2021 Workshop on Intelligent Computing in Engineering, Proceedings: Proceedings (pp. 592-602). Universitätsverlag der TU Berlin. https://doi.org/10.14279/depositonce-12021
Loyola, L. I. & Martinez, J. G. (2025). Real-time energy and CO2 optimization in construction cranes through digital twins and lean construction. Revista de ingeniería de construcción, 40. https://doi.org/10.7764/RIC.00166.21
Pedersen, K. B., Stefankovics, G., Plamenov Nachev, S. & Wandahl, S. (2024). Quantifying and Planning Carbon Emissions in Construction With Location-Based Scheduling. In Proceedings of the 32nd Annual Conference of the International Group for Lean Construction (IGLC32) (Vol. 32, pp. 416–427) https://doi.org/10.24928/2024/0175
Jacobsen, E. L., Teizer, J., Wandahl, S. & Brilakis, I. (2024). Probabilistic forecasting of construction labor productivity metrics. Journal of Information Technology in Construction, 24, 58-83. https://doi.org/10.36680/j.itcon.2024.004
Al-Khiami, M. L., Lindhard, S. & Wandahl, S. (2025). Prevalence of work-related musculoskeletal disorders and associated sociocultural reporting behaviors in Kuwait's construction industry. Work: A Journal of Prevention, Assessment & Rehabilitation, 81(3), 2937-2951. https://doi.org/10.1177/10519815251325780
Agkathidis, A., Hudert, M. & Medel-Vera, C. (2026). Preface. In A. Agkathidis, M. Hudert & C. Medel-Vera (Eds.), Architecture in the AI Era for Research, Practice, and Pedagogy (pp. v). Springer.
Liu, Y., Zhuang, Y., Ji, B., Zhang, G., Rong, L., Teng, G. & Wang, C. (2022). Prediction of laying hen house odor concentrations using machine learning models based on small sample data. Computers and Electronics in Agriculture, 195, Article 106849. https://doi.org/10.1016/j.compag.2022.106849
Pantilimonescu-Cioancă, F., Alibrandi, U. & Beatini, V. (2026). Predicting emotional impact of adaptive façades through Machine Learning, A VR-based study with PAD assessment. Building and Environment, 297, Article 114541. https://doi.org/10.1016/j.buildenv.2026.114541
Martinez Ribon, J. G. T., Giménez, Z., Salazar, L., Alva, L., F Alarcon, L., Yeung, T. & Sacks, R. (2025). Practices and Barriers to the Adoption of Digital Twin Construction in Latin America. In Proceedings of the 33 rd Annual Conference of the International Group for Lean Construction (IGLC33) (Vol. 33, pp. 598-609). IGLC. https://doi.org/10.24928/2025/0238
Jensen, S. R., Gabel, C. H., Petersen, S. & Kirkegaard, P. H. (2022). Potentials for increasing resident wellbeing in energy renovation of multi-family social housing. Indoor and Built Environment, 31(3), 624-644. https://doi.org/10.1177/1420326X211039883
Kamari, A., Petersen, J. H. & Schultz, C. P. L. (2021). Popularizing DGNB in the Danish construction industry: A field study of the industry via a qualitative comparative analysis. In Proceedings of the 38th International Conference of CIB W78, Luxembourg, 13-15 October: Joint Conference CIB W78 - LDAC 2021 (pp. 638-649). Article 64. http://itc.scix.net/paper/w78-2021-paper-064
Hagsten, L. G., van Logtestijn, M. & Laustsen, H. H. (2022). Point foundation. Upper and lower bound solution for point load and upper bound solution for distributed load. Bygningsstatiske Meddelelser, 92(2), 1-13.
Hagsten, L. G. (2023). Point Foundation. Lower Bound Solution for Distributed Load. Bygningsstatiske Meddelelser, 93(1). https://www.dssse.dk/wp-content/uploads/2024/01/DSSSE-foundation-no-2a.pdf
Dahl, M. R., Petersen, C. K., Thomsen, T. & Johnsen, S. S. (2023). PIX pilotprojekt evaluering. Aarhus University. Centre for Educational Development - CED.
Dandu, S. N., Kumar, V., Sengupta, J. & Bokde, N. D. (2022). Performance Analysis of Multilayer Coil Based MI Waveguide Communication System. Computers, Materials and Continua, 72(3), 5287-5300. https://doi.org/10.32604/cmc.2022.026390
Salling, S. T., Perez, C. T. & Wandahl, S. (2023). Perception of Project Management Among Construction Workers: A Survey in Denmark. In Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31) (Vol. 31, pp. 882-893) https://doi.org/10.24928/2023/0124
N. Sharma, A., R. Dongre, S., Gupta, R., Pandey, P. & Bokde, N. D. (2022). Partitioning of Water Distribution Network into District Metered Areas Using Existing Valves. Computer Modeling in Engineering & Sciences, 131(3), 1515-1537. https://doi.org/10.32604/cmes.2022.018867
Rahbek, L. W., Kirkegaard, P. H. & Alibrandi, U. (2021). Parametric grid mapping design tool for freeform surfaces using a genetic algorithm. In S. A. Behnejad, G. A. R. Parke & O. A. Samavati (Eds.), Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures: Inspiring the Next Generation International Association for Shell and Spatial Structures (IASS).
Bugenings, L. A. & Kamari, A. (2022). Overheating in existing and renovated Danish single- and multi-family houses. Journal of Building Engineering , 57, Article 104835. https://doi.org/10.1016/j.jobe.2022.104835
Huang, T. (2022). Optimal cooling for high productive sows in hot climates: [PhD dissertation, Aarhus University]. Aarhus Universitet.
Hagsten, L. G., Fisker, J., Svarre, C. & Frandsen, T. (2022). On the influence of transverse reinforcement type and layout on the shear capacity of thin-weed concrete beams. Bygningsstatiske Meddelelser, 92(2), 15-29. Article 92-2.
Huang, T., Rong, L. & Zhang, G. (2021). On the feasibility of using Neural Networks to model the performance of the precision air distribution in sectioned sow houses. In Proceedings of the 12nd International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC 2021)
Moustapha Doumbia, E., Janke, D., Yi, Q., Zhang, G., Amon, T., Kriegel, M. & Hempel, S. (2021). On finding the right sampling line height through a parametric study of gas dispersion in a NVB. Applied Sciences (Switzerland), 11(10), Article 4560. https://doi.org/10.3390/app11104560
Johansen, K. W., Nielsen, R. O., Schultz, C. P. L. & Teizer, J. (2020). Non-monotonic Reasoning For Automated Progress Analysis Of Construction Operations. In N. Dawood , F. Pour Rahimian, S. Seyedzadeh & M. Sheikhkhoshkar (Eds.), Enabling the Development and Implementation of Digital Twins: Proceedings of the 20th International Conference on Construction Applications of Virtual Reality (pp. 292-303) https://www.researchgate.net/profile/Farzad-Pour-Rahimian/publication/344444905_Enabling_the_Development_and_Implementation_of_Digital_Twins_Proceedings_of_the_20th_International_Conference_on_Construction_Applications_of_Virtual_Reality/links/5fb3ec4445851518fdad5eab/Enabling-the-Development-and-Implementation-of-Digital-Twins-Proceedings-of-the-20th-International-Conference-on-Construction-Applications-of-Virtual-Reality.pdf
Jacobsen, E. L. & Teizer, J. (2022). Neural Networks in the Construction Industry: Knowledge Gaps and Possibilities. In F. Jazizadeh, T. Shealy & M. J. Garvin (Eds.), Construction Research Congress 2022: Computer Applications, Automation, and Data Analytics - Selected Papers from Construction Research Congress 2022 (pp. 1174-1183). American Society of Civil Engineers. https://doi.org/10.1061/9780784483961.123
Yi, Q., Zhang, G., Amon, B., Hempel, S., Janke, D., Saha, C. K. & Amon, T. (2021). Modelling air change rate of naturally ventilated dairy buildings using response surface methodology and numerical simulation. Building Simulation, 14(3), 827-839. https://doi.org/10.1007/s12273-020-0697-z
Petersen, S. & Svendsen, S. (2008). Method for integrated design of low energy buildings with high quality indoor environment. In Proceedings of the 8th symposium of building physics in the nordic countries (Vol. 2, pp. 597 -604 ). Danish Society of Engineers. https://zenodo.org/record/3561377#.Yv9RFi7P270
Petersen, S. (2008). Method for including detailed evaluation of daylight levels in Be06. In Proceedings of the 8th symposium of building physics in the nordic countries (Vol. 3). Danish Society of Engineers.
Pedersen, K. B., Stefankovics, G., Marxen, M. V. & Wandahl, S. (2025). Method for estimating and planning carbon emissions. In Proceedings of the 33rd Annual Conference of the International Group for Lean Construction (IGLC 33) (Vol. 33, pp. 1197-1207) https://doi.org/10.24928/2025/0271

Displaying results 51 to 100 out of 251

Previous

1

2

3

4

5

6

Next

Revised 13.11.2025
-
AU Engineering